feat(installer): build worker source over SSH

Makefile

@@ -39,12 +39,15 @@ test:
 		./checks/llmhttp
 
 # test-ssh runs the Docker/OpenSSH source-install harness tests against
-# real Alpine, Ubuntu, and Arch fixtures. Requires a working Docker
+# real Alpine, Ubuntu, and Arch fixtures, including the full work
-# daemon; the fixtures pull/start containers, so this is opt-in and is
+# package-3 source install (Go toolchain download, clone, and build) on
-# never part of the default `make test` run.
+# each. Requires a working Docker daemon; the fixtures pull/start
+# containers and build inside them, so this is opt-in and is never part
+# of the default `make test` run. The 60m timeout covers three real
+# toolchain downloads and worker builds plus the harness lifecycle tests.
 test-ssh:
 	RSMON_ENV=test CWD=$(CURDIR) RSMON_TEST_DOCKER=1 go test \
-		-v -timeout 30m -count=1 ./internal/installer/harness
+		-v -timeout 60m -count=1 ./internal/installer/harness
 
 check:
 	go mod tidy

README.md

@@ -168,21 +168,52 @@ are rejected before connecting to the remote host.
 
 The default SSH port is 22 and the default RSMon URL is `https://rsmon.ru`.
 Encrypted keys use `--key-passphrase-file`; password authentication uses
-`--password-file`; password-protected sudo uses `--sudo-password-file`. Direct
+`--password-file`; password-protected sudo uses `--sudo-password-file`. Strongly
-secret flags are supported for interactive convenience but file options are
+prefer the file options for automation: a secret supplied through a direct flag
-safer for automation.
+is visible in the process list and shell history, while a file option never
+exposes it through argv. The direct flags remain available for interactive
+convenience.
 
 SSH host keys are checked against `~/.ssh/known_hosts` by default. Use
 `--known-hosts PATH` or pin `--host-key-fingerprint SHA256:...`. The explicit
 `--insecure-host-key` option disables host authentication and should only be
 used in a trusted disposable environment.
 
-A Go SSH source installer (remote package/toolchain/source build) is planned;
+A Go SSH source installer is implemented as the `source-install` subcommand: it
-the pure detection/planning layer and the Docker/OpenSSH test harness that will
+detects the remote distro and architecture over the existing SSH transport,
-accept it are implemented. See
+installs the minimal build prerequisites, downloads and SHA-256-verifies the
+pinned Go 1.26 toolchain, clones/updates the public repository, records the
+resolved branch and commit, and builds the worker to a staging path. It
+deliberately stops before touching the running service or its configuration
+(atomic activation and rollback are the next milestone). The pure
+detection/planning layer and the Docker/OpenSSH test harness that accepts it
+are implemented; see
 [`docs/source-installation.md`](docs/source-installation.md); run the live
 fixture matrix with `make test-ssh`.
 
+```bash
+./bin/rsmon-worker source-install \
+  --host worker.example.com \
+  --user deploy \
+  --identity-file ~/.ssh/id_ed25519
+```
+
+By default the installer builds the remote's default branch and records what it
+resolves to (the public repository currently publishes `master`). Pass
+`--branch <name>` to pin an explicit branch; it must exist on the remote or the
+install fails before building. The repository must be an `https://` URL without
+userinfo.
+
+The built binary is left at `/opt/rsmon-worker-src/rsmon-worker` (override with
+`--build-dir` / `--stage-binary`), the toolchain at `/usr/local/go` (replaced
+atomically: download, verify, stage, swap with rollback), and the resolved
+branch and commit in `/opt/rsmon-worker-src/rsmon-worker.commit` (written only
+after a successful build). The same SSH auth, secret-file, and host-key options
+as `deploy` apply; no worker token is sent because the source install does not
+configure a service. Prefer `--key-passphrase-file`, `--password-file`, and
+`--sudo-password-file` over their direct-flag equivalents: file options keep
+secrets out of the process list and shell history.
+
 ## Configuration
 
 | Variable | Required | Default | Purpose |

cmd/rsmon-worker/main_test.go

@@ -18,6 +18,15 @@ func TestDispatchManagementCommand(t *testing.T) {
 	if handled, code := dispatchManagementCommand([]string{"install", "--help"}); !handled || code != 0 {
 		t.Fatalf("install help = handled %t code %d", handled, code)
 	}
+	if handled, code := dispatchManagementCommand([]string{"deploy", "--help"}); !handled || code != 0 {
+		t.Fatalf("deploy help = handled %t code %d", handled, code)
+	}
+	if handled, code := dispatchManagementCommand([]string{"source-install", "--help"}); !handled || code != 0 {
+		t.Fatalf("source-install help = handled %t code %d", handled, code)
+	}
+	if handled, code := dispatchManagementCommand([]string{"source-install", "--identity-file", t.TempDir() + "/missing"}); !handled || code == 0 {
+		t.Fatalf("source-install without host/user = handled %t code %d", handled, code)
+	}
 }
 
 func TestSecretValue(t *testing.T) {

cmd/rsmon-worker/management.go

@@ -19,6 +19,8 @@ func dispatchManagementCommand(args []string) (bool, int) {
 		return true, installCommand(args[1:])
 	case "deploy":
 		return true, deployCommand(args[1:])
+	case "source-install":
+		return true, sourceInstallCommand(args[1:])
 	default:
 		return false, 0
 	}
@@ -153,3 +155,78 @@ func secretValue(direct, path string) (string, error) {
 	}
 	return strings.TrimRight(string(b), "\r\n"), nil
 }
+
+// sourceInstallCommand drives the remote source installer (work package
+// 3 of docs/source-installation.md): prerequisites, verified Go
+// toolchain, clone/update, resolved branch/commit record, and a staging
+// build. It reuses the deploy SSH options; it never touches the running
+// service, configuration, or data directory on the remote host.
+func sourceInstallCommand(args []string) int {
+	fs := flag.NewFlagSet("source-install", flag.ContinueOnError)
+	fs.SetOutput(os.Stderr)
+	var opts installer.SourceInstallOptions
+	var passphraseFile, passwordFile, sudoPasswordFile string
+	fs.StringVar(&opts.Host, "host", "", "SSH server hostname or address")
+	fs.IntVar(&opts.Port, "port", 22, "SSH server port")
+	fs.StringVar(&opts.User, "user", "", "SSH username")
+	fs.StringVar(&opts.IdentityFile, "identity-file", "", "SSH private key path")
+	fs.StringVar(&opts.KeyPassphrase, "key-passphrase", "", "SSH private key passphrase")
+	fs.StringVar(&passphraseFile, "key-passphrase-file", "", "file containing the private key passphrase")
+	fs.StringVar(&opts.Password, "password", "", "SSH login password")
+	fs.StringVar(&passwordFile, "password-file", "", "file containing the SSH login password")
+	fs.StringVar(&opts.SudoPassword, "sudo-password", "", "remote sudo password")
+	fs.StringVar(&sudoPasswordFile, "sudo-password-file", "", "file containing the remote sudo password")
+	fs.StringVar(&opts.KnownHostsFile, "known-hosts", "", "known_hosts path (default: ~/.ssh/known_hosts)")
+	fs.StringVar(&opts.HostKeyFingerprint, "host-key-fingerprint", "", "expected SHA256 SSH host-key fingerprint")
+	fs.BoolVar(&opts.InsecureHostKey, "insecure-host-key", false, "disable SSH host-key verification (unsafe)")
+	fs.StringVar(&opts.Repo, "repo", "", "worker repository to clone/update (default: public rocketgit.ru repo)")
+	fs.StringVar(&opts.Branch, "branch", "", "branch to build; empty resolves the remote default branch")
+	fs.StringVar(&opts.GoVersion, "go-version", "", "Go toolchain version (default: pinned 1.26.0)")
+	fs.StringVar(&opts.GoArch, "go-arch", "", "Go download archive suffix; empty derives it from the remote architecture")
+	fs.StringVar(&opts.BuildDir, "build-dir", "", "remote clone/build directory (default /opt/rsmon-worker-src)")
+	fs.StringVar(&opts.GoModuleProxy, "go-proxy", "", "GOPROXY for the remote build (default: Go default)")
+	fs.StringVar(&opts.ToolchainDir, "toolchain-dir", "", "remote Go install path ending in /go (default /usr/local/go)")
+	fs.StringVar(&opts.StageBinary, "stage-binary", "", "staging binary path (default <build-dir>/rsmon-worker)")
+	fs.DurationVar(&opts.SessionTimeout, "session-timeout", 0, "per-remote-command timeout (default 30m; 0 uses the default)")
+	fs.Usage = func() {
+		fmt.Fprintln(fs.Output(), "Usage: rsmon-worker source-install --host HOST --user USER [SSH options] [source options]")
+		fs.PrintDefaults()
+	}
+	if err := fs.Parse(args); err != nil {
+		if errors.Is(err, flag.ErrHelp) {
+			return 0
+		}
+		return 2
+	}
+	if fs.NArg() != 0 {
+		fs.Usage()
+		return 2
+	}
+	var err error
+	if opts.KeyPassphrase, err = secretValue(opts.KeyPassphrase, passphraseFile); err != nil {
+		fmt.Fprintf(os.Stderr, "source-install failed: %v\n", err)
+		return 1
+	}
+	if opts.Password, err = secretValue(opts.Password, passwordFile); err != nil {
+		fmt.Fprintf(os.Stderr, "source-install failed: %v\n", err)
+		return 1
+	}
+	if opts.SudoPassword, err = secretValue(opts.SudoPassword, sudoPasswordFile); err != nil {
+		fmt.Fprintf(os.Stderr, "source-install failed: %v\n", err)
+		return 1
+	}
+	res, err := installer.SourceInstall(opts)
+	if err != nil {
+		fmt.Fprintf(os.Stderr, "source-install failed: %v\n", err)
+		return 1
+	}
+	fmt.Printf("source install complete\n")
+	fmt.Printf("  distro:       %s\n", res.Detection.Summarize())
+	fmt.Printf("  toolchain:    %s (%s) at %s\n", res.Plan.Toolchain.Version, res.GoArch, res.ToolchainDir)
+	fmt.Printf("  branch:       %s\n", res.ResolvedBranch)
+	fmt.Printf("  commit:       %s\n", res.ResolvedCommit)
+	fmt.Printf("  record file:  %s\n", res.RecordFile)
+	fmt.Printf("  staged build: %s\n", res.StageBinary)
+	fmt.Println("  status: not installed as a service (activation is the next milestone)")
+	return 0
+}

docs/changelog.md

@@ -2,6 +2,88 @@
 
 ## 2026-08-12
 
+### Source-install hardening review
+
+- Fail-closed remote scripts: checkout, branch resolution, and build steps now
+  run under `set -eu` (and package/record steps chain with `&&`), so a failed
+  checkout or fetch can never be masked by a stale `rev-parse` or subsequent
+  command. The checkout step additionally refuses (`git diff --quiet` /
+  `--cached --quiet`) before the destructive `checkout -B`, because `-B`
+  silently discards local changes and would otherwise never fail on a dirty
+  tree. A dirty-tree checkout failure surfaces as a `check out branch` error
+  before the build runs; the new `TestSourceInstallSSHCheckoutFailureNotMasked`
+  unit test and `TestSourceInstallDirtyCheckoutPreservesStaging` Docker test
+  prove the previous staging binary and commit record are preserved
+  byte-for-byte.
+- Atomic toolchain replacement: the Go toolchain is downloaded, SHA-256
+  verified, extracted into a same-filesystem staging dir, verified to report
+  the target version, and only then swapped into `ToolchainDir` with the prior
+  toolchain moved to a sibling `.go-backup` that is restored on swap failure.
+  A failed download/verify/extract/swap never destroys the prior Go.
+- Record-after-build pairing: `rsmon-worker.commit` is written only after a
+  successful build, so the record and the staged binary always correspond to
+  the same commit. The build verifies `<stage>.new --version` before an atomic
+  `mv -f` over the previous staging binary; `GOMODCACHE` is now set alongside
+  `GOCACHE` inside the build dir so reruns reuse both caches.
+- Origin verification: an existing checkout's `remote.origin.url` must exactly
+  match the configured repository before anything is fetched or built.
+- Repository hardening: only `https://` clone URLs without userinfo are
+  accepted (`ValidateRepoURL`, enforced before dialing and again when
+  planning).
+- Explicit charset validation for Go version and architecture overrides
+  (`sshinstall.ValidGoVersion` / `ValidGoArch`) before any remote mutation.
+- Bounded remote execution: each remote command is capped by
+  `--session-timeout` (default 30m) and captured stdout is size-bounded
+  alongside the existing stderr bound; deploy's streaming `runRemote` keeps its
+  historical no-timeout behavior.
+- The source installer now defaults to the remote's default branch (the public
+  repo publishes `master`) instead of the plan's stale `main` default, while
+  `--branch` still pins an explicit branch that must exist remotely. The
+  README quickstart no longer shows the incorrect `--branch main`.
+- CLI secret flags keep their compatibility, but docs now explicitly state that
+  file options (`-password-file`, etc.) keep secrets out of argv and shell
+  history while direct flags expose them through the process list.
+- The harness accepts `RSMON_TEST_DOCKER_DNS` (comma-separated) to pin
+  `docker run --dns` for fixture containers, so internet-facing installs are
+  not at the mercy of a flaky local resolver.
+
+### Remote source-install execution (work package 3)
+
+- Added `installer.SourceInstall` (`internal/installer/sourceinstall.go`):
+  executes the source-install flow through the existing SSH transport,
+  reusing the `deploy` command's `SSHOptions` (keys, passphrases,
+  passwords, sudo passwords, known-hosts, pinned fingerprints) and its
+  privilege path. Extracted the shared `SSHOptions` struct and a
+  `sudoWrap` helper so deploy and source install cannot diverge.
+- Steps implemented: minimal package-prerequisite install per distro
+  (`apk`/`apt`/`pacman`/`dnf`, never a compiler), SHA-256-verified Go 1.26
+  toolchain download/extraction with an idempotent version-skip and temp-dir
+  cleanup, clone-or-update of the public repository (with a bounded 3-attempt
+  retry for transient DNS/TLS/proxy failures), resolution of the remote
+  default branch (a pinned branch must exist remotely), a resolved branch and
+  commit record at `<BuildDir>/rsmon-worker.commit`, and a staging build
+  (`CGO_ENABLED=0`, `-trimpath`, repository `-ldflags`) verified via
+  `--version`. The running service, config, and data directory are untouched
+  (work package 4 boundary).
+- Security: every interpolated remote value is single-quoted; branch and
+  commit values are strictly validated; no worker token or control-plane
+  credential is sent; sudo passwords travel only over session stdin; remote
+  errors are bounded (stderr truncated in `runRemoteOutput`).
+- Added unit tests for the remote scripts, option validation, branch/commit
+  parsing, sudo wrapping, the secrets-absent contract, and an in-process
+  real-SSH orchestration flow (with missing-pinned-branch, build-failure, and
+  detection-failure paths).
+- Added `TestSourceInstallFixtures` to the Docker/OpenSSH harness: each of
+  Alpine, Ubuntu, and Arch installs from a clean state through the real
+  harness transport (prerequisite install, verified Go 1.26, clone, resolved
+  commit, staging build), then a rerun proves idempotency (same branch,
+  toolchain reuse, no temp leaks). All three resolved the public repo's
+  `master` at `4651deb2...` in the recorded run. `make test-ssh` timeout
+  raised to 60m.
+- Documented the branch-resolution reality: the public repository currently
+  publishes `master`, and the installer records whatever the remote default
+  branch resolves to.
+
 ### Source-install harness and planning foundations (work packages 1-2)
 
 - Added `internal/installer/harness`: a reusable Docker/OpenSSH test harness

docs/implementation-roadmap.md

@@ -15,8 +15,8 @@ Worker repository:
   metadata;
 - add a package/install smoke test for Docker and systemd artifacts;
 - add the Docker/OpenSSH source-install matrix for Alpine, Ubuntu, and Arch from
-  [source-installation.md](source-installation.md), using Go 1.26 and branch
+  [source-installation.md](source-installation.md), using Go 1.26 and the
-  `main`;
+  remote default branch;
 - document immutable SHA and release tags as production defaults.
 
 Source-install foundations landed:
@@ -26,9 +26,16 @@ Source-install foundations landed:
       reliable teardown, gated behind `RSMON_TEST_DOCKER` (`make test-ssh`);
 - [x] pure distro/toolchain/source-install planning (`internal/sshinstall`):
       os-release detection, package-manager/init resolution, pinned Go 1.26
-      toolchain with published SHA-256, and a plan the executor will run;
+      toolchain with published SHA-256, and a plan the executor runs;
-- [ ] remote package install, Go download, clone, and build execution through
+- [x] remote package install, Go download, clone, and build execution through
-      the SSH transport (source-install work package 3);
+      the SSH transport (`installer.SourceInstall`): prerequisite install,
+      SHA-256-verified Go toolchain, clone/update of the public repo, resolved
+      branch/commit record, and a staging build. Running service/config is not
+      touched (source-install work package 3);
+- [ ] atomic service activation, rollback, and failure-preservation tests over
+      SSH (source-install work package 4);
+- [ ] run the full source-install E2E matrix in CI (source-install work
+      package 5).
 
 Gate: a push publishes `sha-<12>` and `latest` manifests for both platforms,
 and a container remains healthy when the control plane is unavailable.

docs/install.md

@@ -5,8 +5,12 @@ Docker image) into a running, enabled systemd service on a Linux host. It is
 the supported way to deploy the worker: it writes the configuration, the
 systemd unit, and the data directory, then starts the service.
 
-> A Go SSH source installer is planned in
+> A Go SSH source installer (`rsmon-worker source-install`) builds the worker
-> [source-installation.md](source-installation.md). Today
+> from source on a remote host over SSH - prerequisites, verified Go toolchain,
+> clone/update of the public repository (resolved to the remote default branch
+> unless pinned), resolved branch/commit record, and a staging build - without
+> yet installing a service. See
+> [source-installation.md](source-installation.md). Today the local
 > `install` copies the binary you invoke it from (or pulls the `--image`
 > digest), so build first with `make build` and run the resulting
 > `./bin/rsmon-worker`.

docs/source-installation.md

@@ -3,8 +3,9 @@
 ## Status
 
 In progress. Work package 1 (reusable Docker/OpenSSH harness and distro
-fixtures) and the pure detection/planning foundation (work package 2
+fixtures), the pure detection/planning foundation (work package 2 core),
-core) are implemented:
+and work package 3 (remote execution through the existing SSH transport)
+are implemented:
 
 - `internal/installer/harness` builds and runs real OpenSSH containers
   for Alpine, Ubuntu, and Arch, waits for real network readiness, captures
@@ -17,13 +18,23 @@ core) are implemented:
   and init system from `/etc/os-release`, plans the pinned Go 1.26
   toolchain (published SHA-256) for the remote architecture, and produces
   a pure source-install plan. It executes nothing.
+- `installer.SourceInstall` (work package 3) executes the plan through
+  the same SSH transport, authentication, and host-key verification the
+  `deploy` command uses. It installs the minimal package prerequisites,
+  downloads and SHA-256-verifies the pinned Go toolchain before
+  extraction, clones/updates the public repository, checks out the
+  resolved branch, records the resolved branch and commit, and builds the
+  worker to a staging path. It deliberately does not install or replace
+  the running service, configuration, or data directory: atomic
+  activation and rollback are the next work package.
 
 The current Go installer can still only upload a binary or deploy an
-immutable Docker image over SSH. Remote package/toolchain/source build
+immutable Docker image over SSH. Source installs now build remotely to a
-execution (work packages 3 and 4) is not implemented yet; the acceptance
+staging path, but service activation over SSH (work package 4) is not
-test currently stops after detection, clean-state, and planning
+implemented yet; the acceptance test stops after install-to-staging and
-assertions. Existing tests are unit tests; the harness tests run against
+idempotent-rerun assertions. Existing tests are unit tests plus the
-live OpenSSH containers when explicitly enabled.
+harness tests that run against live OpenSSH containers when explicitly
+enabled.
 
 ## Initial Platform Scope
 
@@ -49,7 +60,8 @@ It then:
 3. downloads the pinned Go 1.26 toolchain for the detected architecture and
    verifies the published SHA-256;
 4. clones `https://rocketgit.ru/rsmon/worker.git` or updates an existing clone;
-5. checks out branch `main` and records the resolved commit;
+5. checks out the resolved branch (the pinned branch when one is configured,
+   otherwise the remote's default branch) and records the resolved commit;
 6. builds a reproducible worker binary with the repository build flags;
 7. atomically installs the binary, validated environment, data directory, and
    service definition;
@@ -59,6 +71,100 @@ Repository, branch, Go version, checksum source, build directory, and Go module
 proxy may be configurable, but production output records their resolved values.
 The default repository is publicly readable and requires no source credential.
 
+## Work Package 3: Remote Execution To A Staging Path
+
+Work package 3 is `installer.SourceInstall` in
+`internal/installer/sourceinstall.go`. It reuses the `deploy` command's
+`SSHOptions` (authentication, sudo password, known-hosts and fingerprint
+verification) and runs every remote step with the same privilege path
+(root, passwordless sudo, or `sudo -S -p ''` with the password delivered
+only over stdin). Steps 1-6 of the flow above are implemented; step 7
+(atomic install) is deliberately the next work package.
+
+Per step:
+
+- **Prerequisite install.** `packageScript` renders the distro's
+  idempotent command (`apk add --no-cache`, `apt-get update` +
+  `apt-get install -y --no-install-recommends`, `pacman -Sy --noconfirm
+  --needed`, `dnf install -y`) for the minimal plan packages (`git`,
+  `ca-certificates`, `curl`, `tar`, `gzip`). No compiler is ever planned
+  or installed.
+- **Toolchain.** `toolchainScript` downloads the pinned Go tarball into a
+  `mktemp` temp dir, verifies it with `sha256sum -c -` *before*
+  extraction, extracts into a staging dir on the same filesystem as
+  `ToolchainDir` (which must end in `/go`, default `/usr/local/go`),
+  verifies the staged toolchain reports the target version, and only then
+  swaps it into place. The prior toolchain is moved to a sibling
+  `.go-backup` and is restored if the swap fails, so a failed
+  download/verify/extract/swap always leaves the prior Go untouched. A
+  present toolchain that already reports the target version is reused, so
+  reruns do not re-download. Temp, staging, and backup directories are
+  removed on success and failure.
+- **Clone/update.** `cloneUpdateScript` clones the repository when
+  `BuildDir` has no `.git` and otherwise fetches with `--prune`, so a
+  rerun updates in place. An existing checkout's `remote.origin.url` must
+  exactly match the configured repository before anything is fetched or
+  built, so the installer can never fetch or build an unconfigured
+  repository. The clone/fetch retries up to three times (2s apart)
+  because real repositories can be transiently unreachable (DNS, TLS, or
+  proxy hiccups); three bounded attempts keep a momentary outage from
+  failing a full source install.
+- **Resolved branch.** The installer resolves the remote default branch
+  via `git remote set-head origin --auto` +
+  `git symbolic-ref --short refs/remotes/origin/HEAD`. When no branch is
+  pinned it builds the remote default (the public repo currently
+  publishes `master`); a pinned branch must exist remotely or the install
+  fails before the build. The resolved branch and the `git rev-parse
+  HEAD` commit (validated as 40 lowercase hex) are returned by
+  `SourceInstall`.
+- **Staging build.** `buildScript` builds with `CGO_ENABLED=0`,
+  `-trimpath`, the repository's own `-ldflags` shape (version `dev`,
+  resolved commit short form, UTC build date), and both `GOCACHE` and
+  `GOMODCACHE` inside the build dir (so reruns reuse them), plus an
+  optional `GOPROXY`. The binary is built to a sibling `<stage>.new`,
+  verified with `<stage>.new --version`, and only then atomically swapped
+  over `<BuildDir>/rsmon-worker` (or `StageBinary`), so a failed build
+  never replaces the previous staging binary. It is not written to
+  `/usr/local/bin`.
+- **Commit record.** The `rsmon-worker.commit` record (a
+  `branch=...` / `commit=...` format in the build dir) is written only
+  *after* a successful build, so the record and the staged binary always
+  correspond to the same commit.
+
+Security properties of work package 3:
+
+- Every interpolated value (repository, branch, build dir, URLs, SHA-256,
+  package names, paths) is single-quoted; repository, branch, commit, Go
+  version, and Go architecture values are additionally validated with
+  strict patterns. No worker token or control-plane credential is ever
+  sent: the install stages a binary and touches no service configuration.
+- The repository must be an `https://` URL without userinfo, so source
+  credentials cannot reach the remote clone command or the clone's
+  config.
+- Sudo passwords are delivered over the session's stdin only, never in a
+  command string (the same `sudoWrap` path the `deploy` command uses).
+  Direct `--password`/`--sudo-password`/`--key-passphrase` flags remain
+  available but expose the value through the process list and shell
+  history; the CLI docs strongly prefer the `-file` variants. The source
+  installer sends no worker token at all.
+- Every step script fails closed: `set -eu` (or an explicit retry that
+  exits non-zero) is used, so a failed checkout or fetch can never be
+  masked by a stale subsequent command. The checkout step refuses before
+  the destructive `checkout -B` when the tracked working tree is dirty
+  (`git diff --quiet` / `--cached --quiet`), because `checkout -B` would
+  silently discard local changes; a dirty-tree rerun fails at checkout and
+  leaves the previous staging binary and commit record untouched.
+- Remote errors are bounded: each step returns a step-labelled error,
+  stderr and captured stdout are size-bounded in `runRemoteOutput`, and
+  each remote command is capped by `--session-timeout` (default 30m).
+- Toolchain temp, staging, and backup directories are removed on success
+  and failure, and the acceptance test asserts no `/tmp/rsmon-toolchain-*`
+  or `/usr/local/.go-staging-*`/`.go-backup` leaks after the rerun.
+- Failed builds and failed checkouts leave the previous staging binary
+  untouched (the binary is only overwritten by an atomically-swapped
+  successful build, and a checkout failure aborts before the build);
+  there is no running service or configuration to preserve yet.
+
 ## Docker OpenSSH Test Harness
 
 Adapt the real-network pattern from `/data/_swap/sshkeymanager`: start an
@@ -93,6 +199,11 @@ harness proves is that a known_hosts entry carrying a *different* key is
 rejected before any command runs (the `TestHarnessHostKeyMismatch` test),
 not that a fingerprint is pinned.
 
+The fixtures install over the public internet, so environments with flaky
+local resolvers can pin a reliable upstream via the comma-separated
+`RSMON_TEST_DOCKER_DNS` variable (applied as `docker run --dns ...`); it
+is empty by default, keeping Docker's embedded DNS.
+
 Teardown (`docker rm -f` + `docker network rm` + per-instance
 `docker image rm` + temp-dir removal) is idempotent, runs on every
 `Start` error path, and is verified by a dedicated test. Each harness
@@ -158,15 +269,26 @@ RSMON_TEST_DOCKER=1 go test -v -count=1 -timeout 30m ./internal/installer/harnes
 
 ## Idempotency And Security
 
-- A second run updates/fetches safely and leaves one active service.
+- A second run updates/fetches safely: the toolchain is reused when the version
+  matches, the clone's origin is verified against the configured repository and
+  then fetched in place, the resolved branch/commit record is rewritten after
+  the new build succeeds, and the staging build atomically swaps over the
+  previous staging binary. The "one active service" guarantee is a work package
+  4 property (activation); work package 3 leaves no running service to
+  duplicate and no leaked toolchain temp files.
 - Wrong host fingerprints fail before remote mutation. The harness's fresh
   known_hosts file is trust-on-first-use; its dedicated mismatch test dials
   against a known_hosts entry carrying a different server key and proves the
   dial fails before any command runs.
-- Tokens/passwords come from files or stdin-safe channels and never appear in
+- Tokens/passwords should come from files: `--key-passphrase-file`,
-  command arguments, logs, source checkout, or shell history.
+  `--password-file`, and `--sudo-password-file` keep secrets out of argv and
+  shell history, while the equivalent direct flags expose them through the
+  process list. The source install itself sends no worker token or
+  control-plane credential at all, and sudo passwords travel only over the
+  session's stdin.
 - Remote temporary files are removed on success and failure.
-- Failed builds do not replace a working binary or service definition.
+- Failed builds, failed checkouts, and failed toolchain swaps do not replace a
+  working binary or service definition.
 - Package-manager and download failures return bounded actionable errors.
 - The installer verifies Go tarball checksum before extraction.
 
@@ -175,7 +297,9 @@ RSMON_TEST_DOCKER=1 go test -v -count=1 -timeout 30m ./internal/installer/harnes
 - [x] 1. Add reusable Docker/OpenSSH harness and distro fixtures.
 - [x] 2. Add pure distro/toolchain/source-install script planning and unit tests
       (detection + planning foundation; remote execution is work package 3).
-- [ ] 3. Execute source installation through the existing SSH transport.
+- [x] 3. Execute source installation through the existing SSH transport
+      (prerequisites, verified Go toolchain, clone/update, resolved branch and
+      commit record, and a build to a staging path; no service activation).
 - [ ] 4. Add atomic build/install, idempotency, and failure rollback.
 - [ ] 5. Add Alpine, Ubuntu, and Arch network E2E tests to CI.
 - [ ] 6. Add CentOS-family support.
@@ -184,13 +308,16 @@ RSMON_TEST_DOCKER=1 go test -v -count=1 -timeout 30m ./internal/installer/harnes
 ## Acceptance Gates
 
 - [ ] All three initial Linux images install from a clean state through OpenSSH.
+      Work package 3 covers the install-to-staging half (package install,
+      verified Go 1.26, clone/update, resolved commit, staging build); the
+      service-start half is the work package 4 gate.
 - [ ] The built worker reports the expected version/commit and serves `/healthz`.
 - [ ] Re-running the installer succeeds without duplicate services or leaked files.
 - [ ] Host-key, checksum, clone, build, and service-start failure tests preserve the
       previous installation.
 - [ ] CI uses approved registry mirrors and cleans every test container/network.
 
-## Verified Test Evidence (work packages 1 and 2)
+## Verified Test Evidence (work packages 1-3)
 
 Recorded 2026-08-12 from `make test-ssh` (Docker Engine 29.7.1):
 
@@ -202,3 +329,19 @@ Recorded 2026-08-12 from `make test-ssh` (Docker Engine 29.7.1):
 - Host-key mismatch, host-key stability, failed-start cleanup, and complete
   teardown (container, network, fixture image tag, and temp dir gone) tests
   pass; no test container, network, or image tag is left behind.
+- `TestSourceInstallFixtures` runs the full work-package-3 flow on each
+  fixture from a clean state over the harness's real OpenSSH transport:
+  prerequisite install, verified Go 1.26 toolchain download/extraction, clone
+  of the public repository, resolution of its default branch, resolved-commit
+  record file, and a staging build that reports the resolved commit via
+  `--version`. The public repo's `HEAD` was `master` at `4651deb2...` during
+  the run, and all three fixtures resolved to that branch and commit (the
+  installer records whatever the remote publishes). A rerun succeeds, keeps
+  the same branch, reuses the toolchain, and leaves no
+  `/tmp/rsmon-toolchain-*` temp dirs. The running service and its
+  configuration are not touched (work package 4 boundary).
+- The unit suite covers the per-step remote scripts, option validation,
+  branch/commit parsing, sudo wrapping (password never in the command), the
+  secrets-absent contract, and an in-process real-SSH orchestration flow with
+  failure paths for missing pinned branches, build failures, and detection
+  failures.

internal/installer/deploy.go

@@ -18,7 +18,14 @@ import (
 	"golang.org/x/crypto/ssh/knownhosts"
 )
 
-type DeployOptions struct {
+// SSHOptions is the SSH connection and authentication surface shared by
+// the deploy command and the source installer. Secrets (passwords,
+// passphrases, sudo passwords) can be supplied through direct flags or
+// file options. The CLI layer should strongly prefer file options: when
+// read from a file they never appear in command arguments, logs, or
+// shell history, while direct flags expose the value through the process
+// list and shell history.
+type SSHOptions struct {
 	Host               string
 	Port               int
 	User               string
@@ -29,6 +36,10 @@ type DeployOptions struct {
 	KnownHostsFile     string
 	HostKeyFingerprint string
 	InsecureHostKey    bool
+}
+
+type DeployOptions struct {
+	SSHOptions
 	Binary  string
 	Token   string
 	URL     string
@@ -71,11 +82,11 @@ func Deploy(opts DeployOptions) error {
 			return err
 		}
 	}
-	auth, err := sshAuth(opts)
+	auth, err := sshAuth(opts.SSHOptions)
 	if err != nil {
 		return err
 	}
-	hostKey, err := hostKeyCallback(opts)
+	hostKey, err := hostKeyCallback(opts.SSHOptions)
 	if err != nil {
 		return err
 	}
@@ -111,16 +122,7 @@ func Deploy(opts DeployOptions) error {
 	if opts.NoStart {
 		args += " --no-start"
 	}
-	var command string
+	command, stdin := sudoWrap(opts.User, opts.SudoPassword, args)
-	var stdin []byte
-	if opts.User == "root" {
-		command = args
-	} else if opts.SudoPassword != "" {
-		command = "sudo -S -p '' -- " + args
-		stdin = []byte(opts.SudoPassword + "\n")
-	} else {
-		command = "sudo -n -- " + args
-	}
 	if err := runRemote(client, command, stdin); err != nil {
 		return fmt.Errorf("remote install: %w", err)
 	}
@@ -137,23 +139,30 @@ func deployDocker(client *ssh.Client, opts DeployOptions, remoteEnv, remoteUnit
 	if !opts.NoStart {
 		script += " && systemctl restart rsmon-worker.service && systemctl is-active --quiet rsmon-worker.service"
 	}
-	command := "sh -c " + shellQuote(script)
+	command, stdin := sudoWrap(opts.User, opts.SudoPassword, "sh -c "+shellQuote(script))
-	var stdin []byte
-	if opts.User != "root" {
-		if opts.SudoPassword != "" {
-			command = "sudo -S -p '' -- " + command
-			stdin = []byte(opts.SudoPassword + "\n")
-		} else {
-			command = "sudo -n -- " + command
-		}
-	}
 	if err := runRemote(client, command, stdin); err != nil {
 		return fmt.Errorf("remote Docker install: %w", err)
 	}
 	return nil
 }
 
-func sshAuth(opts DeployOptions) ([]ssh.AuthMethod, error) {
+// sudoWrap prefixes a remote command with the privilege path required to
+// run it as root: the plain command for a root user, `sudo -n` when the
+// user has passwordless sudo, and `sudo -S` with an empty prompt when a
+// sudo password is configured. The sudo password is delivered only over
+// the session's stdin, never in the command string, so it cannot appear
+// in process listings, logs, or shell history.
+func sudoWrap(user, sudoPassword, command string) (string, []byte) {
+	if user == "root" {
+		return command, nil
+	}
+	if sudoPassword != "" {
+		return "sudo -S -p '' -- " + command, []byte(sudoPassword + "\n")
+	}
+	return "sudo -n -- " + command, nil
+}
+
+func sshAuth(opts SSHOptions) ([]ssh.AuthMethod, error) {
 	var methods []ssh.AuthMethod
 	if opts.IdentityFile != "" {
 		key, err := os.ReadFile(opts.IdentityFile)
@@ -180,7 +189,7 @@ func sshAuth(opts DeployOptions) ([]ssh.AuthMethod, error) {
 	return methods, nil
 }
 
-func hostKeyCallback(opts DeployOptions) (ssh.HostKeyCallback, error) {
+func hostKeyCallback(opts SSHOptions) (ssh.HostKeyCallback, error) {
 	if opts.HostKeyFingerprint != "" {
 		want := opts.HostKeyFingerprint
 		return func(_ string, _ net.Addr, key ssh.PublicKey) error {
@@ -242,6 +251,79 @@ func uploadReader(client *ssh.Client, src io.Reader, remotePath string, mode os.
 }
 
 func runRemote(client *ssh.Client, command string, stdin []byte) error {
+	// Deploy commands are short and stream to the terminal; they keep the
+	// historical behavior with no timeout.
+	return runRemoteWithTimeout(client, command, stdin, os.Stdout, os.Stderr, 0)
+}
+
+// maxRemoteError bounds the stderr snippet folded into runRemoteOutput
+// errors so a verbose remote failure cannot produce an unbounded error
+// string.
+const maxRemoteError = 4096
+
+// maxRemoteOutput bounds the stdout captured by runRemoteOutput so a
+// noisy remote command cannot exhaust memory.
+const maxRemoteOutput = 1 << 20 // 1 MiB
+
+// boundedBuffer is an io.Writer that silently discards everything past
+// max bytes and remembers whether truncation happened.
+type boundedBuffer struct {
+	buf       bytes.Buffer
+	max       int
+	truncated bool
+}
+
+func (b *boundedBuffer) Write(p []byte) (int, error) {
+	if len(p) == 0 {
+		return 0, nil
+	}
+	if b.buf.Len() >= b.max {
+		b.truncated = true
+		return len(p), nil
+	}
+	remaining := b.max - b.buf.Len()
+	if len(p) > remaining {
+		b.buf.Write(p[:remaining])
+		b.truncated = true
+		return len(p), nil
+	}
+	return b.buf.Write(p)
+}
+
+func (b *boundedBuffer) Bytes() []byte { return b.buf.Bytes() }
+
+func (b *boundedBuffer) String() string { return b.buf.String() }
+
+// runRemoteOutput executes a remote command and returns its captured,
+// size-bounded stdout. Stderr is folded into the returned error on
+// failure (bounded to maxRemoteError bytes) so operators see what went
+// wrong without a bounded failure dumping unbounded output. The command
+// is aborted if it outlives timeout (<= 0 disables the timeout).
+func runRemoteOutput(client *ssh.Client, command string, stdin []byte, timeout time.Duration) ([]byte, error) {
+	var stdout, stderr boundedBuffer
+	stdout.max = maxRemoteOutput
+	stderr.max = maxRemoteError
+	if err := runRemoteWithTimeout(client, command, stdin, &stdout, &stderr, timeout); err != nil {
+		msg := strings.TrimSpace(stderr.String())
+		if msg != "" {
+			if stderr.truncated {
+				msg += "..."
+			}
+			return stdout.Bytes(), fmt.Errorf("%w: %s", err, msg)
+		}
+		return stdout.Bytes(), err
+	}
+	out := stdout.Bytes()
+	if stdout.truncated {
+		out = append(out, []byte("\n...[output truncated]")...)
+	}
+	return out, nil
+}
+
+// runRemoteWithTimeout runs a remote command, optionally aborting it
+// when it outlives timeout (<= 0 disables the timeout). The session is
+// closed and the blocked Run is unblocked when the timer fires.
+func runRemoteWithTimeout(client *ssh.Client, command string, stdin []byte, stdout, stderr io.Writer, timeout time.Duration) error {
 	session, err := client.NewSession()
 	if err != nil {
 		return err
@@ -250,10 +332,25 @@ func runRemote(client *ssh.Client, command string, stdin []byte) error {
 	if stdin != nil {
 		session.Stdin = bytes.NewReader(stdin)
 	}
-	session.Stdout = os.Stdout
+	session.Stdout = stdout
-	session.Stderr = os.Stderr
+	session.Stderr = stderr
+
+	if timeout <= 0 {
 		return session.Run(command)
 	}
+	done := make(chan error, 1)
+	go func() { done <- session.Run(command) }()
+	timer := time.NewTimer(timeout)
+	defer timer.Stop()
+	select {
+	case err := <-done:
+		return err
+	case <-timer.C:
+		_ = session.Close() // abort the remote command and free the session
+		<-done
+		return fmt.Errorf("remote command timed out after %s", timeout)
+	}
+}
 
 func shellQuote(value string) string {
 	return "'" + strings.ReplaceAll(value, "'", "'\\''") + "'"

internal/installer/deploy_test.go

@@ -19,14 +19,14 @@ func TestFingerprintHostKeyCallback(t *testing.T) {
 	if err != nil {
 		t.Fatal(err)
 	}
-	callback, err := hostKeyCallback(DeployOptions{HostKeyFingerprint: ssh.FingerprintSHA256(publicKey)})
+	callback, err := hostKeyCallback(SSHOptions{HostKeyFingerprint: ssh.FingerprintSHA256(publicKey)})
 	if err != nil {
 		t.Fatal(err)
 	}
 	if err := callback("host", &net.TCPAddr{}, publicKey); err != nil {
 		t.Fatalf("matching fingerprint rejected: %v", err)
 	}
-	callback, err = hostKeyCallback(DeployOptions{HostKeyFingerprint: "SHA256:wrong"})
+	callback, err = hostKeyCallback(SSHOptions{HostKeyFingerprint: "SHA256:wrong"})
 	if err != nil {
 		t.Fatal(err)
 	}
@@ -36,15 +36,17 @@ func TestFingerprintHostKeyCallback(t *testing.T) {
 }
 
 func TestKnownHostsMissingFile(t *testing.T) {
-	if _, err := hostKeyCallback(DeployOptions{KnownHostsFile: t.TempDir() + "/missing"}); err == nil {
+	if _, err := hostKeyCallback(SSHOptions{KnownHostsFile: t.TempDir() + "/missing"}); err == nil {
 		t.Fatal("missing known_hosts file accepted")
 	}
 }
 
 func TestDeployRejectsMutableDockerImageBeforeConnecting(t *testing.T) {
 	err := Deploy(DeployOptions{
+		SSHOptions: SSHOptions{
 			Host: "unreachable.example.test",
 			User: "deploy",
+		},
 		Token:  "token",
 		Docker: true,
 		Image:  "reg.rsxx.ru/rsmon/rsmon-worker:latest",

internal/installer/harness/harness.go

@@ -168,6 +168,14 @@ func (h *Harness) Addr() string {
 	return net.JoinHostPort("127.0.0.1", strconv.Itoa(h.port))
 }
 
+// Port returns the published host port of the container's SSH listener
+// (the host is always 127.0.0.1). 0 before Start.
+func (h *Harness) Port() int {
+	h.mu.Lock()
+	defer h.mu.Unlock()
+	return h.port
+}
+
 // Start builds the fixture image, starts the container, waits for real
 // SSH readiness, captures the server host key into a temp known_hosts
 // file, and records the published port. Every error path cleans up the
@@ -201,13 +209,10 @@ func (h *Harness) Start(ctx context.Context) error {
 	// docker run -d prints the container id directly, so no lookup is
 	// needed; the container name is the stable handle for later docker
 	// calls and the id is captured for diagnostics and assertions.
-	out, err := dockerCmd(
+	runArgs := []string{"run", "-d", "--name", h.container, "--network", h.network, "-p", "127.0.0.1::22"}
-		ctx, "run", "-d",
+	runArgs = append(runArgs, dockerDNS()...)
-		"--name", h.container,
+	runArgs = append(runArgs, h.imageTag)
-		"--network", h.network,
+	out, err := dockerCmd(ctx, runArgs...)
-		"-p", "127.0.0.1::22",
-		h.imageTag,
-	)
 	if err != nil {
 		return fmt.Errorf("start %s fixture container: %w", h.Fixture.Name, err)
 	}
@@ -244,6 +249,23 @@ func (h *Harness) Start(ctx context.Context) error {
 	return nil
 }
 
+// dockerDNS returns the `--dns` arguments to pin for fixture containers,
+// parsed from the comma-separated RSMON_TEST_DOCKER_DNS environment
+// variable. It is empty by default (Docker's embedded DNS). The override
+// exists so environments with flaky local resolvers can pin a reliable
+// upstream for the internet-facing installs (go.dev, rocketgit.ru,
+// proxy.golang.org), which would otherwise fail intermittently on DNS
+// timeouts.
+func dockerDNS() []string {
+	var args []string
+	for _, ns := range strings.Split(os.Getenv("RSMON_TEST_DOCKER_DNS"), ",") {
+		if ns = strings.TrimSpace(ns); ns != "" {
+			args = append(args, "--dns", ns)
+		}
+	}
+	return args
+}
+
 // Stop releases every resource the harness created: the container, its
 // dedicated network, the per-instance fixture image tag (never a shared
 // base image), and the temp known_hosts directory. It is idempotent and

internal/installer/harness/harness_test.go

@@ -235,6 +235,21 @@ func TestSetDockerBin(t *testing.T) {
 	SetDockerBin("")
 }
 
+func TestDockerDNSOverride(t *testing.T) {
+	t.Setenv("RSMON_TEST_DOCKER_DNS", "")
+	if got := dockerDNS(); len(got) != 0 {
+		t.Fatalf("dockerDNS() with empty env = %v, want none", got)
+	}
+	t.Setenv("RSMON_TEST_DOCKER_DNS", "8.8.8.8, 1.1.1.1")
+	if got := dockerDNS(); len(got) != 4 || got[0] != "--dns" || got[1] != "8.8.8.8" || got[3] != "1.1.1.1" {
+		t.Fatalf("dockerDNS() = %v", got)
+	}
+	t.Setenv("RSMON_TEST_DOCKER_DNS", "  ,,")
+	if got := dockerDNS(); len(got) != 0 {
+		t.Fatalf("dockerDNS() with blank entries = %v", got)
+	}
+}
+
 // writeStubDocker installs a fake docker binary that records its argv to
 // logPath and returns the recorded path. The stub succeeds for build,
 // network, run, and teardown calls; `port` fails so Start fails after

internal/installer/harness/integration_test.go

@@ -1,6 +1,7 @@
 package harness
 
 import (
+	"bytes"
 	"context"
 	"crypto/ed25519"
 	"crypto/rand"
@@ -14,6 +15,7 @@ import (
 	"golang.org/x/crypto/ssh"
 	"golang.org/x/crypto/ssh/knownhosts"
 
+	"rocketgit.ru/rsmon/worker/internal/installer"
 	"rocketgit.ru/rsmon/worker/internal/sshinstall"
 )
 
@@ -266,6 +268,236 @@ func TestHarnessHostKeyStable(t *testing.T) {
 	}
 }
 
+// TestSourceInstallFixtures is the work-package-3 acceptance test: each
+// distro fixture starts clean (no Go, no worker source) and the real
+// installer executes the full source flow over SSH - prerequisite
+// install, verified Go toolchain download/extraction, clone/update of the
+// public repository, resolved branch/commit record, and a build to a
+// staging path. The running service and its config are deliberately not
+// installed (that is work package 4). A rerun exercises idempotency.
+//
+// Opt-in: set RSMON_TEST_DOCKER=1 (see make test-ssh).
+func TestSourceInstallFixtures(t *testing.T) {
+	SkipUnlessEnabled(t)
+
+	for _, f := range Fixtures() {
+		f := f
+		t.Run(f.Name, func(t *testing.T) {
+			h, err := New("source-"+f.Name, f)
+			if err != nil {
+				t.Fatal(err)
+			}
+			ctx, cancel := context.WithTimeout(context.Background(), 30*time.Minute)
+			defer cancel()
+			if err := h.Start(ctx); err != nil {
+				t.Fatalf("start %s fixture: %v", f.Name, err)
+			}
+			t.Cleanup(func() {
+				if err := h.Stop(); err != nil {
+					t.Errorf("stop %s fixture: %v", f.Name, err)
+				}
+			})
+
+			// Clean state: no Go toolchain, no source, no leftover
+			// toolchain temp dirs.
+			client, err := h.Dial()
+			if err != nil {
+				t.Fatalf("dial %s fixture: %v", f.Name, err)
+			}
+			probe, err := RunCommand(client, "command -v go || true; test ! -e /usr/local/go && echo NO_GO; test ! -e /opt/rsmon-worker-src && echo NO_SOURCE; ls /tmp | grep -q rsmon-toolchain && echo LEAK; ls /usr/local 2>/dev/null | grep -qE 'go-staging|go-backup' && echo LEAK; echo DONE")
+			if err != nil {
+				t.Fatalf("clean-state probe: %v", err)
+			}
+			clean := string(probe)
+			if !strings.Contains(clean, "NO_GO") || !strings.Contains(clean, "NO_SOURCE") {
+				t.Fatalf("fixture is not clean: %q", clean)
+			}
+			if strings.Contains(clean, "LEAK") {
+				t.Fatalf("fixture has leftover toolchain temp dirs: %q", clean)
+			}
+			client.Close() //nolint:errcheck
+
+			opts := installer.SourceInstallOptions{
+				SSHOptions: installer.SSHOptions{
+					Host:           "127.0.0.1",
+					Port:           h.Port(),
+					User:           f.UserOrDefault(),
+					IdentityFile:   testKeyPath(),
+					KnownHostsFile: h.KnownHostsPath(),
+				},
+			}
+			if repo := strings.TrimSpace(os.Getenv("RSMON_TEST_SOURCE_REPO")); repo != "" {
+				opts.Repo = repo
+			}
+			if branch := strings.TrimSpace(os.Getenv("RSMON_TEST_SOURCE_BRANCH")); branch != "" {
+				opts.Branch = branch
+			}
+
+			res, err := installer.SourceInstall(opts)
+			if err != nil {
+				t.Fatalf("source install on %s: %v", f.Name, err)
+			}
+			t.Logf("%s: %s -> branch=%s commit=%s staged=%s", f.Name, res.Detection.Summarize(),
+				res.ResolvedBranch, res.ResolvedCommit, res.StageBinary)
+
+			if res.Detection.Distro != f.Distro || res.Detection.PackageManager != f.Pkg || res.Detection.InitSystem != f.Init {
+				t.Fatalf("detection = %+v, want %s/%s/%s", res.Detection, f.Distro, f.Pkg, f.Init)
+			}
+			if res.GoArch != "linux-"+strings.TrimPrefix(res.Plan.Toolchain.Arch, "linux-") {
+				t.Fatalf("resolved arch = %q, want %q", res.GoArch, res.Plan.Toolchain.Arch)
+			}
+			if res.ResolvedBranch == "" || len(res.ResolvedCommit) != 40 {
+				t.Fatalf("resolved branch/commit incomplete: %s @ %s", res.ResolvedBranch, res.ResolvedCommit)
+			}
+			if res.StageBinary == "" || res.RecordFile == "" || res.ToolchainDir == "" {
+				t.Fatalf("result paths incomplete: %+v", res)
+			}
+
+			client, err = h.Dial()
+			if err != nil {
+				t.Fatalf("redial: %v", err)
+			}
+			defer client.Close() //nolint:errcheck
+			assertSourceInstallState(t, client, f.Name, res)
+
+			// Idempotent rerun: succeeds, resolves the same branch,
+			// reuses the toolchain, and leaks no temp files.
+			res2, err := installer.SourceInstall(opts)
+			if err != nil {
+				t.Fatalf("source install rerun on %s: %v", f.Name, err)
+			}
+			if res2.ResolvedBranch != res.ResolvedBranch || len(res2.ResolvedCommit) != 40 {
+				t.Fatalf("rerun resolved = %s @ %s, want branch %s", res2.ResolvedBranch, res2.ResolvedCommit, res.ResolvedBranch)
+			}
+			assertSourceInstallState(t, client, f.Name, res2)
+			if out, err := RunCommand(client, "leak=0; ls /tmp | grep -q rsmon-toolchain && leak=1; ls /usr/local 2>/dev/null | grep -qE 'go-staging|go-backup' && leak=1; [ \"$leak\" -eq 1 ] && echo LEAK || echo CLEAN"); err != nil || strings.TrimSpace(string(out)) != "CLEAN" {
+				t.Fatalf("toolchain temp dirs leaked after rerun: %q, %v", out, err)
+			}
+		})
+	}
+}
+
+// assertSourceInstallState verifies the remote side-effects of a source
+// install: the toolchain reports the pinned version, the staging binary
+// exists and reports the resolved commit, and the record file carries
+// the resolved branch and commit.
+func assertSourceInstallState(t *testing.T, client *ssh.Client, name string, res *installer.SourceInstallResult) {
+	t.Helper()
+
+	out, err := RunCommand(client, res.ToolchainDir+"/bin/go version")
+	if err != nil {
+		t.Fatalf("%s: toolchain missing: %v", name, err)
+	}
+	if !strings.Contains(string(out), "go"+res.Plan.Toolchain.Version) {
+		t.Fatalf("%s: toolchain version = %q, want go%s", name, out, res.Plan.Toolchain.Version)
+	}
+
+	out, err = RunCommand(client, "test -x "+shellQuote(res.StageBinary)+" && echo BUILT")
+	if err != nil || !strings.Contains(string(out), "BUILT") {
+		t.Fatalf("%s: staging binary not present at %s: %q, %v", name, res.StageBinary, out, err)
+	}
+	out, err = RunCommand(client, shellQuote(res.StageBinary)+" --version")
+	if err != nil {
+		t.Fatalf("%s: staging binary --version: %v", name, err)
+	}
+	if !strings.Contains(string(out), "commit="+res.ResolvedCommit[:12]) {
+		t.Fatalf("%s: staging binary reports commit %q, want short %s", name, out, res.ResolvedCommit[:12])
+	}
+
+	record, err := RunCommand(client, "cat "+shellQuote(res.RecordFile))
+	if err != nil {
+		t.Fatalf("%s: read record file: %v", name, err)
+	}
+	if !strings.Contains(string(record), "branch="+res.ResolvedBranch) || !strings.Contains(string(record), "commit="+res.ResolvedCommit) {
+		t.Fatalf("%s: record file = %q, want branch=%s commit=%s", name, record, res.ResolvedBranch, res.ResolvedCommit)
+	}
+}
+
+// TestSourceInstallDirtyCheckoutPreservesStaging is the work-package-3
+// failure-atomicity test: after a successful install, dirtying the
+// tracked working tree makes the next checkout fail closed. The rerun
+// must report the checkout error without ever reaching the build step,
+// leaving the previous staging binary and commit record byte-for-byte
+// unchanged, and without leaking toolchain staging/backup directories.
+func TestSourceInstallDirtyCheckoutPreservesStaging(t *testing.T) {
+	SkipUnlessEnabled(t)
+
+	f := Fixtures()[0] // alpine is the smallest fixture
+	h, err := New("dirty-"+f.Name, f)
+	if err != nil {
+		t.Fatal(err)
+	}
+	ctx, cancel := context.WithTimeout(context.Background(), 30*time.Minute)
+	defer cancel()
+	if err := h.Start(ctx); err != nil {
+		t.Fatalf("start %s fixture: %v", f.Name, err)
+	}
+	t.Cleanup(func() {
+		if err := h.Stop(); err != nil {
+			t.Errorf("stop %s fixture: %v", f.Name, err)
+		}
+	})
+
+	opts := installer.SourceInstallOptions{
+		SSHOptions: installer.SSHOptions{
+			Host:           "127.0.0.1",
+			Port:           h.Port(),
+			User:           f.UserOrDefault(),
+			IdentityFile:   testKeyPath(),
+			KnownHostsFile: h.KnownHostsPath(),
+		},
+	}
+	if repo := strings.TrimSpace(os.Getenv("RSMON_TEST_SOURCE_REPO")); repo != "" {
+		opts.Repo = repo
+	}
+	res, err := installer.SourceInstall(opts)
+	if err != nil {
+		t.Fatalf("initial source install: %v", err)
+	}
+
+	client, err := h.Dial()
+	if err != nil {
+		t.Fatalf("dial: %v", err)
+	}
+	defer client.Close() //nolint:errcheck
+
+	// Dirty a tracked file so the rerun's checkout refuses to proceed.
+	// Makefile differs between master and master~1 (unlike go.mod).
+	if _, err := RunCommand(client, "git -C "+shellQuote(res.Plan.BuildDir)+" checkout -q master~1 -- Makefile"); err != nil {
+		t.Fatalf("dirty the working tree: %v", err)
+	}
+	beforeBinary, err := RunCommand(client, "sha256sum "+shellQuote(res.StageBinary))
+	if err != nil {
+		t.Fatal(err)
+	}
+	beforeRecord, err := RunCommand(client, "cat "+shellQuote(res.RecordFile))
+	if err != nil {
+		t.Fatal(err)
+	}
+
+	if _, err := installer.SourceInstall(opts); err == nil || !strings.Contains(err.Error(), "check out branch") {
+		t.Fatalf("rerun err = %v, want checkout failure on dirty tree", err)
+	}
+
+	afterBinary, err := RunCommand(client, "sha256sum "+shellQuote(res.StageBinary))
+	if err != nil {
+		t.Fatal(err)
+	}
+	afterRecord, err := RunCommand(client, "cat "+shellQuote(res.RecordFile))
+	if err != nil {
+		t.Fatal(err)
+	}
+	if !bytes.Equal(bytes.TrimSpace(beforeBinary), bytes.TrimSpace(afterBinary)) {
+		t.Fatalf("staging binary changed after failed rerun:\nbefore: %s\nafter: %s", beforeBinary, afterBinary)
+	}
+	if !bytes.Equal(bytes.TrimSpace(beforeRecord), bytes.TrimSpace(afterRecord)) {
+		t.Fatalf("commit record changed after failed rerun:\nbefore: %s\nafter: %s", beforeRecord, afterRecord)
+	}
+	if out, err := RunCommand(client, "leak=0; ls /tmp | grep -q rsmon-toolchain && leak=1; ls /usr/local 2>/dev/null | grep -qE 'go-staging|go-backup' && leak=1; [ \"$leak\" -eq 1 ] && echo LEAK || echo CLEAN"); err != nil || strings.TrimSpace(string(out)) != "CLEAN" {
+		t.Fatalf("toolchain staging leaked after failed rerun: %q, %v", out, err)
+	}
+}
+
 // makeProber builds an sshinstall.FileProber over a live SSH session.
 func makeProber(client *ssh.Client) sshinstall.FileProber {
 	return func(paths ...string) map[string]bool {

internal/installer/sourceinstall.go

@@ -0,0 +1,558 @@
+package installer
+
+import (
+	"errors"
+	"fmt"
+	"net"
+	"path/filepath"
+	"regexp"
+	"strconv"
+	"strings"
+	"time"
+
+	"golang.org/x/crypto/ssh"
+
+	"rocketgit.ru/rsmon/worker/internal/sshinstall"
+)
+
+// SourceInstallOptions drives the remote source installation (work
+// package 3 of docs/source-installation.md). It reuses the deploy
+// command's SSHOptions for authentication and host-key verification and
+// adds the source-build knobs. It never carries a worker token or
+// control-plane credential: the built worker is staged, not configured
+// or started, so no secret is ever sent to the remote host.
+type SourceInstallOptions struct {
+	SSHOptions
+
+	// Repo is the public worker repository to clone or update. Empty
+	// uses the sshinstall default. Only https URLs without userinfo are
+	// accepted.
+	Repo string
+	// Branch pins the branch to build. Empty resolves the remote's
+	// default branch (the public repo currently publishes "master");
+	// the resolved branch and commit are recorded in the build dir.
+	Branch string
+	// GoVersion defaults to the pinned sshinstall toolchain (1.26.0).
+	// Non-default versions have no baked checksum yet and are rejected.
+	GoVersion string
+	// GoArch optionally pins the Go download archive suffix (e.g.
+	// "amd64"); empty derives it from the remote `uname -m`.
+	GoArch string
+	// BuildDir is the remote clone/build directory.
+	BuildDir string
+	// GoModuleProxy overrides GOPROXY for the remote build.
+	GoModuleProxy string
+	// ToolchainDir is where the verified Go toolchain is installed.
+	// It must be an absolute path ending in /go (default
+	// /usr/local/go). Replacement is atomic: the new toolchain is
+	// downloaded, verified, and staged before the prior one is moved
+	// aside, and the prior one is restored if the swap fails.
+	ToolchainDir string
+	// StageBinary is where the built worker binary is written. It must
+	// be absolute and defaults to <BuildDir>/rsmon-worker. The running
+	// service and its config are NOT touched by this work package.
+	StageBinary string
+	// SessionTimeout bounds each remote command. 0 uses the default
+	// (30 minutes); the build step can legitimately run for minutes.
+	SessionTimeout time.Duration
+}
+
+// SourceInstallResult is what a source installation resolved to. The
+// resolved branch and commit are recorded on the remote host in
+// RecordFile, and the built binary is left at StageBinary for the next
+// (service-activation) work package to install atomically.
+type SourceInstallResult struct {
+	Detection      sshinstall.Detection
+	Plan           sshinstall.SourcePlan
+	GoArch         string // resolved archive suffix, e.g. "linux-amd64"
+	ToolchainDir   string
+	ResolvedBranch string
+	ResolvedCommit string
+	RecordFile     string
+	StageBinary    string
+}
+
+// defaultToolchainDir is the standard Go installation prefix.
+const defaultToolchainDir = "/usr/local/go"
+
+// defaultSessionTimeout bounds each remote command when the operator
+// does not configure one. The staging build and first-time module
+// downloads can run for minutes, so this is generous.
+const defaultSessionTimeout = 30 * time.Minute
+
+// commitRecordName is the file (inside BuildDir) that records the
+// resolved branch and commit the build was produced from.
+const commitRecordName = "rsmon-worker.commit"
+
+var (
+	commitPattern     = regexp.MustCompile(`^[0-9a-f]{40}$`)
+	branchNamePattern = regexp.MustCompile(`^[A-Za-z0-9][A-Za-z0-9._/-]*$`)
+)
+
+// sourceExecutor bundles the SSH client, privilege options, and per
+// command timeout used by every remote source-install step.
+type sourceExecutor struct {
+	client  *ssh.Client
+	ssh     SSHOptions
+	timeout time.Duration
+}
+
+// runPrivileged executes a command through the SSHOptions privilege path
+// (root, passwordless sudo, or sudo -S) and returns bounded stdout.
+func (e *sourceExecutor) runPrivileged(command string) ([]byte, error) {
+	cmd, stdin := sudoWrap(e.ssh.User, e.ssh.SudoPassword, command)
+	return runRemoteOutput(e.client, cmd, stdin, e.timeout)
+}
+
+// runPlain executes a command as the SSH user and returns bounded
+// stdout.
+func (e *sourceExecutor) runPlain(command string) ([]byte, error) {
+	return runRemoteOutput(e.client, command, nil, e.timeout)
+}
+
+// fileProber builds the sshinstall.FileProber used for init-system
+// detection over a live SSH session.
+func (e *sourceExecutor) fileProber() sshinstall.FileProber {
+	return func(paths ...string) map[string]bool {
+		quoted := make([]string, len(paths))
+		for i, p := range paths {
+			quoted[i] = shellQuote(p)
+		}
+		expr := "for p in " + strings.Join(quoted, " ") + "; do [ -e \"$p\" ] && printf '%s\\n' \"$p\"; done; true"
+		out, err := e.runPlain(expr)
+		if err != nil {
+			return nil
+		}
+		present := make(map[string]bool, len(paths))
+		for _, line := range strings.Split(strings.TrimSpace(string(out)), "\n") {
+			if line = strings.TrimSpace(line); line != "" {
+				present[line] = true
+			}
+		}
+		return present
+	}
+}
+
+// SourceInstall executes the source-install flow over SSH: it reuses the
+// deploy command's SSH authentication and host-key verification, detects
+// the remote host, plans the pinned toolchain and package prerequisites,
+// then installs packages, downloads and verifies the Go toolchain,
+// clones/updates the public repository (verifying an existing checkout's
+// origin matches the configured repository), checks out the resolved
+// branch, builds the worker to a staging path, and only then records the
+// resolved branch and commit.
+//
+// The running service, its configuration, and its data directory are
+// deliberately untouched: atomic activation and rollback are the next
+// work package. Every remote step runs with the same privilege path as
+// `deploy` (root, passwordless sudo, or sudo -S), every interpolated
+// value is single-quoted, every step script fails closed (`set -eu` or
+// explicit `&&`/retry), and every failure returns a bounded, actionable
+// error. Each remote command is capped by SessionTimeout and its stdout
+// is size-bounded.
+func SourceInstall(opts SourceInstallOptions) (*SourceInstallResult, error) {
+	opts, err := normalizeSourceOptions(opts)
+	if err != nil {
+		return nil, err
+	}
+	auth, err := sshAuth(opts.SSHOptions)
+	if err != nil {
+		return nil, err
+	}
+	hostKey, err := hostKeyCallback(opts.SSHOptions)
+	if err != nil {
+		return nil, err
+	}
+	client, err := ssh.Dial("tcp", net.JoinHostPort(opts.Host, strconv.Itoa(opts.Port)), &ssh.ClientConfig{
+		User:            opts.User,
+		Auth:            auth,
+		HostKeyCallback: hostKey,
+		Timeout:         15 * time.Second,
+	})
+	if err != nil {
+		return nil, fmt.Errorf("connect to %s: %w", opts.Host, err)
+	}
+	defer client.Close() //nolint:errcheck
+
+	executor := &sourceExecutor{client: client, ssh: opts.SSHOptions, timeout: opts.SessionTimeout}
+
+	osRelease, err := executor.runPlain("cat /etc/os-release")
+	if err != nil {
+		return nil, fmt.Errorf("read remote /etc/os-release: %w", err)
+	}
+	uname, err := executor.runPlain("uname -m")
+	if err != nil {
+		return nil, fmt.Errorf("read remote machine architecture: %w", err)
+	}
+	detection := sshinstall.Detect(string(osRelease), executor.fileProber())
+	plan, err := sshinstall.PlanSource(detection, sshinstall.SourceOptions{
+		Repo:          opts.Repo,
+		Branch:        opts.Branch,
+		GoVersion:     opts.GoVersion,
+		GoArch:        opts.GoArch,
+		UnameM:        strings.TrimSpace(string(uname)),
+		BuildDir:      opts.BuildDir,
+		GoModuleProxy: opts.GoModuleProxy,
+	})
+	if err != nil {
+		return nil, err
+	}
+
+	stage := opts.StageBinary
+	if stage == "" {
+		stage = filepath.Join(plan.BuildDir, "rsmon-worker")
+	}
+	result := &SourceInstallResult{
+		Detection:    detection,
+		Plan:         plan,
+		GoArch:       plan.Toolchain.Arch,
+		ToolchainDir: opts.ToolchainDir,
+		StageBinary:  stage,
+	}
+
+	if len(plan.Packages) > 0 {
+		script := "sh -c " + shellQuote(packageScript(detection.PackageManager, plan.Packages))
+		if _, err := executor.runPrivileged(script); err != nil {
+			return nil, fmt.Errorf("install prerequisites via %s: %w", detection.PackageManager, err)
+		}
+	}
+
+	script := "sh -c " + shellQuote(toolchainScript(plan.Toolchain, opts.ToolchainDir))
+	if _, err := executor.runPrivileged(script); err != nil {
+		return nil, fmt.Errorf("install Go %s toolchain: %w", plan.Toolchain.Version, err)
+	}
+
+	// Clone or update. An existing checkout must point at the configured
+	// repository, or the install fails before fetching or building.
+	script = "sh -c " + shellQuote(cloneUpdateScript(plan.Repo, plan.BuildDir))
+	if _, err := executor.runPrivileged(script); err != nil {
+		return nil, fmt.Errorf("clone/update source repository: %w", err)
+	}
+
+	out, err := executor.runPrivileged("sh -c " + shellQuote(resolveBranchScript(plan.BuildDir)))
+	if err != nil {
+		return nil, fmt.Errorf("resolve remote default branch: %w", err)
+	}
+	branch, err := parseResolvedBranch(string(out))
+	if err != nil {
+		return nil, err
+	}
+	if plan.Branch != "" && plan.Branch != branch {
+		ref := "refs/remotes/origin/" + plan.Branch
+		if _, err := executor.runPrivileged("sh -c " + shellQuote(refExistsScript(plan.BuildDir, ref))); err != nil {
+			return nil, fmt.Errorf("branch %q does not exist on the remote repository: %w", plan.Branch, err)
+		}
+		branch = plan.Branch
+	}
+	result.ResolvedBranch = branch
+
+	// Checkout fails closed: a dirty tree or missing branch aborts before
+	// the build, so the previous staging binary is left untouched.
+	out, err = executor.runPrivileged("sh -c " + shellQuote(checkoutScript(plan.BuildDir, branch)))
+	if err != nil {
+		return nil, fmt.Errorf("check out branch %q: %w", branch, err)
+	}
+	commit, err := parseResolvedCommit(string(out))
+	if err != nil {
+		return nil, fmt.Errorf("resolve commit: %w", err)
+	}
+	result.ResolvedCommit = commit
+
+	// Build with the repository's own flags (same -ldflags shape the
+	// worker Makefile uses), resolving COMMIT from the checkout and
+	// BUILD_DATE at install time. The binary is built to a temp path,
+	// verified, and atomically swapped into the staging path; a failed
+	// build leaves the previous staging binary in place.
+	buildDate := time.Now().UTC().Format("2006-01-02T15:04:05Z")
+	ldflags := fmt.Sprintf("-s -w -X main.version=dev -X main.commit=%s -X main.buildDate=%s", commit[:12], buildDate)
+	script = "sh -c " + shellQuote(buildScript(opts.ToolchainDir, plan.BuildDir, plan.GoModuleProxy, stage, ldflags))
+	if _, err := executor.runPrivileged(script); err != nil {
+		return nil, fmt.Errorf("build worker binary: %w", err)
+	}
+
+	// The commit record is written only after a successful build, so the
+	// record and the staged binary always correspond to the same commit.
+	result.RecordFile = filepath.Join(plan.BuildDir, commitRecordName)
+	if _, err := executor.runPrivileged("sh -c " + shellQuote(commitRecordScript(plan.BuildDir, branch, commit))); err != nil {
+		return nil, fmt.Errorf("record resolved commit: %w", err)
+	}
+	return result, nil
+}
+
+// normalizeSourceOptions validates operator input before any remote
+// connection or mutation. Every value that later reaches a remote shell
+// is constrained here.
+func normalizeSourceOptions(o SourceInstallOptions) (SourceInstallOptions, error) {
+	if o.Host == "" || o.User == "" {
+		return o, errors.New("--host and --user are required for source install")
+	}
+	if o.Port == 0 {
+		o.Port = 22
+	}
+	if o.Port < 1 || o.Port > 65535 {
+		return o, errors.New("SSH port must be between 1 and 65535")
+	}
+	if o.Branch != "" && !validBranchName(o.Branch) {
+		return o, fmt.Errorf("invalid branch %q: only A-Za-z0-9, dots, underscores, slashes, and hyphens are allowed", o.Branch)
+	}
+	if o.GoVersion != "" && !sshinstall.ValidGoVersion(o.GoVersion) {
+		return o, fmt.Errorf("invalid Go version %q: only digits, letters, dots, dashes, and underscores are allowed", o.GoVersion)
+	}
+	if o.GoArch != "" && !sshinstall.ValidGoArch(o.GoArch) {
+		return o, fmt.Errorf("invalid Go architecture %q: only letters, digits, dashes, and underscores are allowed", o.GoArch)
+	}
+	if err := sshinstall.ValidateRepoURL(o.Repo); err != nil {
+		return o, fmt.Errorf("invalid repository: %w", err)
+	}
+	if o.ToolchainDir == "" {
+		o.ToolchainDir = defaultToolchainDir
+	}
+	if !strings.HasPrefix(o.ToolchainDir, "/") || filepath.Base(o.ToolchainDir) != "go" {
+		return o, fmt.Errorf("toolchain directory must be an absolute path ending in /go, got %q", o.ToolchainDir)
+	}
+	if o.StageBinary != "" && !strings.HasPrefix(o.StageBinary, "/") {
+		return o, fmt.Errorf("staging binary path must be absolute, got %q", o.StageBinary)
+	}
+	if o.SessionTimeout <= 0 {
+		o.SessionTimeout = defaultSessionTimeout
+	}
+	return o, nil
+}
+
+// validBranchName reports whether a branch is a safe git branch name
+// that can be interpolated into remote commands. The charset check is
+// the command-injection boundary; the extra rules reject git-invalid or
+// ambiguous refname patterns.
+func validBranchName(branch string) bool {
+	if !branchNamePattern.MatchString(branch) {
+		return false
+	}
+	if strings.HasPrefix(branch, "-") || strings.HasPrefix(branch, "/") ||
+		strings.Contains(branch, "..") || strings.Contains(branch, "@{") ||
+		strings.Contains(branch, "//") || strings.HasSuffix(branch, ".") ||
+		strings.HasSuffix(branch, "/") {
+		return false
+	}
+	return true
+}
+
+// parseResolvedBranch turns the `git symbolic-ref` output
+// ("origin/master\n") into the short branch name, validating it so
+// remote-controlled output can never inject a command.
+func parseResolvedBranch(raw string) (string, error) {
+	branch := strings.TrimSpace(raw)
+	branch = strings.TrimPrefix(branch, "origin/")
+	if !validBranchName(branch) {
+		return "", fmt.Errorf("remote reported an invalid default branch %q", strings.TrimSpace(raw))
+	}
+	return branch, nil
+}
+
+// parseResolvedCommit extracts the 40-hex commit from `git rev-parse
+// HEAD` output, taking the last whitespace-separated token so unrelated
+// stdout cannot satisfy the parse.
+func parseResolvedCommit(raw string) (string, error) {
+	fields := strings.Fields(strings.TrimSpace(raw))
+	if len(fields) == 0 {
+		return "", errors.New("remote reported no commit")
+	}
+	commit := fields[len(fields)-1]
+	if !commitPattern.MatchString(commit) {
+		return "", fmt.Errorf("remote reported an invalid resolved commit %q", commit)
+	}
+	return commit, nil
+}
+
+// quoteList renders each item as a single shell-quoted word.
+func quoteList(items []string) string {
+	quoted := make([]string, len(items))
+	for i, item := range items {
+		quoted[i] = shellQuote(item)
+	}
+	return strings.Join(quoted, " ")
+}
+
+// packageScript installs the minimal build prerequisites with the
+// distro's package manager. It is idempotent on every supported manager
+// and never installs a C compiler (the worker builds with CGO disabled).
+func packageScript(pkg sshinstall.PackageManager, pkgs []string) string {
+	quoted := quoteList(pkgs)
+	switch pkg {
+	case sshinstall.PkgApk:
+		return "apk add --no-cache " + quoted
+	case sshinstall.PkgApt:
+		// Ubuntu/Debian need a fresh package index before installing.
+		return "export DEBIAN_FRONTEND=noninteractive\napt-get update\napt-get install -y --no-install-recommends " + quoted
+	case sshinstall.PkgPacman:
+		return "pacman -Sy --noconfirm --needed " + quoted
+	case sshinstall.PkgDnf:
+		return "dnf install -y --setopt=install_weak_deps=False " + quoted
+	case sshinstall.PkgYum:
+		return "yum install -y " + quoted
+	default:
+		return ""
+	}
+}
+
+// toolchainScript downloads the pinned Go toolchain, verifies its
+// published SHA-256 before extraction, stages the extract on the same
+// filesystem as the target, verifies the staged toolchain reports the
+// target version, and only then swaps it into place. The prior toolchain
+// (when present) is moved to a sibling backup first and is restored if
+// the swap fails, so a failed download/verify/extract/swap always leaves
+// the prior Go untouched. A present toolchain already reporting the
+// target version is reused (idempotent rerun). Temp and staging
+// directories are removed on success and failure.
+func toolchainScript(tc sshinstall.Toolchain, toolchainDir string) string {
+	parent := filepath.Dir(toolchainDir)
+	want := "go" + tc.Version
+	var b strings.Builder
+	b.WriteString("set -eu\n")
+	b.WriteString("parent=" + shellQuote(parent) + "\n")
+	b.WriteString("toolchain=" + shellQuote(toolchainDir) + "\n")
+	b.WriteString("want=" + shellQuote(want) + "\n")
+	b.WriteString("if [ -x \"$toolchain/bin/go\" ]; then\n")
+	b.WriteString("  have=\"$($toolchain/bin/go version 2>/dev/null | awk '{print $3}')\"\n")
+	b.WriteString("  if [ \"$have\" = \"$want\" ]; then\n")
+	b.WriteString("    echo \"go toolchain already present: $have\"\n")
+	b.WriteString("    exit 0\n")
+	b.WriteString("  fi\n")
+	b.WriteString("fi\n")
+	b.WriteString("work=\"$(mktemp -d /tmp/rsmon-toolchain-XXXXXX)\"\n")
+	b.WriteString("staging=\"$(mktemp -d \"$parent/.go-staging-XXXXXX\")\"\n")
+	b.WriteString("trap 'rm -rf \"$work\" \"$staging\"' EXIT HUP INT TERM\n")
+	b.WriteString("archive=\"$work/go" + tc.Version + "." + tc.Arch + ".tar.gz\"\n")
+	b.WriteString("curl -fsSL --retry 3 --retry-delay 2 -o \"$archive\" " + shellQuote(tc.URL) + "\n")
+	b.WriteString("printf '%s  %s\\n' " + shellQuote(tc.SHA256) + " \"$archive\" | sha256sum -c -\n")
+	b.WriteString("tar -C \"$staging\" -xzf \"$archive\"\n")
+	b.WriteString("staged=\"$($staging/go/bin/go version | awk '{print $3}')\"\n")
+	b.WriteString("if [ \"$staged\" != \"$want\" ]; then\n")
+	b.WriteString("  printf 'staged toolchain failed verification: %s\\n' \"$staged\" >&2\n")
+	b.WriteString("  exit 1\n")
+	b.WriteString("fi\n")
+	// Swap atomically on the same filesystem, preserving the prior
+	// toolchain in a sibling backup with rollback on failure.
+	b.WriteString("backup=\"\"\n")
+	b.WriteString("if [ -e \"$toolchain\" ]; then\n")
+	b.WriteString("  backup=\"$parent/.go-backup\"\n")
+	b.WriteString("  rm -rf \"$backup\"\n")
+	b.WriteString("  mv \"$toolchain\" \"$backup\"\n")
+	b.WriteString("fi\n")
+	b.WriteString("if ! mv \"$staging/go\" \"$toolchain\"; then\n")
+	b.WriteString("  if [ -n \"$backup\" ]; then\n")
+	b.WriteString("    mv \"$backup\" \"$toolchain\"\n")
+	b.WriteString("  fi\n")
+	b.WriteString("  exit 1\n")
+	b.WriteString("fi\n")
+	b.WriteString("if [ -n \"$backup\" ]; then\n")
+	b.WriteString("  rm -rf \"$backup\"\n")
+	b.WriteString("fi\n")
+	b.WriteString("\"$toolchain/bin/go\" version\n")
+	return b.String()
+}
+
+// cloneUpdateScript clones the repository when missing and otherwise
+// fetches the latest refs, so a rerun updates in place. Before fetching
+// an existing checkout, it verifies the configured repository matches
+// the checkout's `remote.origin.url` exactly, so the installer can never
+// fetch or build an unconfigured repository. The clone/fetch is retried
+// up to three times (2s apart) because real repositories can be
+// transiently unreachable (DNS, TLS, or proxy hiccups). The script fails
+// closed: any exhausted retry exits non-zero.
+func cloneUpdateScript(repo, buildDir string) string {
+	return "set -u\n" +
+		"repo=" + shellQuote(repo) + "\n" +
+		"dir=" + shellQuote(buildDir) + "\n" +
+		"if [ ! -d \"$dir/.git\" ]; then\n" +
+		"  attempt=0\n" +
+		"  while [ \"$attempt\" -lt 3 ]; do\n" +
+		"    if git clone \"$repo\" \"$dir\"; then\n" +
+		"      exit 0\n" +
+		"    fi\n" +
+		"    attempt=$((attempt + 1))\n" +
+		"    sleep 2\n" +
+		"  done\n" +
+		"  exit 1\n" +
+		"fi\n" +
+		"origin=\"$(git -C \"$dir\" config --get remote.origin.url || true)\"\n" +
+		"if [ \"$origin\" != \"$repo\" ]; then\n" +
+		"  printf 'existing checkout origin does not match configured repository\\nconfigured: %s\\nfound: %s\\n' \"$repo\" \"$origin\" >&2\n" +
+		"  exit 1\n" +
+		"fi\n" +
+		"attempt=0\n" +
+		"while [ \"$attempt\" -lt 3 ]; do\n" +
+		"  if git -C \"$dir\" fetch --prune origin; then\n" +
+		"    exit 0\n" +
+		"  fi\n" +
+		"  attempt=$((attempt + 1))\n" +
+		"  sleep 2\n" +
+		"done\n" +
+		"exit 1\n"
+}
+
+// resolveBranchScript prints the remote's default branch short name
+// (with an "origin/" prefix) via origin/HEAD. It fails closed so a
+// set-head failure aborts rather than resolving a stale default.
+func resolveBranchScript(buildDir string) string {
+	return "set -eu\n" +
+		"git -C " + shellQuote(buildDir) + " remote set-head origin --auto >/dev/null\n" +
+		"git -C " + shellQuote(buildDir) + " symbolic-ref --short refs/remotes/origin/HEAD\n"
+}
+
+// refExistsScript verifies a remote-tracking ref exists (exit 0) without
+// emitting output.
+func refExistsScript(buildDir, ref string) string {
+	return "git -C " + shellQuote(buildDir) + " show-ref --verify --quiet " + shellQuote(ref)
+}
+
+// checkoutScript moves the local branch to the resolved remote branch
+// and prints the resolved commit. It fails closed (`set -eu`): before the
+// destructive `checkout -B` (which would silently discard local changes)
+// it refuses when the tracked working tree is dirty, so a checkout
+// failure can never be masked by a stale `rev-parse` from the previous
+// checkout, and a failed checkout aborts before the build.
+func checkoutScript(buildDir, branch string) string {
+	return "set -eu\n" +
+		"git -C " + shellQuote(buildDir) + " diff --quiet || { echo 'working tree has uncommitted changes; refusing to overwrite' >&2; exit 1; }\n" +
+		"git -C " + shellQuote(buildDir) + " diff --cached --quiet || { echo 'working tree has staged changes; refusing to overwrite' >&2; exit 1; }\n" +
+		"git -C " + shellQuote(buildDir) + " checkout -q -B " + shellQuote(branch) + " " + shellQuote("origin/"+branch) + "\n" +
+		"git -C " + shellQuote(buildDir) + " rev-parse HEAD\n"
+}
+
+// commitRecordScript writes the resolved branch and commit to the build
+// dir record file with a bounded, greppable format. It runs only after a
+// successful build, so the record always matches the staged binary.
+func commitRecordScript(buildDir, branch, commit string) string {
+	path := shellQuote(filepath.Join(buildDir, commitRecordName))
+	format := shellQuote("branch=%s\\ncommit=%s\\n")
+	return "umask 022; printf " + format + " " + shellQuote(branch) + " " + shellQuote(commit) +
+		" > " + path + " && chmod 0644 " + path
+}
+
+// buildScript builds the worker with the repository's own flags into the
+// staging path and verifies the resulting binary runs. CGO is disabled,
+// trimpath keeps the build reproducible, and both caches (GOCACHE and
+// GOMODCACHE) live inside the build dir so reruns reuse them. The binary
+// is built to a sibling temp path, verified, and only then atomically
+// swapped over the previous staging binary, so a failed build never
+// replaces it.
+func buildScript(toolchainDir, buildDir, goproxy, stage, ldflags string) string {
+	var b strings.Builder
+	b.WriteString("set -eu\n")
+	b.WriteString("cd " + shellQuote(buildDir) + "\n")
+	b.WriteString("export PATH=" + shellQuote(toolchainDir+"/bin") + ":$PATH\n")
+	b.WriteString("export GOCACHE=" + shellQuote(buildDir+"/.gocache") + "\n")
+	b.WriteString("export GOMODCACHE=" + shellQuote(buildDir+"/.gomodcache") + "\n")
+	if goproxy != "" {
+		b.WriteString("export GOPROXY=" + shellQuote(goproxy) + "\n")
+	}
+	b.WriteString("stage=" + shellQuote(stage) + "\n")
+	b.WriteString("tmp=\"$stage.new\"\n")
+	b.WriteString("trap 'rm -f \"$tmp\"' EXIT HUP INT TERM\n")
+	b.WriteString("CGO_ENABLED=0 ")
+	b.WriteString(shellQuote(toolchainDir + "/bin/go"))
+	b.WriteString(" build -trimpath -ldflags=" + shellQuote(ldflags) + " -o \"$tmp\" ./cmd/rsmon-worker\n")
+	b.WriteString("\"$tmp\" --version\n")
+	b.WriteString("mv -f \"$tmp\" \"$stage\"\n")
+	return b.String()
+}

internal/installer/sourceinstall_ssh_test.go

@@ -0,0 +1,351 @@
+package installer
+
+import (
+	"crypto/ed25519"
+	"crypto/rand"
+	"fmt"
+	"net"
+	"strings"
+	"sync"
+	"testing"
+	"time"
+
+	"golang.org/x/crypto/ssh"
+
+	"rocketgit.ru/rsmon/worker/internal/sshinstall"
+)
+
+const (
+	fakeSSHPassword = "fake-ssh-password"
+	fakeCommitHex   = "deadbeefdeadbeefdeadbeefdeadbeefdeadbeef"
+	fakeOsRelease   = "ID=ubuntu\nNAME=\"Ubuntu\"\nVERSION_ID=24.04\n"
+)
+
+// fakeSSHServer is a minimal in-process SSH server that simulates a
+// remote Linux host for the SourceInstall orchestration tests. It uses
+// real golang.org/x/crypto/ssh transport (no mocked SSH library), so the
+// executor's dial, session, exec, and stdout/stderr plumbing is
+// exercised end to end, and it records every command it ran.
+type fakeSSHServer struct {
+	addr     string
+	onExec   func(command string) (stdout, stderr string, code int)
+	mu       sync.Mutex
+	commands []string
+}
+
+func startFakeSSHServer(t *testing.T, onExec func(command string) (string, string, int)) *fakeSSHServer {
+	t.Helper()
+	_, priv, err := ed25519.GenerateKey(rand.Reader)
+	if err != nil {
+		t.Fatal(err)
+	}
+	signer, err := ssh.NewSignerFromKey(priv)
+	if err != nil {
+		t.Fatal(err)
+	}
+	config := &ssh.ServerConfig{
+		PasswordCallback: func(_ ssh.ConnMetadata, pass []byte) (*ssh.Permissions, error) {
+			if string(pass) == fakeSSHPassword {
+				return nil, nil
+			}
+			return nil, fmt.Errorf("password rejected")
+		},
+	}
+	config.AddHostKey(signer)
+
+	ln, err := net.Listen("tcp", "127.0.0.1:0")
+	if err != nil {
+		t.Fatal(err)
+	}
+	t.Cleanup(func() { _ = ln.Close() })
+
+	srv := &fakeSSHServer{addr: ln.Addr().String(), onExec: onExec}
+	go func() {
+		for {
+			conn, err := ln.Accept()
+			if err != nil {
+				return
+			}
+			go srv.handleConn(conn, config)
+		}
+	}()
+	return srv
+}
+
+func (s *fakeSSHServer) Port() int {
+	_, port, err := net.SplitHostPort(s.addr)
+	if err != nil {
+		return 0
+	}
+	p := 0
+	fmt.Sscanf(port, "%d", &p)
+	return p
+}
+
+func (s *fakeSSHServer) Commands() []string {
+	s.mu.Lock()
+	defer s.mu.Unlock()
+	return append([]string(nil), s.commands...)
+}
+
+func (s *fakeSSHServer) handleConn(conn net.Conn, config *ssh.ServerConfig) {
+	sconn, chans, reqs, err := ssh.NewServerConn(conn, config)
+	if err != nil {
+		return
+	}
+	defer sconn.Close() //nolint:errcheck
+	go ssh.DiscardRequests(reqs)
+	for newChannel := range chans {
+		if newChannel.ChannelType() != "session" {
+			_ = newChannel.Reject(ssh.UnknownChannelType, "unknown channel type")
+			continue
+		}
+		channel, requests, err := newChannel.Accept()
+		if err != nil {
+			continue
+		}
+		go func() {
+			defer channel.Close()
+			s.handleSession(channel, requests)
+		}()
+	}
+}
+
+func (s *fakeSSHServer) handleSession(channel ssh.Channel, requests <-chan *ssh.Request) {
+	for req := range requests {
+		if req.Type != "exec" {
+			if req.WantReply {
+				_ = req.Reply(false, nil)
+			}
+			continue
+		}
+		var payload struct{ Command string }
+		if err := ssh.Unmarshal(req.Payload, &payload); err != nil {
+			if req.WantReply {
+				_ = req.Reply(false, nil)
+			}
+			continue
+		}
+		if req.WantReply {
+			_ = req.Reply(true, nil)
+		}
+		s.mu.Lock()
+		s.commands = append(s.commands, payload.Command)
+		s.mu.Unlock()
+		s.execCommand(channel, payload.Command)
+		return
+	}
+}
+
+func (s *fakeSSHServer) execCommand(channel ssh.Channel, command string) {
+	handler := s.onExec
+	if handler == nil {
+		handler = defaultFakeExec
+	}
+	stdout, stderr, code := handler(command)
+	_, _ = channel.Write([]byte(stdout))
+	_, _ = channel.Stderr().Write([]byte(stderr))
+	_, _ = channel.SendRequest("exit-status", false, ssh.Marshal(struct{ Status uint32 }{uint32(code)}))
+	_ = channel.CloseWrite()
+}
+
+// defaultFakeExec simulates a minimal Linux host: it answers os-release,
+// uname, the init-marker file probe, origin URL, branch resolution, and
+// rev-parse, and accepts every install step. A pinned-branch existence
+// check (show-ref) fails by default so the missing-branch path is
+// exercised without extra setup.
+func defaultFakeExec(command string) (string, string, int) {
+	switch {
+	case strings.Contains(command, "cat /etc/os-release"):
+		return fakeOsRelease, "", 0
+	case strings.Contains(command, "uname -m"):
+		return "x86_64\n", "", 0
+	case strings.Contains(command, "[ -e"):
+		return "/usr/lib/systemd/system\n", "", 0
+	case strings.Contains(command, "remote.origin.url"):
+		return sshinstall.DefaultRepo + "\n", "", 0
+	case strings.Contains(command, "symbolic-ref"):
+		return "origin/master\n", "", 0
+	case strings.Contains(command, "rev-parse HEAD"):
+		return fakeCommitHex + "\n", "", 0
+	case strings.Contains(command, "show-ref"):
+		return "", "branch not found", 1
+	default:
+		return "", "", 0
+	}
+}
+
+func testSSHOptions(port int) SourceInstallOptions {
+	return SourceInstallOptions{
+		SSHOptions: SSHOptions{
+			Host:            "127.0.0.1",
+			Port:            port,
+			User:            "root",
+			Password:        fakeSSHPassword,
+			InsecureHostKey: true,
+		},
+	}
+}
+
+func TestSourceInstallSSHFlow(t *testing.T) {
+	srv := startFakeSSHServer(t, nil)
+	res, err := SourceInstall(testSSHOptions(srv.Port()))
+	if err != nil {
+		t.Fatal(err)
+	}
+
+	if res.Detection.Distro != sshinstall.DistroUbuntu || res.Detection.PackageManager != sshinstall.PkgApt {
+		t.Fatalf("detection = %+v", res.Detection)
+	}
+	if res.Detection.InitSystem != sshinstall.InitSystemd {
+		t.Fatalf("init detection = %q, want systemd", res.Detection.InitSystem)
+	}
+	if res.Plan.Toolchain.Arch != "linux-amd64" || res.Plan.Toolchain.Version != "1.26.0" {
+		t.Fatalf("toolchain = %+v", res.Plan.Toolchain)
+	}
+	if len(res.Plan.Packages) == 0 || res.Plan.Repo == "" {
+		t.Fatalf("plan = %+v", res.Plan)
+	}
+	if res.ResolvedBranch != "master" || res.ResolvedCommit != fakeCommitHex {
+		t.Fatalf("resolved = %s @ %s", res.ResolvedBranch, res.ResolvedCommit)
+	}
+	if res.ToolchainDir != "/usr/local/go" || res.StageBinary != "/opt/rsmon-worker-src/rsmon-worker" ||
+		res.RecordFile != "/opt/rsmon-worker-src/rsmon-worker.commit" {
+		t.Fatalf("paths = %+v", res)
+	}
+
+	commands := srv.Commands()
+	var joined strings.Builder
+	for _, c := range commands {
+		joined.WriteString(c)
+		joined.WriteString("\n")
+	}
+	// Marker substrings that survive the nested `sh -c '<script>'`
+	// quoting; exact quoting of each script is asserted by the unit
+	// tests (TestPackageScript, TestToolchainScript, ...).
+	for _, want := range []string{
+		"cat /etc/os-release",
+		"uname -m",
+		"apt-get update",
+		"apt-get install -y --no-install-recommends",
+		"sha256sum -c -",
+		"git clone",
+		"git -C",
+		"fetch --prune origin",
+		"symbolic-ref --short refs/remotes/origin/HEAD",
+		"checkout -q -B",
+		"rev-parse HEAD",
+		"branch=%s\\ncommit=%s\\n",
+		fakeCommitHex,
+		"CGO_ENABLED=0",
+		"build -trimpath",
+		"GOMODCACHE",
+		"mv -f",
+	} {
+		if !strings.Contains(joined.String(), want) {
+			t.Fatalf("recorded commands missing %q:\n%s", want, joined.String())
+		}
+	}
+
+	// Ordering: prerequisites before toolchain before source before build.
+	idx := func(sub string) int {
+		for i, c := range commands {
+			if strings.Contains(c, sub) {
+				return i
+			}
+		}
+		t.Fatalf("command %q not found in %v", sub, commands)
+		return -1
+	}
+	if !(idx("apt-get install") < idx("sha256sum") && idx("sha256sum") < idx("git clone") &&
+		idx("git clone") < idx("rev-parse") && idx("rev-parse") < idx("-trimpath") &&
+		idx("-trimpath") < idx("branch=%s")) {
+		t.Fatalf("step order wrong: %v", commands)
+	}
+
+	// Adaptive resolution means no pinned-branch existence check ran.
+	if strings.Contains(joined.String(), "show-ref") {
+		t.Fatalf("show-ref ran despite branch resolution:\n%s", joined.String())
+	}
+	if strings.Contains(joined.String(), fakeSSHPassword) {
+		t.Fatal("SSH password leaked into a remote command")
+	}
+}
+
+func TestSourceInstallSSHRejectsMissingPinnedBranch(t *testing.T) {
+	srv := startFakeSSHServer(t, nil)
+	opts := testSSHOptions(srv.Port())
+	opts.Branch = "main"
+	_, err := SourceInstall(opts)
+	if err == nil || !strings.Contains(err.Error(), `branch "main" does not exist`) {
+		t.Fatalf("err = %v, want missing-branch error", err)
+	}
+	if commands := srv.Commands(); !strings.Contains(strings.Join(commands, "\n"), "show-ref") {
+		t.Fatalf("pinned branch existence was not verified: %v", commands)
+	}
+}
+
+func TestSourceInstallSSHBuildFailure(t *testing.T) {
+	srv := startFakeSSHServer(t, func(command string) (string, string, int) {
+		if strings.Contains(command, "-trimpath") {
+			return "", "build exploded", 1
+		}
+		return defaultFakeExec(command)
+	})
+	_, err := SourceInstall(testSSHOptions(srv.Port()))
+	if err == nil || !strings.Contains(err.Error(), "build worker binary") || !strings.Contains(err.Error(), "build exploded") {
+		t.Fatalf("err = %v, want bounded build failure", err)
+	}
+}
+
+func TestSourceInstallSSHDetectionFailure(t *testing.T) {
+	srv := startFakeSSHServer(t, func(command string) (string, string, int) {
+		if strings.Contains(command, "os-release") {
+			return "", "os-release unreadable", 1
+		}
+		return defaultFakeExec(command)
+	})
+	_, err := SourceInstall(testSSHOptions(srv.Port()))
+	if err == nil || !strings.Contains(err.Error(), "/etc/os-release") {
+		t.Fatalf("err = %v, want detection failure", err)
+	}
+}
+
+// TestSourceInstallSSHCheckoutFailureNotMasked proves the fail-closed
+// contract: a failed checkout (e.g. a dirty working tree) surfaces as an
+// error and never reaches the build or commit-record steps, so the
+// previous staging binary and record are preserved.
+func TestSourceInstallSSHCheckoutFailureNotMasked(t *testing.T) {
+	srv := startFakeSSHServer(t, func(command string) (string, string, int) {
+		if strings.Contains(command, "checkout -q -B") {
+			return "", "your local changes to the following files would be overwritten by checkout", 1
+		}
+		return defaultFakeExec(command)
+	})
+	_, err := SourceInstall(testSSHOptions(srv.Port()))
+	if err == nil || !strings.Contains(err.Error(), "check out branch") {
+		t.Fatalf("err = %v, want checkout failure", err)
+	}
+	joined := strings.Join(srv.Commands(), "\n")
+	if strings.Contains(joined, "-trimpath") || strings.Contains(joined, "branch=%s") {
+		t.Fatalf("build or record ran after checkout failed:\n%s", joined)
+	}
+}
+
+// TestSourceInstallSSHCommandTimeout verifies each remote command is
+// bounded by SessionTimeout and the run reports it.
+func TestSourceInstallSSHCommandTimeout(t *testing.T) {
+	srv := startFakeSSHServer(t, func(command string) (string, string, int) {
+		if strings.Contains(command, "uname -m") {
+			time.Sleep(5 * time.Second)
+			return "x86_64\n", "", 0
+		}
+		return defaultFakeExec(command)
+	})
+	opts := testSSHOptions(srv.Port())
+	opts.SessionTimeout = 300 * time.Millisecond
+	_, err := SourceInstall(opts)
+	if err == nil || !strings.Contains(err.Error(), "timed out after") {
+		t.Fatalf("err = %v, want command timeout", err)
+	}
+}

internal/installer/sourceinstall_test.go

@@ -0,0 +1,395 @@
+package installer
+
+import (
+	"strings"
+	"testing"
+	"time"
+
+	"rocketgit.ru/rsmon/worker/internal/sshinstall"
+)
+
+// cannedSHA is a fixed 64-hex value used to exercise script rendering.
+const cannedSHA = "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"
+
+func TestPackageScript(t *testing.T) {
+	pkgs := []string{"git", "ca-certificates", "curl", "tar", "gzip"}
+
+	apk := packageScript(sshinstall.PkgApk, pkgs)
+	if !strings.HasPrefix(apk, "apk add --no-cache ") {
+		t.Fatalf("apk script = %q", apk)
+	}
+	for _, p := range pkgs {
+		if !strings.Contains(apk, shellQuote(p)) {
+			t.Fatalf("apk script missing quoted package %q: %q", p, apk)
+		}
+	}
+
+	apt := packageScript(sshinstall.PkgApt, pkgs)
+	for _, want := range []string{"export DEBIAN_FRONTEND=noninteractive", "apt-get update", "apt-get install -y --no-install-recommends"} {
+		if !strings.Contains(apt, want) {
+			t.Fatalf("apt script missing %q: %q", want, apt)
+		}
+	}
+
+	pacman := packageScript(sshinstall.PkgPacman, pkgs)
+	if !strings.Contains(pacman, "pacman -Sy --noconfirm --needed") {
+		t.Fatalf("pacman script = %q", pacman)
+	}
+
+	dnf := packageScript(sshinstall.PkgDnf, pkgs)
+	if !strings.Contains(dnf, "dnf install -y") {
+		t.Fatalf("dnf script = %q", dnf)
+	}
+
+	if got := packageScript(sshinstall.PkgUnknown, pkgs); got != "" {
+		t.Fatalf("unknown pkg script = %q, want empty", got)
+	}
+}
+
+func TestPackageScriptNeverIncludesCompiler(t *testing.T) {
+	pkgs := []string{"git", "ca-certificates", "curl", "tar", "gzip"}
+	for _, pkg := range []sshinstall.PackageManager{sshinstall.PkgApk, sshinstall.PkgApt, sshinstall.PkgPacman, sshinstall.PkgDnf} {
+		script := packageScript(pkg, pkgs)
+		for _, bad := range []string{"build-essential", "gcc", "g++", "base-devel", "make", "gcc-c++"} {
+			if strings.Contains(script, bad) {
+				t.Fatalf("script for %s includes compiler hint %q: %q", pkg, bad, script)
+			}
+		}
+	}
+}
+
+func TestToolchainScript(t *testing.T) {
+	tc := sshinstall.Toolchain{
+		Version: "1.26.0",
+		Arch:    "linux-amd64",
+		URL:     "https://go.dev/dl/go1.26.0.linux-amd64.tar.gz",
+		SHA256:  cannedSHA,
+	}
+	script := toolchainScript(tc, "/usr/local/go")
+	for _, want := range []string{
+		"set -eu",
+		"mktemp -d /tmp/rsmon-toolchain-XXXXXX",
+		"mktemp -d \"$parent/.go-staging-XXXXXX\"",
+		"trap 'rm -rf \"$work\" \"$staging\"' EXIT HUP INT TERM",
+		"curl -fsSL --retry 3 --retry-delay 2 -o \"$archive\" 'https://go.dev/dl/go1.26.0.linux-amd64.tar.gz'",
+		"sha256sum -c -",
+		cannedSHA,
+		"tar -C \"$staging\" -xzf \"$archive\"",
+		"staged=\"$($staging/go/bin/go version | awk '{print $3}')\"",
+		"backup=\"$parent/.go-backup\"",
+		"mv \"$toolchain\" \"$backup\"",
+		"mv \"$staging/go\" \"$toolchain\"",
+		"\"$toolchain/bin/go\" version",
+		"go toolchain already present",
+	} {
+		if !strings.Contains(script, want) {
+			t.Fatalf("toolchain script missing %q:\n%s", want, script)
+		}
+	}
+	if !strings.Contains(script, shellQuote("go1.26.0")) {
+		t.Fatalf("toolchain script missing version guard:\n%s", script)
+	}
+}
+
+func TestToolchainScriptIdempotentSkipOnlyForMatchingVersion(t *testing.T) {
+	script := toolchainScript(sshinstall.Toolchain{Version: "1.26.0", Arch: "linux-amd64", URL: "u", SHA256: cannedSHA}, "/usr/local/go")
+	if strings.Count(script, "exit 0") != 1 {
+		t.Fatalf("toolchain script should skip only once:\n%s", script)
+	}
+	// Replacement must be atomic: the prior toolchain is moved aside and
+	// restored when the swap fails, never removed before staging is ready.
+	for _, want := range []string{
+		"if [ -e \"$toolchain\" ]; then",
+		"mv \"$toolchain\" \"$backup\"",
+		"if ! mv \"$staging/go\" \"$toolchain\"; then",
+		"mv \"$backup\" \"$toolchain\"",
+	} {
+		if !strings.Contains(script, want) {
+			t.Fatalf("toolchain script missing %q:\n%s", want, script)
+		}
+	}
+	if strings.Contains(script, "rm -rf \"$toolchain\"") {
+		t.Fatalf("toolchain script must not delete the live toolchain directly:\n%s", script)
+	}
+}
+
+func TestCloneUpdateScript(t *testing.T) {
+	script := cloneUpdateScript("https://example.test/worker.git", "/opt/rsmon-worker-src")
+	for _, want := range []string{
+		"set -u",
+		"[ ! -d \"$dir/.git\" ]",
+		"git clone \"$repo\" \"$dir\"",
+		"while [ \"$attempt\" -lt 3 ]",
+		"sleep 2",
+		"git -C \"$dir\" config --get remote.origin.url",
+		"existing checkout origin does not match configured repository",
+		"git -C \"$dir\" fetch --prune origin",
+		"exit 1",
+	} {
+		if !strings.Contains(script, want) {
+			t.Fatalf("clone/update script missing %q:\n%s", want, script)
+		}
+	}
+}
+
+func TestCheckoutScriptFailsClosed(t *testing.T) {
+	script := checkoutScript("/opt/rsmon-worker-src", "master")
+	if !strings.HasPrefix(script, "set -eu\n") {
+		t.Fatalf("checkout script must fail closed with set -eu:\n%s", script)
+	}
+	for _, want := range []string{
+		"git -C '/opt/rsmon-worker-src' diff --quiet ||",
+		"git -C '/opt/rsmon-worker-src' diff --cached --quiet ||",
+		"refusing to overwrite",
+		"checkout -q -B 'master' 'origin/master'",
+		"rev-parse HEAD",
+	} {
+		if !strings.Contains(script, want) {
+			t.Fatalf("checkout script missing %q:\n%s", want, script)
+		}
+	}
+}
+
+func TestResolveBranchScriptFailsClosed(t *testing.T) {
+	if !strings.HasPrefix(resolveBranchScript("/opt/rsmon-worker-src"), "set -eu\n") {
+		t.Fatalf("resolve-branch script must fail closed:\n%s", resolveBranchScript("/opt/rsmon-worker-src"))
+	}
+}
+
+func TestResolveBranchScript(t *testing.T) {
+	script := resolveBranchScript("/opt/rsmon-worker-src")
+	for _, want := range []string{
+		"remote set-head origin --auto",
+		"symbolic-ref --short refs/remotes/origin/HEAD",
+	} {
+		if !strings.Contains(script, want) {
+			t.Fatalf("resolve-branch script missing %q:\n%s", want, script)
+		}
+	}
+}
+
+func TestCheckoutScript(t *testing.T) {
+	script := checkoutScript("/opt/rsmon-worker-src", "master")
+	for _, want := range []string{
+		"checkout -q -B 'master' 'origin/master'",
+		"rev-parse HEAD",
+	} {
+		if !strings.Contains(script, want) {
+			t.Fatalf("checkout script missing %q:\n%s", want, script)
+		}
+	}
+}
+
+func TestRefExistsScript(t *testing.T) {
+	script := refExistsScript("/opt/rsmon-worker-src", "refs/remotes/origin/main")
+	if !strings.Contains(script, "show-ref --verify --quiet 'refs/remotes/origin/main'") {
+		t.Fatalf("ref-exists script = %q", script)
+	}
+}
+
+func TestCommitRecordScript(t *testing.T) {
+	script := commitRecordScript("/opt/rsmon-worker-src", "master", strings.Repeat("a", 40))
+	for _, want := range []string{
+		"branch=%s\\ncommit=%s\\n",
+		"'master'",
+		strings.Repeat("a", 40),
+		"'/opt/rsmon-worker-src/rsmon-worker.commit'",
+		"chmod 0644",
+	} {
+		if !strings.Contains(script, want) {
+			t.Fatalf("record script missing %q:\n%s", want, script)
+		}
+	}
+}
+
+func TestBuildScript(t *testing.T) {
+	script := buildScript("/usr/local/go", "/opt/rsmon-worker-src", "", "/opt/rsmon-worker-src/rsmon-worker",
+		`-s -w -X main.version=dev -X main.commit=abcdef012345 -X main.buildDate=2026-08-12T00:00:00Z`)
+	for _, want := range []string{
+		"set -eu",
+		"cd '/opt/rsmon-worker-src'",
+		"export PATH='/usr/local/go/bin':$PATH",
+		"export GOCACHE='/opt/rsmon-worker-src/.gocache'",
+		"export GOMODCACHE='/opt/rsmon-worker-src/.gomodcache'",
+		"CGO_ENABLED=0 '/usr/local/go/bin/go' build -trimpath",
+		"-X main.commit=abcdef012345",
+		"-o \"$tmp\" ./cmd/rsmon-worker",
+		"tmp=\"$stage.new\"",
+		"\"$tmp\" --version",
+		"mv -f \"$tmp\" \"$stage\"",
+		"trap 'rm -f \"$tmp\"' EXIT HUP INT TERM",
+	} {
+		if !strings.Contains(script, want) {
+			t.Fatalf("build script missing %q:\n%s", want, script)
+		}
+	}
+	if strings.Contains(script, "GOPROXY") {
+		t.Fatalf("empty GOPROXY must not be exported:\n%s", script)
+	}
+
+	withProxy := buildScript("/usr/local/go", "/opt/rsmon-worker-src", "https://proxy.golang.org,direct", "/opt/rsmon-worker-src/rsmon-worker", "-s -w")
+	if !strings.Contains(withProxy, "export GOPROXY='https://proxy.golang.org,direct'") {
+		t.Fatalf("GOPROXY override not rendered:\n%s", withProxy)
+	}
+}
+
+func TestBuildScriptVerifiesBeforeSwap(t *testing.T) {
+	script := buildScript("/usr/local/go", "/opt/rsmon-worker-src", "", "/opt/rsmon-worker-src/rsmon-worker", "-s -w")
+	verify := strings.Index(script, "\"$tmp\" --version")
+	swap := strings.Index(script, "mv -f \"$tmp\" \"$stage\"")
+	if verify < 0 || swap < 0 || verify > swap {
+		t.Fatalf("build script must verify the temp binary before swapping it in:\n%s", script)
+	}
+}
+
+func TestParseResolvedCommit(t *testing.T) {
+	commit := strings.Repeat("abcdef", 6) + "abcd" // 40 hex
+	if got, err := parseResolvedCommit(commit + "\n"); err != nil || got != commit {
+		t.Fatalf("parseResolvedCommit() = %q, %v", got, err)
+	}
+	if got, err := parseResolvedCommit("ignored\n" + commit + "\n"); err != nil || got != commit {
+		t.Fatalf("parseResolvedCommit() multi-line = %q, %v", got, err)
+	}
+	for _, bad := range []string{"", "abc", strings.Repeat("A", 40), strings.Repeat("a", 39), "x" + strings.Repeat("a", 39)} {
+		if _, err := parseResolvedCommit(bad); err == nil {
+			t.Fatalf("parseResolvedCommit(%q) succeeded", bad)
+		}
+	}
+}
+
+func TestParseResolvedBranch(t *testing.T) {
+	if got, err := parseResolvedBranch("origin/master\n"); err != nil || got != "master" {
+		t.Fatalf("parseResolvedBranch(origin/master) = %q, %v", got, err)
+	}
+	if got, err := parseResolvedBranch("master\n"); err != nil || got != "master" {
+		t.Fatalf("parseResolvedBranch(master) = %q, %v", got, err)
+	}
+	// A multi-component short name is legal git and stays safe because
+	// the value is validated and single-quoted everywhere it is used.
+	if got, err := parseResolvedBranch("origin/release/1.0\n"); err != nil || got != "release/1.0" {
+		t.Fatalf("parseResolvedBranch(nested) = %q, %v", got, err)
+	}
+	for _, bad := range []string{"origin/../evil\n", "origin/x y\n", "origin/x..y\n", "origin/x@{y\n", "origin/-x\n"} {
+		if _, err := parseResolvedBranch(bad); err == nil {
+			t.Fatalf("parseResolvedBranch(%q) succeeded", bad)
+		}
+	}
+}
+
+func TestValidBranchName(t *testing.T) {
+	for _, ok := range []string{"main", "master", "release-1.0", "feature/x", "a", "v1.2.3", "a_b", "release/1.0"} {
+		if !validBranchName(ok) {
+			t.Fatalf("validBranchName(%q) rejected", ok)
+		}
+	}
+	for _, bad := range []string{"", "-bad", "x..y", "x@{y", "x y", "/x", "x.", "x/", "x//y", "x\\y", "x;y", "$x", "`x`"} {
+		if validBranchName(bad) {
+			t.Fatalf("validBranchName(%q) accepted", bad)
+		}
+	}
+}
+
+func TestQuoteList(t *testing.T) {
+	if got, want := quoteList([]string{"git", "ca-certificates"}), "'git' 'ca-certificates'"; got != want {
+		t.Fatalf("quoteList() = %q, want %q", got, want)
+	}
+	if got := quoteList(nil); got != "" {
+		t.Fatalf("quoteList(nil) = %q, want empty", got)
+	}
+}
+
+func TestNormalizeSourceOptions(t *testing.T) {
+	o, err := normalizeSourceOptions(SourceInstallOptions{SSHOptions: SSHOptions{Host: "h", User: "u"}})
+	if err != nil {
+		t.Fatal(err)
+	}
+	if o.Port != 22 || o.ToolchainDir != "/usr/local/go" || o.SessionTimeout != defaultSessionTimeout {
+		t.Fatalf("defaults not applied: %+v", o)
+	}
+	if o, err := normalizeSourceOptions(SourceInstallOptions{SSHOptions: SSHOptions{Host: "h", User: "u"}, SessionTimeout: 7 * time.Minute}); err != nil || o.SessionTimeout != 7*time.Minute {
+		t.Fatalf("explicit session timeout not honored: %+v, %v", o, err)
+	}
+
+	for _, tc := range []struct {
+		name string
+		opts SourceInstallOptions
+	}{
+		{name: "missing host", opts: SourceInstallOptions{SSHOptions: SSHOptions{User: "u"}}},
+		{name: "missing user", opts: SourceInstallOptions{SSHOptions: SSHOptions{Host: "h"}}},
+		{name: "bad port", opts: SourceInstallOptions{SSHOptions: SSHOptions{Host: "h", User: "u", Port: 70000}}},
+		{name: "bad branch", opts: SourceInstallOptions{SSHOptions: SSHOptions{Host: "h", User: "u"}, Branch: "x y"}},
+		{name: "bad go version", opts: SourceInstallOptions{SSHOptions: SSHOptions{Host: "h", User: "u"}, GoVersion: "1.26;rm"}},
+		{name: "bad go arch", opts: SourceInstallOptions{SSHOptions: SSHOptions{Host: "h", User: "u"}, GoArch: "amd64;rm"}},
+		{name: "bad repo scheme", opts: SourceInstallOptions{SSHOptions: SSHOptions{Host: "h", User: "u"}, Repo: "http://x/y"}},
+		{name: "repo userinfo", opts: SourceInstallOptions{SSHOptions: SSHOptions{Host: "h", User: "u"}, Repo: "https://user:pass@x/y"}},
+		{name: "relative toolchain", opts: SourceInstallOptions{SSHOptions: SSHOptions{Host: "h", User: "u"}, ToolchainDir: "usr/local/go"}},
+		{name: "non-go toolchain basename", opts: SourceInstallOptions{SSHOptions: SSHOptions{Host: "h", User: "u"}, ToolchainDir: "/opt/golang"}},
+		{name: "relative stage", opts: SourceInstallOptions{SSHOptions: SSHOptions{Host: "h", User: "u"}, StageBinary: "bin/worker"}},
+	} {
+		t.Run(tc.name, func(t *testing.T) {
+			if _, err := normalizeSourceOptions(tc.opts); err == nil {
+				t.Fatalf("normalizeSourceOptions(%s) succeeded", tc.name)
+			}
+		})
+	}
+}
+
+func TestSudoWrap(t *testing.T) {
+	cmd, stdin := sudoWrap("root", "", "echo hi")
+	if cmd != "echo hi" || stdin != nil {
+		t.Fatalf("root wrap = %q, %q", cmd, stdin)
+	}
+
+	cmd, stdin = sudoWrap("deploy", "", "echo hi")
+	if cmd != "sudo -n -- echo hi" || stdin != nil {
+		t.Fatalf("passwordless sudo wrap = %q, %q", cmd, stdin)
+	}
+
+	cmd, stdin = sudoWrap("deploy", "supersecret", "echo hi")
+	if cmd != "sudo -S -p '' -- echo hi" || string(stdin) != "supersecret\n" {
+		t.Fatalf("sudo -S wrap = %q, %q", cmd, stdin)
+	}
+	if strings.Contains(cmd, "supersecret") {
+		t.Fatal("sudo password leaked into the command string")
+	}
+}
+
+// TestSourceScriptsNeverContainSecrets documents the "secrets absent"
+// contract: none of the rendered remote scripts carry a credential.
+func TestBoundedBuffer(t *testing.T) {
+	var b boundedBuffer
+	b.max = 8
+	if _, err := b.Write([]byte("12345")); err != nil {
+		t.Fatal(err)
+	}
+	if b.truncated {
+		t.Fatal("truncated before exceeding max")
+	}
+	if _, err := b.Write([]byte("6789abcdef")); err != nil {
+		t.Fatal(err)
+	}
+	if !b.truncated {
+		t.Fatal("overflow not flagged")
+	}
+	if got, want := b.String(), "12345678"; got != want {
+		t.Fatalf("boundedBuffer = %q, want %q", got, want)
+	}
+}
+
+func TestSourceScriptsNeverContainSecrets(t *testing.T) {
+	const secret = "super-secret-token-value"
+	scripts := []string{
+		packageScript(sshinstall.PkgApk, []string{"git", "ca-certificates", "curl", "tar", "gzip"}),
+		toolchainScript(sshinstall.Toolchain{Version: "1.26.0", Arch: "linux-amd64", URL: "https://go.dev/dl/go1.26.0.linux-amd64.tar.gz", SHA256: cannedSHA}, "/usr/local/go"),
+		cloneUpdateScript("https://example.test/worker.git", "/opt/rsmon-worker-src"),
+		resolveBranchScript("/opt/rsmon-worker-src"),
+		checkoutScript("/opt/rsmon-worker-src", "master"),
+		commitRecordScript("/opt/rsmon-worker-src", "master", strings.Repeat("a", 40)),
+		buildScript("/usr/local/go", "/opt/rsmon-worker-src", "", "/opt/rsmon-worker-src/rsmon-worker", "-s -w"),
+	}
+	for i, script := range scripts {
+		if strings.Contains(script, secret) {
+			t.Fatalf("script %d contains a secret", i)
+		}
+	}
+}

internal/sshinstall/plan.go

@@ -3,6 +3,7 @@ package sshinstall
 import (
 	"fmt"
 	"net/url"
+	"regexp"
 	"strings"
 )
 
@@ -15,9 +16,25 @@ const DefaultGoVersion = "1.26.0"
 // source credential and is the plan's default clone URL.
 const DefaultRepo = "https://rocketgit.ru/rsmon/worker.git"
 
-// DefaultBranch is the branch the source installer checks out and
+var (
-// builds.
+	// goVersionPattern bounds Go toolchain version strings that are
-const DefaultBranch = "main"
+	// interpolated into remote shell commands and download URLs.
+	goVersionPattern = regexp.MustCompile(`^[0-9][0-9A-Za-z._-]*$`)
+	// goArchPattern bounds Go download archive suffixes (e.g. "amd64")
+	// that are interpolated into remote shell commands and URLs.
+	goArchPattern = regexp.MustCompile(`^[0-9A-Za-z][0-9A-Za-z_-]*$`)
+)
+
+// ValidGoVersion reports whether a Go toolchain version uses only safe
+// characters (digits, letters, dots, dashes, underscores) and starts
+// with a digit. Versions are embedded in remote shell commands and
+// download URLs, so the charset is the injection boundary.
+func ValidGoVersion(v string) bool { return goVersionPattern.MatchString(v) }
+
+// ValidGoArch reports whether a Go download archive suffix uses only
+// safe characters. Suffixes are embedded in remote shell commands and
+// download URLs, so the charset is the injection boundary.
+func ValidGoArch(a string) bool { return goArchPattern.MatchString(a) }
 
 // Toolchain is a pinned, checksum-verified Go toolchain download for a
 // remote Linux architecture. The SHA-256 is baked for the default
@@ -117,7 +134,7 @@ func ToolchainFor(goarch, version string) (Toolchain, error) {
 // back to the pinned defaults.
 type SourceOptions struct {
 	Repo          string // clone URL; default DefaultRepo
-	Branch        string // default DefaultBranch
+	Branch        string // branch to build; empty means "the remote default branch"
 	GoVersion     string // default DefaultGoVersion
 	GoArch        string // go archive suffix; when empty, derived from UnameM
 	UnameM        string // remote `uname -m` output; required unless GoArch set
@@ -147,6 +164,9 @@ func PlanSource(d Detection, opts SourceOptions) (SourcePlan, error) {
 		return SourcePlan{}, fmt.Errorf("unsupported distro %q: no package manager", d.ID)
 	}
 	goarch := strings.TrimSpace(opts.GoArch)
+	if goarch != "" && !ValidGoArch(goarch) {
+		return SourcePlan{}, fmt.Errorf("invalid Go architecture %q: only letters, digits, dashes, and underscores are allowed", goarch)
+	}
 	if goarch == "" {
 		var err error
 		goarch, err = GoArch(opts.UnameM)
@@ -154,6 +174,9 @@ func PlanSource(d Detection, opts SourceOptions) (SourcePlan, error) {
 			return SourcePlan{}, err
 		}
 	}
+	if version := strings.TrimSpace(opts.GoVersion); version != "" && !ValidGoVersion(version) {
+		return SourcePlan{}, fmt.Errorf("invalid Go version %q: only digits, letters, dots, dashes, and underscores are allowed", version)
+	}
 	toolchain, err := ToolchainFor(goarch, opts.GoVersion)
 	if err != nil {
 		return SourcePlan{}, err
@@ -166,9 +189,10 @@ func PlanSource(d Detection, opts SourceOptions) (SourcePlan, error) {
 		return SourcePlan{}, err
 	}
 	branch := strings.TrimSpace(opts.Branch)
-	if branch == "" {
+	// An empty branch means "build the remote's default branch" (the
-		branch = DefaultBranch
+	// public repo currently publishes master). The executor resolves and
-	}
+	// records the remote default; a non-empty branch is pinned and must
+	// exist on the remote.
 	buildDir := strings.TrimSpace(opts.BuildDir)
 	if buildDir == "" {
 		buildDir = "/opt/rsmon-worker-src"
@@ -206,9 +230,19 @@ func packagePrereqs(pkg PackageManager) []string {
 	}
 }
 
-// validateRepoURL rejects repository references that could smuggle a
+// ValidateRepoURL rejects repository references that could smuggle a
-// command or a non-remote scheme into the clone step. Only http(s) and
+// command or a non-remote scheme into the clone step. Only https is
-// the git protocol are accepted; the default repository is https.
+// accepted (the default repository is https), and userinfo such as
+// `user:pass@host` is rejected so credentials can never reach the remote
+// clone command or the clone's config. An empty value is accepted here
+// (it falls back to the default repository when planning).
+func ValidateRepoURL(repo string) error {
+	if repo == "" {
+		return nil
+	}
+	return validateRepoURL(repo)
+}
+
 func validateRepoURL(repo string) error {
 	if strings.ContainsAny(repo, "\r\n\t ") {
 		return fmt.Errorf("repository URL %q contains whitespace", repo)
@@ -217,12 +251,13 @@ func validateRepoURL(repo string) error {
 	if err != nil || u.Host == "" {
 		return fmt.Errorf("repository URL %q is not an absolute clone URL", repo)
 	}
-	switch u.Scheme {
+	if u.User != nil {
-	case "https", "http", "git":
+		return fmt.Errorf("repository URL %q must not contain userinfo", repo)
-		return nil
-	default:
-		return fmt.Errorf("repository URL %q uses unsupported scheme %q", repo, u.Scheme)
 	}
+	if u.Scheme != "https" {
+		return fmt.Errorf("repository URL %q must use the https scheme", repo)
+	}
+	return nil
 }
 
 // StepKind identifies one ordered remote step the executor will run.
@@ -248,11 +283,15 @@ type Step struct {
 // Steps returns the ordered source-install plan as stable, reviewable
 // steps. It is the contract the executor work package implements.
 func (p SourcePlan) Steps() []Step {
+	checkoutDetail := "check out branch " + p.Branch + " and record the resolved commit"
+	if p.Branch == "" {
+		checkoutDetail = "check out the remote default branch and record the resolved commit"
+	}
 	return []Step{
 		{Kind: StepInstallPackages, Detail: "install minimal build prerequisites", Packages: p.Packages},
 		{Kind: StepInstallToolchain, Detail: "install pinned Go " + p.Toolchain.Version + " (" + p.Toolchain.Arch + ") and verify SHA-256"},
 		{Kind: StepCloneSource, Detail: "clone " + p.Repo + " into " + p.BuildDir},
-		{Kind: StepCheckoutBranch, Detail: "check out branch " + p.Branch + " and record the resolved commit"},
+		{Kind: StepCheckoutBranch, Detail: checkoutDetail},
 		{Kind: StepBuildWorker, Detail: "build the worker binary with CGO_ENABLED=0 and trimpath"},
 		{Kind: StepInstallService, Detail: "atomically install the binary, env, data dir, and " + string(p.InitSystem) + " service definition"},
 	}

internal/sshinstall/plan_test.go

@@ -127,7 +127,7 @@ func TestPlanSourceAlpine(t *testing.T) {
 	if err != nil {
 		t.Fatal(err)
 	}
-	if p.Repo != DefaultRepo || p.Branch != DefaultBranch {
+	if p.Repo != DefaultRepo || p.Branch != "" {
 		t.Fatalf("plan defaults wrong: %+v", p)
 	}
 	if p.Toolchain.Arch != "linux-amd64" {
@@ -230,14 +230,45 @@ func TestPackagePrereqsNeverIncludeCompiler(t *testing.T) {
 }
 
 func TestValidateRepoURLSchemes(t *testing.T) {
-	for _, ok := range []string{"https://rocketgit.ru/rsmon/worker.git", "http://x/y", "git://example.test/r"} {
+	for _, ok := range []string{"https://rocketgit.ru/rsmon/worker.git", "https://example.test/r"} {
 		if err := validateRepoURL(ok); err != nil {
 			t.Fatalf("validateRepoURL(%q): %v", ok, err)
 		}
 	}
-	for _, bad := range []string{"ssh://h@x/r", "s3://bucket/key", "x y", ""} {
+	for _, bad := range []string{
+		"ssh://h@x/r", "s3://bucket/key", "x y", "", "http://x/y", "git://example.test/r",
+		"https://user:pass@example.test/r", "https://token@example.test/r", "file:///tmp/r",
+	} {
 		if err := validateRepoURL(bad); err == nil {
 			t.Fatalf("validateRepoURL(%q) succeeded", bad)
 		}
 	}
 }
+
+func TestPlanSourceRejectsUnsafeCharset(t *testing.T) {
+	ubuntu := Detect("ID=ubuntu\n", nil)
+	for _, goarch := range []string{"amd64;rm", "x;rm -rf", "$(id)", "..", "a b"} {
+		if _, err := PlanSource(ubuntu, SourceOptions{UnameM: "x86_64", GoArch: goarch}); err == nil {
+			t.Fatalf("unsafe GoArch %q planned", goarch)
+		}
+	}
+	for _, version := range []string{"1.26;rm", "$(id)", "1.26.0 x", "a/b"} {
+		if _, err := PlanSource(ubuntu, SourceOptions{UnameM: "x86_64", GoVersion: version}); err == nil {
+			t.Fatalf("unsafe GoVersion %q planned", version)
+		}
+	}
+	if !ValidGoVersion("1.26.0") || !ValidGoArch("amd64") {
+		t.Fatal("valid version/arch rejected")
+	}
+}
+
+func TestPlanSourceEmptyBranchSteps(t *testing.T) {
+	ubuntu := Detect("ID=ubuntu\n", nil)
+	p, err := PlanSource(ubuntu, SourceOptions{UnameM: "x86_64"})
+	if err != nil {
+		t.Fatal(err)
+	}
+	if !strings.Contains(p.Steps()[3].Detail, "remote default branch") {
+		t.Fatalf("checkout step detail for empty branch = %q", p.Steps()[3].Detail)
+	}
+}