Fix usage of example (e.g. vs Ex) abbreviations (#4136)

webapp/i18n/en.json

@@ -148,10 +148,10 @@
   "admin.cluster.enableDescription": "When true, Mattermost will run in High Availability mode. Please see <a href=\"http://docs.mattermost.com/deployment/cluster.html\" target=\"_blank\">documentation</a> to learn more about configuring High Availability for Mattermost.",
   "admin.cluster.enableTitle": "Enable High Availability Mode:",
   "admin.cluster.interNodeListenAddressDesc": "The address the server will listen on for communicating with other servers.",
-  "admin.cluster.interNodeListenAddressEx": "Ex \":8075\"",
+  "admin.cluster.interNodeListenAddressEx": "E.g.: \":8075\"",
   "admin.cluster.interNodeListenAddressTitle": "Inter-Node Listen Address:",
   "admin.cluster.interNodeUrlsDesc": "The internal/private URLs of all the Mattermost servers separated by commas.",
-  "admin.cluster.interNodeUrlsEx": "Ex \"http://10.10.10.30, http://10.10.10.31\"",
+  "admin.cluster.interNodeUrlsEx": "E.g.: \"http://10.10.10.30, http://10.10.10.31\"",
   "admin.cluster.interNodeUrlsTitle": "Inter-Node URLs:",
   "admin.cluster.loadedFrom": "This configuration file was loaded from Node ID {clusterId}. Please see the Troubleshooting Guide in our <a href=\"http://docs.mattermost.com/deployment/cluster.html\" target=\"_blank\">documentation</a> if you are accessing the System Console through a load balancer and experiencing issues.",
   "admin.cluster.noteDescription": "Changing properties in this section will require a server restart before taking effect. When High Availability mode is enabled, the System Console is set to read-only and can only be changed from the configuration file.",
@@ -164,7 +164,7 @@
   "admin.cluster.status_table.url": "Inter-Node URL",
   "admin.cluster.status_table.version": "Version",
   "admin.compliance.directoryDescription": "Directory to which compliance reports are written. If blank, will be set to ./data/.",
-  "admin.compliance.directoryExample": "Ex \"./data/\"",
+  "admin.compliance.directoryExample": "E.g.: \"./data/\"",
   "admin.compliance.directoryTitle": "Compliance Report Directory:",
   "admin.compliance.enableDailyDesc": "When true, Mattermost will generate a daily compliance report.",
   "admin.compliance.enableDailyTitle": "Enable Daily Report:",
@@ -244,7 +244,7 @@
   "admin.email.fullPushNotification": "Send full message snippet",
   "admin.email.genericPushNotification": "Send generic description with user and channel names",
   "admin.email.inviteSaltDescription": "32-character salt added to signing of email invites. Randomly generated on install. Click \"Regenerate\" to create new salt.",
-  "admin.email.inviteSaltExample": "Ex \"bjlSR4QqkXFBr7TP4oDzlfZmcNuH9Yo\"",
+  "admin.email.inviteSaltExample": "E.g.: \"bjlSR4QqkXFBr7TP4oDzlfZmcNuH9Yo\"",
   "admin.email.inviteSaltTitle": "Email Invite Salt:",
   "admin.email.mhpns": "Use encrypted, production-quality HPNS connection to iOS and Android apps",
   "admin.email.mhpnsHelp": "Download <a href=\"https://itunes.apple.com/us/app/mattermost/id984966508?mt=8\" target=\"_blank\">Mattermost iOS app</a> from iTunes. Download <a href=\"https://play.google.com/store/apps/details?id=com.mattermost.mattermost&hl=en\" target=\"_blank\">Mattermost Android app</a> from Google Play. Learn more about <a href=\"http://docs.mattermost.com/deployment/push.html#hosted-push-notifications-service-hpns\" target=\"_blank\">HPNS</a>.",
@@ -262,7 +262,7 @@
   "admin.email.notificationsDescription": "Typically set to true in production. When true, Mattermost attempts to send email notifications. Developers may set this field to false to skip email setup for faster development.<br />Setting this to true removes the Preview Mode banner (requires logging out and logging back in after setting is changed).",
   "admin.email.notificationsTitle": "Enable Email Notifications: ",
   "admin.email.passwordSaltDescription": "32-character salt added to signing of password reset emails. Randomly generated on install. Click \"Regenerate\" to create new salt.",
-  "admin.email.passwordSaltExample": "Ex \"bjlSR4QqkXFBr7TP4oDzlfZmcNuH9Yo\"",
+  "admin.email.passwordSaltExample": "E.g.: \"bjlSR4QqkXFBr7TP4oDzlfZmcNuH9Yo\"",
   "admin.email.passwordSaltTitle": "Password Reset Salt:",
   "admin.email.pushContentDesc": "Selecting \"Send generic description with user and channel names\" provides push notifications with generic messages, including names of users and channels but no specific details from the message text.<br /><br />Selecting \"Send full message snippet\" sends excerpts from messages triggering notifications with specifics and may include confidential information sent in messages. If your Push Notification Service is outside your firewall, it is HIGHLY RECOMMENDED this option only be used with an \"https\" protocol to encrypt the connection.",
   "admin.email.pushContentTitle": "Push Notification Contents:",
@@ -319,64 +319,64 @@
   "admin.gitab.clientSecretDescription": "Obtain this value via the instructions above for logging into GitLab.",
   "admin.gitlab.EnableHtmlDesc": "<ol><li>Log in to your GitLab account and go to Profile Settings -> Applications.</li><li>Enter Redirect URIs \"<your-mattermost-url>/login/gitlab/complete\" (example: http://localhost:8065/login/gitlab/complete) and \"<your-mattermost-url>/signup/gitlab/complete\". </li><li>Then use \"Application Secret Key\" and \"Application ID\" fields from GitLab to complete the options below.</li><li>Complete the Endpoint URLs below. </li></ol>",
   "admin.gitlab.authDescription": "Enter https://<your-gitlab-url>/oauth/authorize (example https://example.com:3000/oauth/authorize).   Make sure you use HTTP or HTTPS in your URL depending on your server configuration.",
-  "admin.gitlab.authExample": "Ex \"https://<your-gitlab-url>/oauth/authorize\"",
+  "admin.gitlab.authExample": "E.g.: \"https://<your-gitlab-url>/oauth/authorize\"",
   "admin.gitlab.authTitle": "Auth Endpoint:",
   "admin.gitlab.clientIdDescription": "Obtain this value via the instructions above for logging into GitLab",
-  "admin.gitlab.clientIdExample": "Ex \"jcuS8PuvcpGhpgHhlcpT1Mx42pnqMxQY\"",
+  "admin.gitlab.clientIdExample": "E.g.: \"jcuS8PuvcpGhpgHhlcpT1Mx42pnqMxQY\"",
   "admin.gitlab.clientIdTitle": "Application ID:",
-  "admin.gitlab.clientSecretExample": "Ex \"jcuS8PuvcpGhpgHhlcpT1Mx42pnqMxQY\"",
+  "admin.gitlab.clientSecretExample": "E.g.: \"jcuS8PuvcpGhpgHhlcpT1Mx42pnqMxQY\"",
   "admin.gitlab.clientSecretTitle": "Application Secret Key:",
   "admin.gitlab.enableDescription": "When true, Mattermost allows team creation and account signup using GitLab OAuth.",
   "admin.gitlab.enableTitle": "Enable authentication with GitLab: ",
   "admin.gitlab.settingsTitle": "GitLab Settings",
   "admin.gitlab.tokenDescription": "Enter https://<your-gitlab-url>/oauth/token.   Make sure you use HTTP or HTTPS in your URL depending on your server configuration.",
-  "admin.gitlab.tokenExample": "Ex \"https://<your-gitlab-url>/oauth/token\"",
+  "admin.gitlab.tokenExample": "E.g.: \"https://<your-gitlab-url>/oauth/token\"",
   "admin.gitlab.tokenTitle": "Token Endpoint:",
   "admin.gitlab.userDescription": "Enter https://<your-gitlab-url>/api/v3/user.   Make sure you use HTTP or HTTPS in your URL depending on your server configuration.",
-  "admin.gitlab.userExample": "Ex \"https://<your-gitlab-url>/api/v3/user\"",
+  "admin.gitlab.userExample": "E.g.: \"https://<your-gitlab-url>/api/v3/user\"",
   "admin.gitlab.userTitle": "User API Endpoint:",
   "admin.google.EnableHtmlDesc": "<ol><li><a href='https://accounts.google.com/login'>Log in</a> to your Google account.</li><li>Go to <a href='https://console.developers.google.com'>https://console.developers.google.com</a>, click <strong>Credentials</strong> in the left hand sidebar and enter \"Mattermost - your-company-name\" as the <strong>Project Name</strong>, then click <strong>Create</strong>.</li><li>Click the <strong>OAuth consent screen</strong> header and enter \"Mattermost\" as the <strong>Product name shown to users</strong>, then click <strong>Save</strong>.</li><li>Under the <strong>Credentials</strong> header, click <strong>Create credentials</strong>, choose <strong>OAuth client ID</strong> and select <strong>Web Application</strong>.</li><li>Under <strong>Restrictions</strong> and <strong>Authorized redirect URIs</strong> enter <strong>your-mattermost-url/signup/google/complete</strong> (example: http://localhost:8065/signup/google/complete). Click <strong>Create</strong>.</li><li>Paste the <strong>Client ID</strong> and <strong>Client Secret</strong> to the fields below, then click <strong>Save</strong>.</li><li>Finally, go to <a href='https://console.developers.google.com/apis/api/plus/overview'>Google+ API</a> and click <strong>Enable</strong>. This might take a few minutes to propagate through Google's systems.</li></ol>",
   "admin.google.authTitle": "Auth Endpoint:",
   "admin.google.clientIdDescription": "The Client ID you received when registering your application with Google.",
-  "admin.google.clientIdExample": "Ex \"7602141235235-url0fhs1mayfasbmop5qlfns8dh4.apps.googleusercontent.com\"",
+  "admin.google.clientIdExample": "E.g.: \"7602141235235-url0fhs1mayfasbmop5qlfns8dh4.apps.googleusercontent.com\"",
   "admin.google.clientIdTitle": "Client ID:",
   "admin.google.clientSecretDescription": "The Client Secret you received when registering your application with Google.",
-  "admin.google.clientSecretExample": "Ex \"H8sz0Az-dDs2p15-7QzD231\"",
+  "admin.google.clientSecretExample": "E.g.: \"H8sz0Az-dDs2p15-7QzD231\"",
   "admin.google.clientSecretTitle": "Client Secret:",
   "admin.google.tokenTitle": "Token Endpoint:",
   "admin.google.userTitle": "User API Endpoint:",
   "admin.image.amazonS3BucketDescription": "Name you selected for your S3 bucket in AWS.",
-  "admin.image.amazonS3BucketExample": "Ex \"mattermost-media\"",
+  "admin.image.amazonS3BucketExample": "E.g.: \"mattermost-media\"",
   "admin.image.amazonS3BucketTitle": "Amazon S3 Bucket:",
   "admin.image.amazonS3IdDescription": "Obtain this credential from your Amazon EC2 administrator.",
-  "admin.image.amazonS3IdExample": "Ex \"AKIADTOVBGERKLCBV\"",
+  "admin.image.amazonS3IdExample": "E.g.: \"AKIADTOVBGERKLCBV\"",
   "admin.image.amazonS3IdTitle": "Amazon S3 Access Key ID:",
   "admin.image.amazonS3RegionDescription": "AWS region you selected for creating your S3 bucket.",
-  "admin.image.amazonS3RegionExample": "Ex \"us-east-1\"",
+  "admin.image.amazonS3RegionExample": "E.g.: \"us-east-1\"",
   "admin.image.amazonS3RegionTitle": "Amazon S3 Region:",
   "admin.image.amazonS3SecretDescription": "Obtain this credential from your Amazon EC2 administrator.",
-  "admin.image.amazonS3SecretExample": "Ex \"jcuS8PuvcpGhpgHhlcpT1Mx42pnqMxQY\"",
+  "admin.image.amazonS3SecretExample": "E.g.: \"jcuS8PuvcpGhpgHhlcpT1Mx42pnqMxQY\"",
   "admin.image.amazonS3SecretTitle": "Amazon S3 Secret Access Key:",
   "admin.image.localDescription": "Directory to which files and images are written. If blank, defaults to ./data/.",
-  "admin.image.localExample": "Ex \"./data/\"",
+  "admin.image.localExample": "E.g.: \"./data/\"",
   "admin.image.localTitle": "Local Storage Directory:",
   "admin.image.maxFileSizeDescription": "Maximum file size for message attachments in megabytes. Caution: Verify server memory can support your setting choice. Large file sizes increase the risk of server crashes and failed uploads due to network interruptions.",
   "admin.image.maxFileSizeExample": "50",
   "admin.image.maxFileSizeTitle": "Maximum File Size:",
   "admin.image.previewHeightDescription": "Maximum height of preview image (\"0\": Sets to auto-size). Updating this value changes how preview images render in future, but does not change images created in the past.",
-  "admin.image.previewHeightExample": "Ex \"0\"",
+  "admin.image.previewHeightExample": "E.g.: \"0\"",
   "admin.image.previewHeightTitle": "Image Preview Height:",
   "admin.image.previewWidthDescription": "Maximum width of preview image. Updating this value changes how preview images render in future, but does not change images created in the past.",
-  "admin.image.previewWidthExample": "Ex \"1024\"",
+  "admin.image.previewWidthExample": "E.g.: \"1024\"",
   "admin.image.previewWidthTitle": "Image Preview Width:",
   "admin.image.profileHeightDescription": "Height of profile picture.",
-  "admin.image.profileHeightExample": "Ex \"0\"",
+  "admin.image.profileHeightExample": "E.g.: \"0\"",
   "admin.image.profileHeightTitle": "Profile Picture Height:",
   "admin.image.profileWidthDescription": "Width of profile picture.",
-  "admin.image.profileWidthExample": "Ex \"1024\"",
+  "admin.image.profileWidthExample": "E.g.: \"1024\"",
   "admin.image.profileWidthTitle": "Profile Picture Width:",
   "admin.image.publicLinkDescription": "32-character salt added to signing of public image links. Randomly generated on install. Click \"Regenerate\" to create new salt.",
-  "admin.image.publicLinkExample": "Ex \"gxHVDcKUyP2y1eiyW8S8na1UYQAfq6J6\"",
+  "admin.image.publicLinkExample": "E.g.: \"gxHVDcKUyP2y1eiyW8S8na1UYQAfq6J6\"",
   "admin.image.publicLinkTitle": "Public Link Salt:",
   "admin.image.shareDescription": "Allow users to share public links to files and images.",
   "admin.image.shareTitle": "Enable Public File Links: ",
@@ -385,54 +385,54 @@
   "admin.image.storeLocal": "Local File System",
   "admin.image.storeTitle": "File Storage System:",
   "admin.image.thumbHeightDescription": "Height of thumbnails generated from uploaded images. Updating this value changes how thumbnail images render in future, but does not change images created in the past.",
-  "admin.image.thumbHeightExample": "Ex \"100\"",
+  "admin.image.thumbHeightExample": "E.g.: \"100\"",
   "admin.image.thumbHeightTitle": "Attachment Thumbnail Height:",
   "admin.image.thumbWidthDescription": "Width of thumbnails generated from uploaded images. Updating this value changes how thumbnail images render in future, but does not change images created in the past.",
-  "admin.image.thumbWidthExample": "Ex \"120\"",
+  "admin.image.thumbWidthExample": "E.g.: \"120\"",
   "admin.image.thumbWidthTitle": "Attachment Thumbnail Width:",
   "admin.integrations.custom": "Custom Integrations",
   "admin.integrations.external": "External Services",
   "admin.integrations.webrtc": "Mattermost WebRTC",
   "admin.ldap.baseDesc": "The Base DN is the Distinguished Name of the location where Mattermost should start its search for users in the AD/LDAP tree.",
-  "admin.ldap.baseEx": "Ex \"ou=Unit Name,dc=corp,dc=example,dc=com\"",
+  "admin.ldap.baseEx": "E.g.: \"ou=Unit Name,dc=corp,dc=example,dc=com\"",
   "admin.ldap.baseTitle": "BaseDN:",
   "admin.ldap.bindPwdDesc": "Password of the user given in \"Bind Username\".",
   "admin.ldap.bindPwdTitle": "Bind Password:",
   "admin.ldap.bindUserDesc": "The username used to perform the AD/LDAP search. This should typically be an account created specifically for use with Mattermost. It should have access limited to read the portion of the AD/LDAP tree specified in the BaseDN field.",
   "admin.ldap.bindUserTitle": "Bind Username:",
   "admin.ldap.emailAttrDesc": "The attribute in the AD/LDAP server that will be used to populate the email addresses of users in Mattermost.",
-  "admin.ldap.emailAttrEx": "Ex \"mail\" or \"userPrincipalName\"",
+  "admin.ldap.emailAttrEx": "E.g.: \"mail\" or \"userPrincipalName\"",
   "admin.ldap.emailAttrTitle": "Email Attribute:",
   "admin.ldap.enableDesc": "When true, Mattermost allows login using AD/LDAP",
   "admin.ldap.enableTitle": "Enable sign-in with AD/LDAP:",
   "admin.ldap.firstnameAttrDesc": "(Optional) The attribute in the AD/LDAP server that will be used to populate the first name of users in Mattermost. When set, users will not be able to edit their first name, since it is synchronized with the LDAP server. When left blank, users can set their own first name in Account Settings.",
-  "admin.ldap.firstnameAttrEx": "Ex \"givenName\"",
+  "admin.ldap.firstnameAttrEx": "E.g.: \"givenName\"",
   "admin.ldap.firstnameAttrTitle": "First Name Attribute",
   "admin.ldap.idAttrDesc": "The attribute in the AD/LDAP server that will be used as a unique identifier in Mattermost. It should be an AD/LDAP attribute with a value that does not change, such as username or uid. If a user’s ID Attribute changes, it will create a new Mattermost account unassociated with their old one. This is the value used to log in to Mattermost in the \"AD/LDAP Username\" field on the sign in page. Normally this attribute is the same as the “Username Attribute” field above. If your team typically uses domain\\username to sign in to other services with AD/LDAP, you may choose to put domain\\username in this field to maintain consistency between sites.",
-  "admin.ldap.idAttrEx": "Ex \"sAMAccountName\"",
+  "admin.ldap.idAttrEx": "E.g.: \"sAMAccountName\"",
   "admin.ldap.idAttrTitle": "ID Attribute: ",
   "admin.ldap.lastnameAttrDesc": "(Optional) The attribute in the AD/LDAP server that will be used to populate the last name of users in Mattermost. When set, users will not be able to edit their last name, since it is synchronized with the LDAP server. When left blank, users can set their own last name in Account Settings.",
-  "admin.ldap.lastnameAttrEx": "Ex \"sn\"",
+  "admin.ldap.lastnameAttrEx": "E.g.: \"sn\"",
   "admin.ldap.lastnameAttrTitle": "Last Name Attribute:",
   "admin.ldap.ldap_test_button": "AD/LDAP Test",
   "admin.ldap.loginNameDesc": "The placeholder text that appears in the login field on the login page. Defaults to \"AD/LDAP Username\".",
-  "admin.ldap.loginNameEx": "Ex \"AD/LDAP Username\"",
+  "admin.ldap.loginNameEx": "E.g.: \"AD/LDAP Username\"",
   "admin.ldap.loginNameTitle": "Login Field Name:",
-  "admin.ldap.maxPageSizeEx": "Ex \"2000\"",
+  "admin.ldap.maxPageSizeEx": "E.g.: \"2000\"",
   "admin.ldap.maxPageSizeHelpText": "The maximum number of users the Mattermost server will request from the AD/LDAP server at one time. 0 is unlimited.",
   "admin.ldap.maxPageSizeTitle": "Maximum Page Size:",
   "admin.ldap.nicknameAttrDesc": "(Optional) The attribute in the AD/LDAP server that will be used to populate the nickname of users in Mattermost. When set, users will not be able to edit their nickname, since it is synchronized with the LDAP server. When left blank, users can set their own nickname in Account Settings.",
-  "admin.ldap.nicknameAttrEx": "Ex \"nickname\"",
+  "admin.ldap.nicknameAttrEx": "E.g.: \"nickname\"",
   "admin.ldap.nicknameAttrTitle": "Nickname Attribute:",
   "admin.ldap.noLicense": "<h4 class=\"banner__heading\">Note:</h4><p>AD/LDAP is an enterprise feature. Your current license does not support AD/LDAP. Click <a href=\"http://mattermost.com\" target=\"_blank\">here</a> for information and pricing on enterprise licenses.</p>",
   "admin.ldap.portDesc": "The port Mattermost will use to connect to the AD/LDAP server. Default is 389.",
-  "admin.ldap.portEx": "Ex \"389\"",
+  "admin.ldap.portEx": "E.g.: \"389\"",
   "admin.ldap.portTitle": "AD/LDAP Port:",
   "admin.ldap.queryDesc": "The timeout value for queries to the AD/LDAP server. Increase if you are getting timeout errors caused by a slow AD/LDAP server.",
-  "admin.ldap.queryEx": "Ex \"60\"",
+  "admin.ldap.queryEx": "E.g.: \"60\"",
   "admin.ldap.queryTitle": "Query Timeout (seconds):",
   "admin.ldap.serverDesc": "The domain or IP address of AD/LDAP server.",
-  "admin.ldap.serverEx": "Ex \"10.0.0.23\"",
+  "admin.ldap.serverEx": "E.g.: \"10.0.0.23\"",
   "admin.ldap.serverTitle": "AD/LDAP Server:",
   "admin.ldap.skipCertificateVerification": "Skip Certificate Verification:",
   "admin.ldap.skipCertificateVerificationDesc": "Skips the certificate verification step for TLS or STARTTLS connections. Not recommended for production environments where TLS is required. For testing only.",
@@ -448,7 +448,7 @@
   "admin.ldap.userFilterDisc": "(Optional) Enter an AD/LDAP Filter to use when searching for user objects. Only the users selected by the query will be able to access Mattermost. For Active Directory, the query to filter out disabled users is (&(objectCategory=Person)(!(UserAccountControl:1.2.840.113556.1.4.803:=2))).",
   "admin.ldap.userFilterEx": "Ex. \"(objectClass=user)\"",
   "admin.ldap.userFilterTitle": "User Filter:",
-  "admin.ldap.usernameAttrEx": "Ex \"sAMAccountName\"",
+  "admin.ldap.usernameAttrEx": "E.g.: \"sAMAccountName\"",
   "admin.ldap.usernameAttrTitle": "Username Attribute:",
   "admin.license.choose": "Choose File",
   "admin.license.chooseFile": "Choose File",
@@ -506,17 +506,17 @@
   "admin.office365.EnableHtmlDesc": "<ol><li><a href='https://login.microsoftonline.com/'>Log in</a> to your Microsoft or Office 365 account. Make sure it's the account on the same <a href='https://msdn.microsoft.com/en-us/library/azure/jj573650.aspx#Anchor_0'>tenant</a> that you would like users to log in with.</li><li>Go to <a href='https://apps.dev.microsoft.com'>https://apps.dev.microsoft.com</a>, click <strong>Go to app list</strong> > <strong>Add an app</strong> and use \"Mattermost - your-company-name\" as the <strong>Application Name</strong>.</li><li>Under <strong>Application Secrets</strong>, click <strong>Generate New Password</strong> and paste it to the <strong>Application Secret Password</strong> field below.</li><li>Under <strong>Platforms</strong>, click <strong>Add Platform</strong>, choose <strong>Web</strong> and enter <strong>your-mattermost-url/signup/office365/complete</strong> (example: http://localhost:8065/signup/office365/complete) under <strong>Redirect URIs</strong>. Also uncheck <strong>Allow Implicit Flow</strong>.</li><li>Finally, click <strong>Save</strong> and then paste the <strong>Application ID</strong> below.</li></ol>",
   "admin.office365.authTitle": "Auth Endpoint:",
   "admin.office365.clientIdDescription": "The Application/Client ID you received when registering your application with Microsoft.",
-  "admin.office365.clientIdExample": "Ex \"adf3sfa2-ag3f-sn4n-ids0-sh1hdax192qq\"",
+  "admin.office365.clientIdExample": "E.g.: \"adf3sfa2-ag3f-sn4n-ids0-sh1hdax192qq\"",
   "admin.office365.clientIdTitle": "Application ID:",
   "admin.office365.clientSecretDescription": "The Application Secret Password you generated when registering your application with Microsoft.",
-  "admin.office365.clientSecretExample": "Ex \"shAieM47sNBfgl20f8ci294\"",
+  "admin.office365.clientSecretExample": "E.g.: \"shAieM47sNBfgl20f8ci294\"",
   "admin.office365.clientSecretTitle": "Application Secret Password:",
   "admin.office365.tokenTitle": "Token Endpoint:",
   "admin.office365.userTitle": "User API Endpoint:",
   "admin.password.lowercase": "At least one lowercase letter",
   "admin.password.minimumLength": "Minimum Password Length:",
   "admin.password.minimumLengthDescription": "Minimum number of characters required for a valid password. Must be a whole number greater than or equal to {min} and less than or equal to {max}.",
-  "admin.password.minimumLengthExample": "Ex \"5\"",
+  "admin.password.minimumLengthExample": "E.g.: \"5\"",
   "admin.password.number": "At least one number",
   "admin.password.preview": "Error message preview",
   "admin.password.requirements": "Password Requirements:",
@@ -530,22 +530,25 @@
   "admin.rate.enableLimiterDescription": "When true, APIs are throttled at rates specified below.",
   "admin.rate.enableLimiterTitle": "Enable Rate Limiting: ",
   "admin.rate.httpHeaderDescription": "When filled in, vary rate limiting by HTTP header field specified (e.g. when configuring NGINX set to \"X-Real-IP\", when configuring AmazonELB set to \"X-Forwarded-For\").",
-  "admin.rate.httpHeaderExample": "Ex \"X-Real-IP\", \"X-Forwarded-For\"",
+  "admin.rate.httpHeaderExample": "E.g.: \"X-Real-IP\", \"X-Forwarded-For\"",
   "admin.rate.httpHeaderTitle": "Vary rate limit by HTTP header",
   "admin.rate.maxBurst": "Maximum Burst Size:",
   "admin.rate.maxBurstDescription": "Maximum number of requests allowed beyond the per second query limit.",
   "admin.rate.maxBurstExample": "Ex \"100\"",
   "admin.rate.memoryDescription": "Maximum number of users sessions connected to the system as determined by \"Vary rate limit by remote address\" and \"Vary rate limit by HTTP header\" settings below.",
-  "admin.rate.memoryExample": "Ex \"10000\"",
+  "admin.rate.memoryExample": "E.g.: \"10000\"",
   "admin.rate.memoryTitle": "Memory Store Size:",
   "admin.rate.noteDescription": "Changing properties in this section will require a server restart before taking effect.",
   "admin.rate.noteTitle": "Note:",
   "admin.rate.queriesDescription": "Throttles API at this number of requests per second.",
-  "admin.rate.queriesExample": "Ex \"10\"",
+  "admin.rate.queriesExample": "E.g.: \"10\"",
   "admin.rate.queriesTitle": "Maximum Queries per Second:",
   "admin.rate.remoteDescription": "When true, rate limit API access by IP address.",
   "admin.rate.remoteTitle": "Vary rate limit by remote address: ",
   "admin.rate.title": "Rate Limit Settings",
+  "admin.rate.maxBurst": "Max Burst:",
+  "admin.rate.maxBurstExample": "E.g.: \"100\"",
+  "admin.rate.maxBurstDescription": "Maximum number of requests allowed beyond the per second query limit.",
   "admin.recycle.button": "Recycle Database Connections",
   "admin.recycle.loading": " Recycling...",
   "admin.recycle.recycleDescription": "Deployments using multiple databases can switch from one master database to another without restarting the Mattermost server by updating \"config.json\" to the new desired configuration and using the <a href=\"../general/configuration\"><b>Configuration > Reload Configuration from Disk</b></a> feature to load the new settings while the server is running. The administrator should then use <b>Recycle Database Connections</b> feature to recycle the database connections based on the new settings.",
@@ -562,38 +565,38 @@
   "admin.reset_password.titleReset": "Reset Password",
   "admin.reset_password.titleSwitch": "Switch Account to Email/Password",
   "admin.saml.assertionConsumerServiceURLDesc": "Enter https://<your-mattermost-url>/login/sso/saml. Make sure you use HTTP or HTTPS in your URL depending on your server configuration. This field is also known as the Assertion Consumer Service URL.",
-  "admin.saml.assertionConsumerServiceURLEx": "Ex \"https://<your-mattermost-url>/login/sso/saml\"",
+  "admin.saml.assertionConsumerServiceURLEx": "E.g.: \"https://<your-mattermost-url>/login/sso/saml\"",
   "admin.saml.assertionConsumerServiceURLTitle": "Service Provider Login URL:",
   "admin.saml.emailAttrDesc": "The attribute in the SAML Assertion that will be used to populate the email addresses of users in Mattermost.",
-  "admin.saml.emailAttrEx": "Ex \"Email\" or \"PrimaryEmail\"",
+  "admin.saml.emailAttrEx": "E.g.: \"Email\" or \"PrimaryEmail\"",
   "admin.saml.emailAttrTitle": "Email Attribute:",
   "admin.saml.enableDescription": "When true, Mattermost allows login using SAML. Please see <a href='http://docs.mattermost.com/deployment/sso-saml.html' target='_blank'>documentation</a> to learn more about configuring SAML for Mattermost.",
   "admin.saml.enableTitle": "Enable Login With SAML:",
   "admin.saml.encryptDescription": "When true, Mattermost will decrypt SAML Assertions encrypted with your Service Provider Public Certificate.",
   "admin.saml.encryptTitle": "Enable Encryption:",
   "admin.saml.firstnameAttrDesc": "(Optional) The attribute in the SAML Assertion that will be used to populate the first name of users in Mattermost.",
-  "admin.saml.firstnameAttrEx": "Ex \"FirstName\"",
+  "admin.saml.firstnameAttrEx": "E.g.: \"FirstName\"",
   "admin.saml.firstnameAttrTitle": "First Name Attribute:",
   "admin.saml.idpCertificateFileDesc": "The public authentication certificate issued by your Identity Provider.",
   "admin.saml.idpCertificateFileRemoveDesc": "Remove the public authentication certificate issued by your Identity Provider.",
   "admin.saml.idpCertificateFileTitle": "Identity Provider Public Certificate:",
   "admin.saml.idpDescriptorUrlDesc": "The issuer URL for the Identity Provider you use for SAML requests.",
-  "admin.saml.idpDescriptorUrlEx": "Ex \"https://idp.example.org/SAML2/issuer\"",
+  "admin.saml.idpDescriptorUrlEx": "E.g.: \"https://idp.example.org/SAML2/issuer\"",
   "admin.saml.idpDescriptorUrlTitle": "Identity Provider Issuer URL:",
   "admin.saml.idpUrlDesc": "The URL where Mattermost sends a SAML request to start login sequence.",
-  "admin.saml.idpUrlEx": "Ex \"https://idp.example.org/SAML2/SSO/Login\"",
+  "admin.saml.idpUrlEx": "E.g.: \"https://idp.example.org/SAML2/SSO/Login\"",
   "admin.saml.idpUrlTitle": "SAML SSO URL:",
   "admin.saml.lastnameAttrDesc": "(Optional) The attribute in the SAML Assertion that will be used to populate the last name of users in Mattermost.",
-  "admin.saml.lastnameAttrEx": "Ex \"LastName\"",
+  "admin.saml.lastnameAttrEx": "E.g.: \"LastName\"",
   "admin.saml.lastnameAttrTitle": "Last Name Attribute:",
   "admin.saml.localeAttrDesc": "(Optional) The attribute in the SAML Assertion that will be used to populate the language of users in Mattermost.",
-  "admin.saml.localeAttrEx": "Ex \"Locale\" or \"PrimaryLanguage\"",
+  "admin.saml.localeAttrEx": "E.g.: \"Locale\" or \"PrimaryLanguage\"",
   "admin.saml.localeAttrTitle": "Preferred Language Attribute:",
   "admin.saml.loginButtonTextDesc": "(Optional) The text that appears in the login button on the login page. Defaults to \"With SAML\".",
-  "admin.saml.loginButtonTextEx": "Ex \"With OKTA\"",
+  "admin.saml.loginButtonTextEx": "E.g.: \"With OKTA\"",
   "admin.saml.loginButtonTextTitle": "Login Button Text:",
   "admin.saml.nicknameAttrDesc": "(Optional) The attribute in the SAML Assertion that will be used to populate the nickname of users in Mattermost.",
-  "admin.saml.nicknameAttrEx": "Ex \"Nickname\"",
+  "admin.saml.nicknameAttrEx": "E.g.: \"Nickname\"",
   "admin.saml.nicknameAttrTitle": "Nickname Attribute:",
   "admin.saml.privateKeyFileFileDesc": "The private key used to decrypt SAML Assertions from the Identity Provider.",
   "admin.saml.privateKeyFileFileRemoveDesc": "Remove the private key used to decrypt SAML Assertions from the Identity Provider.",
@@ -609,7 +612,7 @@
   "admin.saml.uploading.certificate": "Uploading Certificate...",
   "admin.saml.uploading.privateKey": "Uploading Private Key...",
   "admin.saml.usernameAttrDesc": "The attribute in the SAML Assertion that will be used to populate the username field in Mattermost.",
-  "admin.saml.usernameAttrEx": "Ex \"Username\"",
+  "admin.saml.usernameAttrEx": "E.g.: \"Username\"",
   "admin.saml.usernameAttrTitle": "Username Attribute:",
   "admin.saml.verifyDescription": "When true, Mattermost verifies that the signature sent from the SAML Response matches the Service Provider Login URL",
   "admin.saml.verifyTitle": "Verify Signature:",
@@ -628,7 +631,7 @@
   "admin.select_team.select": "Select",
   "admin.select_team.selectTeam": "Select Team",
   "admin.service.attemptDescription": "Number of login attempts allowed before a user is locked out and required to reset their password via email.",
-  "admin.service.attemptExample": "Ex \"10\"",
+  "admin.service.attemptExample": "E.g.: \"10\"",
   "admin.service.attemptTitle": "Maximum Login Attempts:",
   "admin.service.cmdsDesc": "When true, custom slash commands will be allowed. See <a href='http://docs.mattermost.com/developer/slash-commands.html' target='_blank'>documentation</a> to learn more.",
   "admin.service.cmdsTitle": "Enable Custom Slash Commands: ",
@@ -638,7 +641,7 @@
   "admin.service.developerDesc": "When true, Javascript errors are shown in a red bar at the top of the user interface. Not recommended for use in production. ",
   "admin.service.developerTitle": "Enable Developer Mode: ",
   "admin.service.googleDescription": "Set this key to enable the display of titles for embedded YouTube video previews. Without the key, YouTube previews will still be created based on hyperlinks appearing in messages or comments but they will not show the video title. View a <a href=\"https://www.youtube.com/watch?v=Im69kzhpR3I\" target=\"_blank\">Google Developers Tutorial</a> for instructions on how to obtain a key.",
-  "admin.service.googleExample": "Ex \"7rAh6iwQCkV4cA1Gsg3fgGOXJAQ43QV\"",
+  "admin.service.googleExample": "E.g.: \"7rAh6iwQCkV4cA1Gsg3fgGOXJAQ43QV\"",
   "admin.service.googleTitle": "Google API Key:",
   "admin.service.iconDescription": "When true, webhooks, slash commands and other integrations, such as <a href=\"https://docs.mattermost.com/integrations/zapier.html\" target=\"_blank\">Zapier</a>, will be allowed to change the profile picture they post with. Note: Combined with allowing integrations to override usernames, users may be able to perform phishing attacks by attempting to impersonate other users.",
   "admin.service.iconTitle": "Enable integrations to override profile picture icons:",
@@ -648,7 +651,7 @@
   "admin.service.integrationAdminDesc": "When true, webhooks and slash commands can only be created, edited and viewed by Team and System Admins, and OAuth 2.0 applications by System Admins. Integrations are available to all users after they have been created by the Admin.",
   "admin.service.listenAddress": "Listen Address:",
   "admin.service.listenDescription": "The address to which to bind and listen. Entering \":8065\" will bind to all interfaces or you can choose one like \"127.0.0.1:8065\". If you choose a low number port, you must have permissions to bind to that port. On Linux you can use: \"sudo setcap cap_net_bind_service=+ep ./bin/platform\" to allow Mattermost to bind to low ports.",
-  "admin.service.listenExample": "Ex \":8065\"",
+  "admin.service.listenExample": "E.g.: \":8065\"",
   "admin.service.mfaDesc": "When true, users will be given the option to add multi-factor authentication to their account. They will need a smartphone and an authenticator app such as Google Authenticator.",
   "admin.service.mfaTitle": "Enable Multi-factor Authentication:",
   "admin.service.mobileSessionDays": "Session length mobile (days):",
@@ -660,14 +663,14 @@
   "admin.service.securityDesc": "When true, System Administrators are notified by email if a relevant security fix alert has been announced in the last 12 hours. Requires email to be enabled.",
   "admin.service.securityTitle": "Enable Security Alerts: ",
   "admin.service.segmentDescription": "Segment.com is an online service that can be optionally used to track detailed system statistics. You can obtain a key by signing-up for a free account at Segment.com.",
-  "admin.service.segmentExample": "Ex \"g3fgGOXJAQ43QV7rAh6iwQCkV4cA1Gs\"",
+  "admin.service.segmentExample": "E.g.: \"g3fgGOXJAQ43QV7rAh6iwQCkV4cA1Gs\"",
   "admin.service.segmentTitle": "Segment Write Key:",
   "admin.service.sessionCache": "Session Cache (minutes):",
   "admin.service.sessionCacheDesc": "The number of minutes to cache a session in memory.",
-  "admin.service.sessionDaysEx": "Ex \"30\"",
+  "admin.service.sessionDaysEx": "E.g.: \"30\"",
   "admin.service.siteURL": "Site URL:",
   "admin.service.siteURLDescription": "The URL, including port number and protocol, that users will use to access Mattermost. This field can be left blank unless you are configuring email batching in <b>Notifications > Email</b>. When blank, the URL is automatically configured based on incoming traffic.",
-  "admin.service.siteURLExample": "Ex \"https://mattermost.example.com:1234\"",
+  "admin.service.siteURLExample": "E.g.: \"https://mattermost.example.com:1234\"",
   "admin.service.ssoSessionDays": "Session length SSO (days):",
   "admin.service.ssoSessionDaysDesc": "The number of days from the last time a user entered their credentials to the expiry of the user's session. If the authentication method is SAML or GitLab, the user may automatically be logged back in to Mattermost if they are already logged in to SAML or GitLab. After changing this setting, the setting will take effect after the next time the user enters their credentials.",
   "admin.service.testingDescription": "When true, /loadtest slash command is enabled to load test accounts, data and text formatting. Changing this requires a server restart before taking effect.",
@@ -734,13 +737,13 @@
   "admin.sql.dataSource": "Data Source:",
   "admin.sql.driverName": "Driver Name:",
   "admin.sql.keyDescription": "32-character salt available to encrypt and decrypt sensitive fields in database.",
-  "admin.sql.keyExample": "Ex \"gxHVDcKUyP2y1eiyW8S8na1UYQAfq6J6\"",
+  "admin.sql.keyExample": "E.g.: \"gxHVDcKUyP2y1eiyW8S8na1UYQAfq6J6\"",
   "admin.sql.keyTitle": "At Rest Encrypt Key:",
   "admin.sql.maxConnectionsDescription": "Maximum number of idle connections held open to the database.",
-  "admin.sql.maxConnectionsExample": "Ex \"10\"",
+  "admin.sql.maxConnectionsExample": "E.g.: \"10\"",
   "admin.sql.maxConnectionsTitle": "Maximum Idle Connections:",
   "admin.sql.maxOpenDescription": "Maximum number of open connections held open to the database.",
-  "admin.sql.maxOpenExample": "Ex \"10\"",
+  "admin.sql.maxOpenExample": "E.g.: \"10\"",
   "admin.sql.maxOpenTitle": "Maximum Open Connections:",
   "admin.sql.noteDescription": "Changing properties in this section will require a server restart before taking effect.",
   "admin.sql.noteTitle": "Note:",
@@ -777,7 +780,7 @@
   "admin.team.dirDesc": "When true, teams that are configured to show in team directory will show on main page inplace of creating a new team.",
   "admin.team.dirTitle": "Enable Team Directory: ",
   "admin.team.maxUsersDescription": "Maximum total number of users per team, including both active and inactive users.",
-  "admin.team.maxUsersExample": "Ex \"25\"",
+  "admin.team.maxUsersExample": "E.g.: \"25\"",
   "admin.team.maxUsersTitle": "Max Users Per Team:",
   "admin.team.noBrandImage": "No brand image uploaded",
   "admin.team.openServerDescription": "When true, anyone can signup for a user account on this server without the need to be invited.",
@@ -785,14 +788,14 @@
   "admin.team.restrictDescription": "Teams and user accounts can only be created from a specific domain (e.g. \"mattermost.org\") or list of comma-separated domains (e.g. \"corp.mattermost.com, mattermost.org\").",
   "admin.team.restrictDirectMessage": "Enable users to open Direct Message channels with:",
   "admin.team.restrictDirectMessageDesc": "'Any user on the Mattermost server' enables users to open a Direct Message channel with any user on the server, even if they are not on any teams together. 'Any member of the team' limits the ability to open Direct Message channels to only users who are in the same team.",
-  "admin.team.restrictExample": "Ex \"corp.mattermost.com, mattermost.org\"",
+  "admin.team.restrictExample": "E.g.: \"corp.mattermost.com, mattermost.org\"",
   "admin.team.restrictNameDesc": "When true, You cannot create a team name with reserved words like www, admin, support, test, channel, etc",
   "admin.team.restrictNameTitle": "Restrict Team Names: ",
   "admin.team.restrictTitle": "Restrict account creation to specified email domains:",
   "admin.team.restrict_direct_message_any": "Any user on the Mattermost server",
   "admin.team.restrict_direct_message_team": "Any member of the team",
   "admin.team.siteNameDescription": "Name of service shown in login screens and UI.",
-  "admin.team.siteNameExample": "Ex \"Mattermost\"",
+  "admin.team.siteNameExample": "E.g.: \"Mattermost\"",
   "admin.team.siteNameTitle": "Site Name:",
   "admin.team.teamCreationDescription": "When false, only System Administrators can create teams.",
   "admin.team.teamCreationTitle": "Enable Team Creation: ",
@@ -831,25 +834,25 @@
   "admin.webrtc.enableDescription": "When true, Mattermost allows making <strong>one-on-one</strong> video calls. WebRTC calls are available on Chrome, Firefox and Mattermost Desktop Apps.",
   "admin.webrtc.enableTitle": "Enable Mattermost WebRTC: ",
   "admin.webrtc.gatewayAdminSecretDescription": "Enter your admin secret password to access the Gateway Admin URL.",
-  "admin.webrtc.gatewayAdminSecretExample": "Ex \"PVRzWNN1Tg6szn7IQWvhpAvLByScWxdy\"",
+  "admin.webrtc.gatewayAdminSecretExample": "E.g.: \"PVRzWNN1Tg6szn7IQWvhpAvLByScWxdy\"",
   "admin.webrtc.gatewayAdminSecretTitle": "Gateway Admin Secret:",
   "admin.webrtc.gatewayAdminUrlDescription": "Enter https://<mattermost-webrtc-gateway-url>:<port>/admin. Make sure you use HTTP or HTTPS in your URL depending on your server configuration. Mattermost WebRTC uses this URL to obtain valid tokens for each peer to establish the connection.",
-  "admin.webrtc.gatewayAdminUrlExample": "Ex \"https://webrtc.mattermost.com:7089/admin\"",
+  "admin.webrtc.gatewayAdminUrlExample": "E.g.: \"https://webrtc.mattermost.com:7089/admin\"",
   "admin.webrtc.gatewayAdminUrlTitle": "Gateway Admin URL:",
   "admin.webrtc.gatewayWebsocketUrlDescription": "Enter wss://<mattermost-webrtc-gateway-url>:<port>. Make sure you use WS or WSS in your URL depending on your server configuration. This is the websocket used to signal and establish communication between the peers.",
-  "admin.webrtc.gatewayWebsocketUrlExample": "Ex \"wss://webrtc.mattermost.com:8189\"",
+  "admin.webrtc.gatewayWebsocketUrlExample": "E.g.: \"wss://webrtc.mattermost.com:8189\"",
   "admin.webrtc.gatewayWebsocketUrlTitle": "Gateway Websocket URL:",
   "admin.webrtc.stunUriDescription": "Enter your STUN URI as stun:<your-stun-url>:<port>. STUN is a standardized network protocol to allow an end host to assist devices to access its public IP address if it is located behind a NAT.",
-  "admin.webrtc.stunUriExample": "Ex \"stun:webrtc.mattermost.com:5349\"",
+  "admin.webrtc.stunUriExample": "E.g.: \"stun:webrtc.mattermost.com:5349\"",
   "admin.webrtc.stunUriTitle": "STUN URI",
   "admin.webrtc.turnSharedKeyDescription": "Enter your TURN Server Shared Key. This is used to created dynamic passwords to establish the connection. Each password is valid for a short period of time.",
-  "admin.webrtc.turnSharedKeyExample": "Ex \"bXdkOWQxc3d0Ynk3emY5ZmsxZ3NtazRjaWg=\"",
+  "admin.webrtc.turnSharedKeyExample": "E.g.: \"bXdkOWQxc3d0Ynk3emY5ZmsxZ3NtazRjaWg=\"",
   "admin.webrtc.turnSharedKeyTitle": "TURN Shared Key:",
   "admin.webrtc.turnUriDescription": "Enter your TURN URI as turn:<your-turn-url>:<port>. TURN is a standardized network protocol to allow an end host to assist devices to establish a connection by using a relay public IP address if it is located behind a symmetric NAT.",
-  "admin.webrtc.turnUriExample": "Ex \"turn:webrtc.mattermost.com:5349\"",
+  "admin.webrtc.turnUriExample": "E.g.: \"turn:webrtc.mattermost.com:5349\"",
   "admin.webrtc.turnUriTitle": "TURN URI",
   "admin.webrtc.turnUsernameDescription": "Enter your TURN Server Username.",
-  "admin.webrtc.turnUsernameExample": "Ex \"myusername\"",
+  "admin.webrtc.turnUsernameExample": "E.g.: \"myusername\"",
   "admin.webrtc.turnUsernameTitle": "TURN Username:",
   "admin.webserverModeDisabled": "Disabled",
   "admin.webserverModeDisabledDescription": "The Mattermost server will not serve static files.",