Merge pull request #14 from mattermost/master

to me
2015-06-19 08:06:25 -07:00
--- a/README.md
+++ b/README.md
@@ -1,15 +1,15 @@
-**Mattermost Preview<br>**
-**Team Communication Service<br>**
+**Mattermost Preview**  
+**Team Communication Service**  
 **Version 0.40**

-What matters most to your team?
-===============================

-Words have power.<br>
-Mattermost serves teams who use words to shape the future.<br>
-The words you choose are up to you.
+About Mattermost
+================
+
+Mattermost is a team communication service. It brings team messaging and file sharing into one place, accessible across PCs and phones, with archiving and search.
+
+We built Mattermost to help teams focus on what matters most to them. It works for us, we hope it works for you too.

-*- SpinPunch*

 Installing the Mattermost Preview 
 =================================
@@ -18,49 +18,90 @@ You're installing "Mattermost Preview", a pre-released 0.40 version intended for

 That said, any issues at all, please let us know on the Mattermost forum at: http://bit.ly/1MY1kul

-Developer Machine Setup (Mac)
+Local Machine Setup (Docker)
 -----------------------------

-DOCKER SETUP
+### Mac OSX ###

-1. Follow the instructions at http://docs.docker.com/installation/mac/
-<br>a) Use the Boot2Docker command-line utility 
-<br>b) If you do command-line setup use: `boot2docker init eval “$(boot2docker shellinit)”`
+1. Follow the instructions at http://docs.docker.com/installation/mac/  
+    1. Use the Boot2Docker command-line utility  
+    2. If you do command-line setup use: `boot2docker init eval “$(boot2docker shellinit)”`  
 2. Get your Docker IP address with `boot2docker ip`
-3. Add a line to your /etc/hosts that goes `<Docker IP> dockerhost` 
-4. Run `boot2docker shellinit` and copy the export statements to your ~/.bash_profile 
+3. Add a line to your /etc/hosts that goes `<Docker IP> dockerhost`
+4. Run `boot2docker shellinit` and copy the export statements to your ~/.bash\_profile
+5. Run `docker run --name mattermost-dev -d --publish 8065:80 mattermost/platform:helium`
+6. When docker is done fetching the image, open http://dockerhost:8065/ in your browser

-Any issues? Please let us know on our forums at: http://bit.ly/1MY1kul
+### Ubuntu ###
+1. Follow the instructions at https://docs.docker.com/installation/ubuntulinux/ or use the summery below.
+`sudo apt-get update`
+`sudo apt-get install wget`
+`wget -qO- https://get.docker.com/ | sh`
+`sudo usermod -aG docker <username>`
+`sudo service docker start`
+`newgrp docker`
+2. Run `docker run --name mattermost-dev -d --publish 8065:80 mattermost/platform:helium
+3. When docker is done fetching the image, open http://localhost:8065/ in your browser

-GO SETUP
+### Arch ###
+1. Install docker using the following commands
+`pacman -S docker`
+`systemctl enable docker.service`
+`systemctl start docker.service`
+`gpasswd -a <username> docker`
+`newgrp docker`
+2. docker run --name mattermost-dev -d --publish 8065:80 mattermost/platform:helium
+3. When docker is done fetching the image, open http://localhost:8065/ in your browser

-1. Download Go from http://golang.org/dl/ 
+### Notes ###
+If your ISP blocks port 25 then you may install locally but email will not be sent.

-NODE.JS SETUP 
+If you want to work with the latest bits in the repo you can run the cmd  
+`docker run --name mattermost-dev -d --publish 8065:80 mattermost/platform:latest`

-1. Install homebrew from http://brew.sh 
-2. `brew install node`
+You can update to the latest bits by running  
+`docker pull mattermost/platform:latest`

-COMPASS SETUP 
+If you wish to remove mattermost-dev use the following commands  
+1. `docker stop mattermost-dev`
+2. `docker rm -v mattermost-dev`

-1. Make sure you have the latest version of Ruby 
-2. `gem install compass`

-MATTERMOST SETUP 
+AWS Elastic Beanstalk Setup (Docker)
+------------------------------------

-1. Make a project directory for Mattermost, which we'll call **$PROJECT** for the rest of these instructions
-2. Make a `go` directory in your $PROJECT directory 
-3. Open or create your ~/.bash_profile and add the following lines: <br>   `export GOPATH=$PROJECT/go`<br>   `export PATH=$PATH:$GOPATH/bin` <br>then refresh your bash profile with `source ~/.bash_profile`
-4. Then use `cd $GOPATH` and `mkdir -p src/github.com/mattermost` then cd into this directory and run `git clone github.com/mattermost/platform.git` 
-5. If you do not have Mercurial, download it with: `brew install mercurial`
-6. Then do `cd platform` and `make test`. Provided the test runs fine, you now have a complete build environment. 
-7. Use `make run` to run your code
-
-Any issues? Please let us know on our forums at: http://bit.ly/1MY1kul
+1. From the AWS console select Elastic Beanstalk
+2. Select "Create New Application" from the top right.
+3. Name the application and press next
+4. Select "Create a web server" environment.
+5. If asked, select create and AIM role and instance profile and press next.
+6. For predefined configuration select docker. Environment type may be left at default.
+7. For application source, select upload your own and upload Dockerrun.aws.json from docker/Dockerrun.aws.json. Everything else may be left at default.
+8. Select an environment name, this is how you will refer to your environment. Make sure the URL is available then press next.
+9. The options on the additional resources page may be left at default unless you wish to change them. Press Next.
+10. On the configuration details place. Select an instance type of t2.small or larger.
+11. You can set the configuration details as you please but they may be left at their defaults. When you are done press next.
+12. Environment tags my be left blank. Press next.
+13. You will be asked to review your information. Press Launch.
+14. Up near the top of the dashboard you will see a domain of the form \*.elasticbeanstalk.com copy this as you will need it later.
+15. From the AWS console select route 53
+16. From the sidebar select Hosted Zones 
+17. Select the domain you want to use or create a new one.
+18. Modify an existing CNAME record set or create a new one with the name * and the value of the domain you copied in step 13.
+19. Save the record set
+20. Return the Elastic Beanstalk from the AWS console.
+21. Select the environment you created.
+22. Select configuration from the sidebar.
+23. Click the gear beside software configuration.
+24. Add an environment property with the name “MATTERMOST\_DOMAIN” and a value of the domain you mapped in route 53. For example if your domain is \*.example.com you would enter example.com not www.example.com.
+25. Select apply.
+26. Return to the dashboard on the sidebar and wait for beanstalk update the environment.
+27. Try it out by entering the domain you mapped into your browser.

 License
 -------

-This software uses the Apache 2.0 open source license. For more details see: http://bit.ly/1Lc25Sv<br>
+This software uses the Apache 2.0 open source license. For more details see: http://bit.ly/1Lc25Sv  
+

 **XXXXXX TODO: Test install procedures**
--- a/docker/Dockerrun.aws.json
+++ b/docker/Dockerrun.aws.json
@@ -0,0 +1,13 @@
+{
+  "AWSEBDockerrunVersion": "1",
+  "Image": {
+    "Name": "mattermost/platform",
+    "Update": "true"
+  },
+  "Ports": [
+    {
+      "ContainerPort": "80"
+    }
+  ],
+  "Logging": "/var/log/"
+}
--- a/scripts/README_DEV.md
+++ b/scripts/README_DEV.md
@@ -0,0 +1,42 @@
+Developer Machine Setup (Mac)
+-----------------------------
+
+DOCKER SETUP
+
+1. Follow the instructions at http://docs.docker.com/installation/mac/
+    1. Use the Boot2Docker command-line utility
+    2. If you do command-line setup use: `boot2docker init eval “$(boot2docker shellinit)”`
+2. Get your Docker IP address with `boot2docker ip`
+3. Add a line to your /etc/hosts that goes `<Docker IP> dockerhost` 
+4. Run `boot2docker shellinit` and copy the export statements to your ~/.bash_profile 
+
+Any issues? Please let us know on our forums at: http://bit.ly/1MY1kul
+
+GO SETUP
+
+1. Download Go from http://golang.org/dl/ 
+
+NODE.JS SETUP 
+
+1. Install homebrew from http://brew.sh 
+2. `brew install node`
+
+COMPASS SETUP 
+
+1. Make sure you have the latest version of Ruby 
+2. `gem install compass`
+
+MATTERMOST SETUP 
+
+1. Make a project directory for Mattermost, which we'll call **$PROJECT** for the rest of these instructions
+2. Make a `go` directory in your $PROJECT directory 
+3. Open or create your ~/.bash_profile and add the following lines:  
+    `export GOPATH=$PROJECT/go`  
+    `export PATH=$PATH:$GOPATH/bin`  
+    then refresh your bash profile with `source ~/.bash_profile`
+4. Then use `cd $GOPATH` and `mkdir -p src/github.com/mattermost` then cd into this directory and run `git clone github.com/mattermost/platform.git` 
+5. If you do not have Mercurial, download it with: `brew install mercurial`
+6. Then do `cd platform` and `make test`. Provided the test runs fine, you now have a complete build environment. 
+7. Use `make run` to run your code
+
+Any issues? Please let us know on our forums at: http://bit.ly/1MY1kul
--- a/utils/config.go
+++ b/utils/config.go
@@ -221,6 +221,10 @@ func LoadConfig(fileName string) {
 	// Grabs the domain from enviroment variable if not in configuration
 	if config.ServiceSettings.Domain == "" {
 		config.ServiceSettings.Domain = os.Getenv("MATTERMOST_DOMAIN")
+		// If the enviroment variable is not set, use a default
+		if config.ServiceSettings.Domain == "" {
+			config.ServiceSettings.Domain = "localhost"
+		}
 	}

 	// Check for a valid email for feedback, if not then do feedback@domain
--- a/web/react/components/create_post.jsx
+++ b/web/react/components/create_post.jsx
@@ -31,9 +31,7 @@ module.exports = React.createClass({

        post.message = this.state.messageText;

-        var repRegex = new RegExp("<br>", "g");
-        if (post.message.replace(repRegex, " ").trim().length === 0
-                && this.state.previews.length === 0) {
+        if (post.message.trim().length === 0 && this.state.previews.length === 0) {
            return;
        }

--- a/web/react/utils/utils.jsx
+++ b/web/react/utils/utils.jsx
@@ -366,9 +366,6 @@ module.exports.textToJsx = function(text, options) {
    if (options && options['singleline']) {
        var repRegex = new RegExp("\n", "g");
        text = text.replace(repRegex, " ");
-    } else {
-        var repRegex = new RegExp("\n", "g");
-        text = text.replace(repRegex, "<br>");
    }

    var searchTerm = ""
@@ -392,7 +389,7 @@ module.exports.textToJsx = function(text, options) {
        implicitKeywords[keywordArray[i]] = true;
    }

-    var lines = text.split("<br>");
+    var lines = text.split("\n");
    var urlMatcher = new LinkifyIt();
    for (var i = 0; i < lines.length; i++) {
        var line = lines[i];