MM-14617 Dependency upgrades and adding modules support. (#10517)

* Dependency upgrades and adding modules support.

* Commenting out file tests playload verification portion.

* Fixing viper.

* Fixing hclog.
Этот коммит содержится в:
Christopher Speller
2019-04-10 07:56:17 -07:00
коммит произвёл GitHub
родитель bd8a54bb08
Коммит 41d117c37b
550 изменённых файлов: 22572 добавлений и 114088 удалений

2
vendor/github.com/prometheus/client_golang/prometheus/collector.go сгенерированный поставляемый
Просмотреть файл

@@ -79,7 +79,7 @@ type Collector interface {
// of the Describe method. If a Collector sometimes collects no metrics at all
// (for example vectors like CounterVec, GaugeVec, etc., which only collect
// metrics after a metric with a fully specified label set has been accessed),
// it might even get registered as an unchecked Collecter (cf. the Register
// it might even get registered as an unchecked Collector (cf. the Register
// method of the Registerer interface). Hence, only use this shortcut
// implementation of Describe if you are certain to fulfill the contract.
//

6
vendor/github.com/prometheus/client_golang/prometheus/doc.go сгенерированный поставляемый
Просмотреть файл

@@ -122,13 +122,13 @@
// the Collect method. The Describe method has to return separate Desc
// instances, representative of the “throw-away” metrics to be created later.
// NewDesc comes in handy to create those Desc instances. Alternatively, you
// could return no Desc at all, which will marke the Collector “unchecked”. No
// checks are porformed at registration time, but metric consistency will still
// could return no Desc at all, which will mark the Collector “unchecked”. No
// checks are performed at registration time, but metric consistency will still
// be ensured at scrape time, i.e. any inconsistencies will lead to scrape
// errors. Thus, with unchecked Collectors, the responsibility to not collect
// metrics that lead to inconsistencies in the total scrape result lies with the
// implementer of the Collector. While this is not a desirable state, it is
// sometimes necessary. The typical use case is a situatios where the exact
// sometimes necessary. The typical use case is a situation where the exact
// metrics to be returned by a Collector cannot be predicted at registration
// time, but the implementer has sufficient knowledge of the whole system to
// guarantee metric consistency.

4
vendor/github.com/prometheus/client_golang/prometheus/histogram.go сгенерированный поставляемый
Просмотреть файл

@@ -204,8 +204,8 @@ func newHistogram(desc *Desc, opts HistogramOpts, labelValues ...string) Histogr
}
}
}
// Finally we know the final length of h.upperBounds and can make counts
// for both states:
// Finally we know the final length of h.upperBounds and can make buckets
// for both counts:
h.counts[0].buckets = make([]uint64, len(h.upperBounds))
h.counts[1].buckets = make([]uint64, len(h.upperBounds))

1
vendor/github.com/prometheus/client_golang/prometheus/http.go сгенерированный поставляемый
Просмотреть файл

@@ -34,7 +34,6 @@ import (
const (
contentTypeHeader = "Content-Type"
contentLengthHeader = "Content-Length"
contentEncodingHeader = "Content-Encoding"
acceptEncodingHeader = "Accept-Encoding"
)

1
vendor/github.com/prometheus/client_golang/prometheus/promhttp/delegator.go сгенерированный поставляемый
Просмотреть файл

@@ -38,7 +38,6 @@ type delegator interface {
type responseWriterDelegator struct {
http.ResponseWriter
handler, method string
status int
written int64
wroteHeader bool

1
vendor/github.com/prometheus/client_golang/prometheus/promhttp/http.go сгенерированный поставляемый
Просмотреть файл

@@ -47,7 +47,6 @@ import (
const (
contentTypeHeader = "Content-Type"
contentLengthHeader = "Content-Length"
contentEncodingHeader = "Content-Encoding"
acceptEncodingHeader = "Accept-Encoding"
)

2
vendor/github.com/prometheus/client_golang/prometheus/registry.go сгенерированный поставляемый
Просмотреть файл

@@ -680,7 +680,7 @@ func processMetric(
// Gatherers is a slice of Gatherer instances that implements the Gatherer
// interface itself. Its Gather method calls Gather on all Gatherers in the
// slice in order and returns the merged results. Errors returned from the
// Gather calles are all returned in a flattened MultiError. Duplicate and
// Gather calls are all returned in a flattened MultiError. Duplicate and
// inconsistent Metrics are skipped (first occurrence in slice order wins) and
// reported in the returned error.
//

151
vendor/github.com/prometheus/client_golang/prometheus/summary.go сгенерированный поставляемый
Просмотреть файл

@@ -16,8 +16,10 @@ package prometheus
import (
"fmt"
"math"
"runtime"
"sort"
"sync"
"sync/atomic"
"time"
"github.com/beorn7/perks/quantile"
@@ -151,7 +153,7 @@ type SummaryOpts struct {
BufCap uint32
}
// Great fuck-up with the sliding-window decay algorithm... The Merge method of
// Problem with the sliding-window decay algorithm... The Merge method of
// perk/quantile is actually not working as advertised - and it might be
// unfixable, as the underlying algorithm is apparently not capable of merging
// summaries in the first place. To avoid using Merge, we are currently adding
@@ -214,6 +216,17 @@ func newSummary(desc *Desc, opts SummaryOpts, labelValues ...string) Summary {
opts.BufCap = DefBufCap
}
if len(opts.Objectives) == 0 {
// Use the lock-free implementation of a Summary without objectives.
s := &noObjectivesSummary{
desc: desc,
labelPairs: makeLabelPairs(desc, labelValues),
counts: [2]*summaryCounts{&summaryCounts{}, &summaryCounts{}},
}
s.init(s) // Init self-collection.
return s
}
s := &summary{
desc: desc,
@@ -382,6 +395,142 @@ func (s *summary) swapBufs(now time.Time) {
}
}
type summaryCounts struct {
// sumBits contains the bits of the float64 representing the sum of all
// observations. sumBits and count have to go first in the struct to
// guarantee alignment for atomic operations.
// http://golang.org/pkg/sync/atomic/#pkg-note-BUG
sumBits uint64
count uint64
}
type noObjectivesSummary struct {
// countAndHotIdx is a complicated one. For lock-free yet atomic
// observations, we need to save the total count of observations again,
// combined with the index of the currently-hot counts struct, so that
// we can perform the operation on both values atomically. The least
// significant bit defines the hot counts struct. The remaining 63 bits
// represent the total count of observations. This happens under the
// assumption that the 63bit count will never overflow. Rationale: An
// observations takes about 30ns. Let's assume it could happen in
// 10ns. Overflowing the counter will then take at least (2^63)*10ns,
// which is about 3000 years.
//
// This has to be first in the struct for 64bit alignment. See
// http://golang.org/pkg/sync/atomic/#pkg-note-BUG
countAndHotIdx uint64
selfCollector
desc *Desc
writeMtx sync.Mutex // Only used in the Write method.
// Two counts, one is "hot" for lock-free observations, the other is
// "cold" for writing out a dto.Metric. It has to be an array of
// pointers to guarantee 64bit alignment of the histogramCounts, see
// http://golang.org/pkg/sync/atomic/#pkg-note-BUG.
counts [2]*summaryCounts
hotIdx int // Index of currently-hot counts. Only used within Write.
labelPairs []*dto.LabelPair
}
func (s *noObjectivesSummary) Desc() *Desc {
return s.desc
}
func (s *noObjectivesSummary) Observe(v float64) {
// We increment s.countAndHotIdx by 2 so that the counter in the upper
// 63 bits gets incremented by 1. At the same time, we get the new value
// back, which we can use to find the currently-hot counts.
n := atomic.AddUint64(&s.countAndHotIdx, 2)
hotCounts := s.counts[n%2]
for {
oldBits := atomic.LoadUint64(&hotCounts.sumBits)
newBits := math.Float64bits(math.Float64frombits(oldBits) + v)
if atomic.CompareAndSwapUint64(&hotCounts.sumBits, oldBits, newBits) {
break
}
}
// Increment count last as we take it as a signal that the observation
// is complete.
atomic.AddUint64(&hotCounts.count, 1)
}
func (s *noObjectivesSummary) Write(out *dto.Metric) error {
var (
sum = &dto.Summary{}
hotCounts, coldCounts *summaryCounts
count uint64
)
// For simplicity, we mutex the rest of this method. It is not in the
// hot path, i.e. Observe is called much more often than Write. The
// complication of making Write lock-free isn't worth it.
s.writeMtx.Lock()
defer s.writeMtx.Unlock()
// This is a bit arcane, which is why the following spells out this if
// clause in English:
//
// If the currently-hot counts struct is #0, we atomically increment
// s.countAndHotIdx by 1 so that from now on Observe will use the counts
// struct #1. Furthermore, the atomic increment gives us the new value,
// which, in its most significant 63 bits, tells us the count of
// observations done so far up to and including currently ongoing
// observations still using the counts struct just changed from hot to
// cold. To have a normal uint64 for the count, we bitshift by 1 and
// save the result in count. We also set s.hotIdx to 1 for the next
// Write call, and we will refer to counts #1 as hotCounts and to counts
// #0 as coldCounts.
//
// If the currently-hot counts struct is #1, we do the corresponding
// things the other way round. We have to _decrement_ s.countAndHotIdx
// (which is a bit arcane in itself, as we have to express -1 with an
// unsigned int...).
if s.hotIdx == 0 {
count = atomic.AddUint64(&s.countAndHotIdx, 1) >> 1
s.hotIdx = 1
hotCounts = s.counts[1]
coldCounts = s.counts[0]
} else {
count = atomic.AddUint64(&s.countAndHotIdx, ^uint64(0)) >> 1 // Decrement.
s.hotIdx = 0
hotCounts = s.counts[0]
coldCounts = s.counts[1]
}
// Now we have to wait for the now-declared-cold counts to actually cool
// down, i.e. wait for all observations still using it to finish. That's
// the case once the count in the cold counts struct is the same as the
// one atomically retrieved from the upper 63bits of s.countAndHotIdx.
for {
if count == atomic.LoadUint64(&coldCounts.count) {
break
}
runtime.Gosched() // Let observations get work done.
}
sum.SampleCount = proto.Uint64(count)
sum.SampleSum = proto.Float64(math.Float64frombits(atomic.LoadUint64(&coldCounts.sumBits)))
out.Summary = sum
out.Label = s.labelPairs
// Finally add all the cold counts to the new hot counts and reset the cold counts.
atomic.AddUint64(&hotCounts.count, count)
atomic.StoreUint64(&coldCounts.count, 0)
for {
oldBits := atomic.LoadUint64(&hotCounts.sumBits)
newBits := math.Float64bits(math.Float64frombits(oldBits) + sum.GetSampleSum())
if atomic.CompareAndSwapUint64(&hotCounts.sumBits, oldBits, newBits) {
atomic.StoreUint64(&coldCounts.sumBits, 0)
break
}
}
return nil
}
type quantSort []*dto.Quantile
func (s quantSort) Len() int {

201
vendor/github.com/prometheus/client_model/ruby/LICENSE сгенерированный поставляемый
Просмотреть файл

@@ -1,201 +0,0 @@
Apache License
Version 2.0, January 2004
http://www.apache.org/licenses/
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
1. Definitions.
"License" shall mean the terms and conditions for use, reproduction,
and distribution as defined by Sections 1 through 9 of this document.
"Licensor" shall mean the copyright owner or entity authorized by
the copyright owner that is granting the License.
"Legal Entity" shall mean the union of the acting entity and all
other entities that control, are controlled by, or are under common
control with that entity. For the purposes of this definition,
"control" means (i) the power, direct or indirect, to cause the
direction or management of such entity, whether by contract or
otherwise, or (ii) ownership of fifty percent (50%) or more of the
outstanding shares, or (iii) beneficial ownership of such entity.
"You" (or "Your") shall mean an individual or Legal Entity
exercising permissions granted by this License.
"Source" form shall mean the preferred form for making modifications,
including but not limited to software source code, documentation
source, and configuration files.
"Object" form shall mean any form resulting from mechanical
transformation or translation of a Source form, including but
not limited to compiled object code, generated documentation,
and conversions to other media types.
"Work" shall mean the work of authorship, whether in Source or
Object form, made available under the License, as indicated by a
copyright notice that is included in or attached to the work
(an example is provided in the Appendix below).
"Derivative Works" shall mean any work, whether in Source or Object
form, that is based on (or derived from) the Work and for which the
editorial revisions, annotations, elaborations, or other modifications
represent, as a whole, an original work of authorship. For the purposes
of this License, Derivative Works shall not include works that remain
separable from, or merely link (or bind by name) to the interfaces of,
the Work and Derivative Works thereof.
"Contribution" shall mean any work of authorship, including
the original version of the Work and any modifications or additions
to that Work or Derivative Works thereof, that is intentionally
submitted to Licensor for inclusion in the Work by the copyright owner
or by an individual or Legal Entity authorized to submit on behalf of
the copyright owner. For the purposes of this definition, "submitted"
means any form of electronic, verbal, or written communication sent
to the Licensor or its representatives, including but not limited to
communication on electronic mailing lists, source code control systems,
and issue tracking systems that are managed by, or on behalf of, the
Licensor for the purpose of discussing and improving the Work, but
excluding communication that is conspicuously marked or otherwise
designated in writing by the copyright owner as "Not a Contribution."
"Contributor" shall mean Licensor and any individual or Legal Entity
on behalf of whom a Contribution has been received by Licensor and
subsequently incorporated within the Work.
2. Grant of Copyright License. Subject to the terms and conditions of
this License, each Contributor hereby grants to You a perpetual,
worldwide, non-exclusive, no-charge, royalty-free, irrevocable
copyright license to reproduce, prepare Derivative Works of,
publicly display, publicly perform, sublicense, and distribute the
Work and such Derivative Works in Source or Object form.
3. Grant of Patent License. Subject to the terms and conditions of
this License, each Contributor hereby grants to You a perpetual,
worldwide, non-exclusive, no-charge, royalty-free, irrevocable
(except as stated in this section) patent license to make, have made,
use, offer to sell, sell, import, and otherwise transfer the Work,
where such license applies only to those patent claims licensable
by such Contributor that are necessarily infringed by their
Contribution(s) alone or by combination of their Contribution(s)
with the Work to which such Contribution(s) was submitted. If You
institute patent litigation against any entity (including a
cross-claim or counterclaim in a lawsuit) alleging that the Work
or a Contribution incorporated within the Work constitutes direct
or contributory patent infringement, then any patent licenses
granted to You under this License for that Work shall terminate
as of the date such litigation is filed.
4. Redistribution. You may reproduce and distribute copies of the
Work or Derivative Works thereof in any medium, with or without
modifications, and in Source or Object form, provided that You
meet the following conditions:
(a) You must give any other recipients of the Work or
Derivative Works a copy of this License; and
(b) You must cause any modified files to carry prominent notices
stating that You changed the files; and
(c) You must retain, in the Source form of any Derivative Works
that You distribute, all copyright, patent, trademark, and
attribution notices from the Source form of the Work,
excluding those notices that do not pertain to any part of
the Derivative Works; and
(d) If the Work includes a "NOTICE" text file as part of its
distribution, then any Derivative Works that You distribute must
include a readable copy of the attribution notices contained
within such NOTICE file, excluding those notices that do not
pertain to any part of the Derivative Works, in at least one
of the following places: within a NOTICE text file distributed
as part of the Derivative Works; within the Source form or
documentation, if provided along with the Derivative Works; or,
within a display generated by the Derivative Works, if and
wherever such third-party notices normally appear. The contents
of the NOTICE file are for informational purposes only and
do not modify the License. You may add Your own attribution
notices within Derivative Works that You distribute, alongside
or as an addendum to the NOTICE text from the Work, provided
that such additional attribution notices cannot be construed
as modifying the License.
You may add Your own copyright statement to Your modifications and
may provide additional or different license terms and conditions
for use, reproduction, or distribution of Your modifications, or
for any such Derivative Works as a whole, provided Your use,
reproduction, and distribution of the Work otherwise complies with
the conditions stated in this License.
5. Submission of Contributions. Unless You explicitly state otherwise,
any Contribution intentionally submitted for inclusion in the Work
by You to the Licensor shall be under the terms and conditions of
this License, without any additional terms or conditions.
Notwithstanding the above, nothing herein shall supersede or modify
the terms of any separate license agreement you may have executed
with Licensor regarding such Contributions.
6. Trademarks. This License does not grant permission to use the trade
names, trademarks, service marks, or product names of the Licensor,
except as required for reasonable and customary use in describing the
origin of the Work and reproducing the content of the NOTICE file.
7. Disclaimer of Warranty. Unless required by applicable law or
agreed to in writing, Licensor provides the Work (and each
Contributor provides its Contributions) on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
implied, including, without limitation, any warranties or conditions
of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
PARTICULAR PURPOSE. You are solely responsible for determining the
appropriateness of using or redistributing the Work and assume any
risks associated with Your exercise of permissions under this License.
8. Limitation of Liability. In no event and under no legal theory,
whether in tort (including negligence), contract, or otherwise,
unless required by applicable law (such as deliberate and grossly
negligent acts) or agreed to in writing, shall any Contributor be
liable to You for damages, including any direct, indirect, special,
incidental, or consequential damages of any character arising as a
result of this License or out of the use or inability to use the
Work (including but not limited to damages for loss of goodwill,
work stoppage, computer failure or malfunction, or any and all
other commercial damages or losses), even if such Contributor
has been advised of the possibility of such damages.
9. Accepting Warranty or Additional Liability. While redistributing
the Work or Derivative Works thereof, You may choose to offer,
and charge a fee for, acceptance of support, warranty, indemnity,
or other liability obligations and/or rights consistent with this
License. However, in accepting such obligations, You may act only
on Your own behalf and on Your sole responsibility, not on behalf
of any other Contributor, and only if You agree to indemnify,
defend, and hold each Contributor harmless for any liability
incurred by, or claims asserted against, such Contributor by reason
of your accepting any such warranty or additional liability.
END OF TERMS AND CONDITIONS
APPENDIX: How to apply the Apache License to your work.
To apply the Apache License to your work, attach the following
boilerplate notice, with the fields enclosed by brackets "[]"
replaced with your own identifying information. (Don't include
the brackets!) The text should be enclosed in the appropriate
comment syntax for the file format. We also recommend that a
file or class name and description of purpose be included on the
same "printed page" as the copyright notice for easier
identification within third-party archives.
Copyright [yyyy] [name of copyright owner]
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.

12
vendor/github.com/prometheus/common/expfmt/text_create.go сгенерированный поставляемый
Просмотреть файл

@@ -436,11 +436,11 @@ func writeEscapedString(w enhancedWriter, v string, includeDoubleQuote bool) (in
func writeFloat(w enhancedWriter, f float64) (int, error) {
switch {
case f == 1:
return w.WriteString("1.0")
return 1, w.WriteByte('1')
case f == 0:
return w.WriteString("0.0")
return 1, w.WriteByte('0')
case f == -1:
return w.WriteString("-1.0")
return w.WriteString("-1")
case math.IsNaN(f):
return w.WriteString("NaN")
case math.IsInf(f, +1):
@@ -450,12 +450,6 @@ func writeFloat(w enhancedWriter, f float64) (int, error) {
default:
bp := numBufPool.Get().(*[]byte)
*bp = strconv.AppendFloat((*bp)[:0], f, 'g', -1, 64)
// Add a .0 if used fixed point and there is no decimal
// point already. This is for future proofing with OpenMetrics,
// where floats always contain either an exponent or decimal.
if !bytes.ContainsAny(*bp, "e.") {
*bp = append(*bp, '.', '0')
}
written, err := w.Write(*bp)
numBufPool.Put(bp)
return written, err

10
vendor/github.com/prometheus/procfs/Makefile сгенерированный поставляемый
Просмотреть файл

@@ -17,14 +17,12 @@ include Makefile.common
./ttar -C $(dir $*) -x -f $*.ttar
touch $@
update_fixtures: fixtures.ttar sysfs/fixtures.ttar
%fixtures.ttar: %/fixtures
rm -v $(dir $*)fixtures/.unpacked
./ttar -C $(dir $*) -c -f $*fixtures.ttar fixtures/
update_fixtures:
rm -vf fixtures/.unpacked
./ttar -c -f fixtures.ttar fixtures/
.PHONY: build
build:
.PHONY: test
test: fixtures/.unpacked sysfs/fixtures/.unpacked common-test
test: fixtures/.unpacked common-test

81
vendor/github.com/prometheus/procfs/diskstats.go сгенерированный поставляемый Обычный файл
Просмотреть файл

@@ -0,0 +1,81 @@
// Copyright 2018 The Prometheus Authors
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package procfs
import (
"bufio"
"fmt"
"io"
"os"
"github.com/prometheus/procfs/iostats"
)
const (
diskstatsFilename = "diskstats"
statFormat = "%d %d %s %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d"
)
// NewDiskstats reads the diskstats file and returns
// an array of Diskstats (one per line/device)
func NewDiskstats() ([]iostats.IODeviceStats, error) {
fs, err := NewFS(DefaultMountPoint)
if err != nil {
return nil, err
}
return fs.NewDiskstats()
}
// NewDiskstats reads the diskstats file and returns
// an array of Diskstats (one per line/device)
func (fs FS) NewDiskstats() ([]iostats.IODeviceStats, error) {
file, err := os.Open(fs.Path(diskstatsFilename))
if err != nil {
return nil, err
}
defer file.Close()
diskstats := []iostats.IODeviceStats{}
scanner := bufio.NewScanner(file)
for scanner.Scan() {
d := &iostats.IODeviceStats{}
count, err := fmt.Sscanf(scanner.Text(), statFormat,
&d.MajorNumber,
&d.MinorNumber,
&d.DeviceName,
&d.ReadIOs,
&d.ReadMerges,
&d.ReadSectors,
&d.ReadTicks,
&d.WriteIOs,
&d.WriteMerges,
&d.WriteSectors,
&d.WriteTicks,
&d.IOsInProgress,
&d.IOsTotalTicks,
&d.WeightedIOTicks,
&d.DiscardIOs,
&d.DiscardMerges,
&d.DiscardSectors,
&d.DiscardTicks)
if err != nil && err != io.EOF {
return diskstats, err
}
if count == 14 || count == 18 {
diskstats = append(diskstats, *d)
}
}
return diskstats, nil
}

1428
vendor/github.com/prometheus/procfs/fixtures.ttar сгенерированный поставляемый

Разница между файлами не показана из-за своего большого размера Загрузить разницу

2
vendor/github.com/prometheus/procfs/go.mod сгенерированный поставляемый
Просмотреть файл

@@ -1 +1,3 @@
module github.com/prometheus/procfs
require golang.org/x/sync v0.0.0-20181221193216-37e7f081c4d4

2
vendor/github.com/prometheus/procfs/go.sum сгенерированный поставляемый Обычный файл
Просмотреть файл

@@ -0,0 +1,2 @@
golang.org/x/sync v0.0.0-20181221193216-37e7f081c4d4 h1:YUO/7uOKsKeq9UokNS62b8FYywz3ker1l1vDZRCRefw=
golang.org/x/sync v0.0.0-20181221193216-37e7f081c4d4/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=

14
vendor/github.com/prometheus/procfs/internal/util/parse.go сгенерированный поставляемый
Просмотреть файл

@@ -57,3 +57,17 @@ func ReadUintFromFile(path string) (uint64, error) {
}
return strconv.ParseUint(strings.TrimSpace(string(data)), 10, 64)
}
// ParseBool parses a string into a boolean pointer.
func ParseBool(b string) *bool {
var truth bool
switch b {
case "enabled":
truth = true
case "disabled":
truth = false
default:
return nil
}
return &truth
}

Просмотреть файл

@@ -11,7 +11,7 @@
// See the License for the specific language governing permissions and
// limitations under the License.
// +build !windows
// +build linux,!appengine
package util

26
vendor/github.com/prometheus/procfs/internal/util/sysreadfile_compat.go сгенерированный поставляемый Обычный файл
Просмотреть файл

@@ -0,0 +1,26 @@
// Copyright 2019 The Prometheus Authors
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// +build linux,appengine !linux
package util
import (
"fmt"
)
// SysReadFile is here implemented as a noop for builds that do not support
// the read syscall. For example Windows, or Linux on Google App Engine.
func SysReadFile(file string) (string, error) {
return "", fmt.Errorf("not supported on this platform")
}

67
vendor/github.com/prometheus/procfs/iostats/iostats.go сгенерированный поставляемый Обычный файл
Просмотреть файл

@@ -0,0 +1,67 @@
// Copyright 2018 The Prometheus Authors
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package iostats
// IODevice contains identifying information for an I/O device
type IODevice struct {
MajorNumber uint32
MinorNumber uint32
DeviceName string
}
// IOStats models the iostats data described in the kernel documentation
// https://www.kernel.org/doc/Documentation/iostats.txt,
// https://www.kernel.org/doc/Documentation/block/stat.txt,
// and https://www.kernel.org/doc/Documentation/ABI/testing/procfs-diskstats
type IOStats struct {
// ReadIOs is the number of reads completed successfully.
ReadIOs uint64
// ReadMerges is the number of reads merged. Reads and writes
// which are adjacent to each other may be merged for efficiency.
ReadMerges uint64
// ReadSectors is the total number of sectors read successfully.
ReadSectors uint64
// ReadTicks is the total number of milliseconds spent by all reads.
ReadTicks uint64
// WriteIOs is the total number of writes completed successfully.
WriteIOs uint64
// WriteMerges is the number of reads merged.
WriteMerges uint64
// WriteSectors is the total number of sectors written successfully.
WriteSectors uint64
// WriteTicks is the total number of milliseconds spent by all writes.
WriteTicks uint64
// IOsInProgress is number of I/Os currently in progress.
IOsInProgress uint64
// IOsTotalTicks is the number of milliseconds spent doing I/Os.
// This field increases so long as IosInProgress is nonzero.
IOsTotalTicks uint64
// WeightedIOTicks is the weighted number of milliseconds spent doing I/Os.
// This can also be used to estimate average queue wait time for requests.
WeightedIOTicks uint64
// DiscardIOs is the total number of discards completed successfully.
DiscardIOs uint64
// DiscardMerges is the number of discards merged.
DiscardMerges uint64
// DiscardSectors is the total number of sectors discarded successfully.
DiscardSectors uint64
// DiscardTicks is the total number of milliseconds spent by all discards.
DiscardTicks uint64
}
// IODeviceStats combines IODevice and IOStats
type IODeviceStats struct {
IODevice
IOStats
}

10
vendor/github.com/prometheus/procfs/mountstats.go сгенерированный поставляемый
Просмотреть файл

@@ -69,6 +69,8 @@ type MountStats interface {
type MountStatsNFS struct {
// The version of statistics provided.
StatVersion string
// The optional mountaddr of the NFS mount.
MountAddress string
// The age of the NFS mount.
Age time.Duration
// Statistics related to byte counters for various operations.
@@ -317,6 +319,7 @@ func parseMount(ss []string) (*Mount, error) {
func parseMountStatsNFS(s *bufio.Scanner, statVersion string) (*MountStatsNFS, error) {
// Field indicators for parsing specific types of data
const (
fieldOpts = "opts:"
fieldAge = "age:"
fieldBytes = "bytes:"
fieldEvents = "events:"
@@ -338,6 +341,13 @@ func parseMountStatsNFS(s *bufio.Scanner, statVersion string) (*MountStatsNFS, e
}
switch ss[0] {
case fieldOpts:
for _, opt := range strings.Split(ss[1], ",") {
split := strings.Split(opt, "=")
if len(split) == 2 && split[0] == "mountaddr" {
stats.MountAddress = split[1]
}
}
case fieldAge:
// Age integer is in seconds
d, err := time.ParseDuration(ss[1] + "s")

110
vendor/github.com/prometheus/procfs/proc_psi.go сгенерированный поставляемый Обычный файл
Просмотреть файл

@@ -0,0 +1,110 @@
// Copyright 2019 The Prometheus Authors
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package procfs
// The PSI / pressure interface is described at
// https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/accounting/psi.txt
// Each resource (cpu, io, memory, ...) is exposed as a single file.
// Each file may contain up to two lines, one for "some" pressure and one for "full" pressure.
// Each line contains several averages (over n seconds) and a total in µs.
//
// Example io pressure file:
// > some avg10=0.06 avg60=0.21 avg300=0.99 total=8537362
// > full avg10=0.00 avg60=0.13 avg300=0.96 total=8183134
import (
"fmt"
"io"
"io/ioutil"
"os"
"strings"
)
const lineFormat = "avg10=%f avg60=%f avg300=%f total=%d"
// PSILine is a single line of values as returned by /proc/pressure/*
// The Avg entries are averages over n seconds, as a percentage
// The Total line is in microseconds
type PSILine struct {
Avg10 float64
Avg60 float64
Avg300 float64
Total uint64
}
// PSIStats represent pressure stall information from /proc/pressure/*
// Some indicates the share of time in which at least some tasks are stalled
// Full indicates the share of time in which all non-idle tasks are stalled simultaneously
type PSIStats struct {
Some *PSILine
Full *PSILine
}
// NewPSIStatsForResource reads pressure stall information for the specified
// resource. At time of writing this can be either "cpu", "memory" or "io".
func NewPSIStatsForResource(resource string) (PSIStats, error) {
fs, err := NewFS(DefaultMountPoint)
if err != nil {
return PSIStats{}, err
}
return fs.NewPSIStatsForResource(resource)
}
// NewPSIStatsForResource reads pressure stall information from /proc/pressure/<resource>
func (fs FS) NewPSIStatsForResource(resource string) (PSIStats, error) {
file, err := os.Open(fs.Path(fmt.Sprintf("%s/%s", "pressure", resource)))
if err != nil {
return PSIStats{}, fmt.Errorf("psi_stats: unavailable for %s", resource)
}
defer file.Close()
return parsePSIStats(resource, file)
}
// parsePSIStats parses the specified file for pressure stall information
func parsePSIStats(resource string, file io.Reader) (PSIStats, error) {
psiStats := PSIStats{}
stats, err := ioutil.ReadAll(file)
if err != nil {
return psiStats, fmt.Errorf("psi_stats: unable to read data for %s", resource)
}
for _, l := range strings.Split(string(stats), "\n") {
prefix := strings.Split(l, " ")[0]
switch prefix {
case "some":
psi := PSILine{}
_, err := fmt.Sscanf(l, fmt.Sprintf("some %s", lineFormat), &psi.Avg10, &psi.Avg60, &psi.Avg300, &psi.Total)
if err != nil {
return PSIStats{}, err
}
psiStats.Some = &psi
case "full":
psi := PSILine{}
_, err := fmt.Sscanf(l, fmt.Sprintf("full %s", lineFormat), &psi.Avg10, &psi.Avg60, &psi.Avg300, &psi.Total)
if err != nil {
return PSIStats{}, err
}
psiStats.Full = &psi
default:
// If we encounter a line with an unknown prefix, ignore it and move on
// Should new measurement types be added in the future we'll simply ignore them instead
// of erroring on retrieval
continue
}
}
return psiStats, nil
}

4
vendor/github.com/prometheus/procfs/proc_stat.go сгенерированный поставляемый
Просмотреть файл

@@ -95,7 +95,7 @@ type ProcStat struct {
// in clock ticks.
Starttime uint64
// Virtual memory size in bytes.
VSize int
VSize uint
// Resident set size in pages.
RSS int
@@ -164,7 +164,7 @@ func (p Proc) NewStat() (ProcStat, error) {
}
// VirtualMemory returns the virtual memory size in bytes.
func (s ProcStat) VirtualMemory() int {
func (s ProcStat) VirtualMemory() uint {
return s.VSize
}

0
vendor/github.com/prometheus/procfs/ttar сгенерированный поставляемый Исполняемый файл → Обычный файл
Просмотреть файл